Bauma 2013 Braces for a Grand Success Once Again

bauma Germany 2013

At a glance
Show: bauma 2013
Frequency: Triennial
Dates: 15 to 21 April 2013
Venue: New Munich Trade Fair Centre, Munich
No of Exhibitors: 3,300
No of Visitors: 450,000
Exhibit Space: 570,000 sqm
For further details please contact:
Sabine Wagner
Fax. : +49 89 / 9 49-21489
Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
Website :

The 30th edition of bauma, the triennial International Trade Fair for Construction Machinery, Building Materials Machines, Mining Machines, Construction Vehicles, and Construction Equipment will take place from 15 to 21 April 2013 in Munich. The popularity of the show is expanding at an amazing pace since its inception and has been showing increasing number of exhibitors, visitors and products exhibiting space with each passing event. This year in bauma 2013, over 3,300 exhibitors are expects to display their products and services over an area of 570,000 sqm and over 450,000 visitors are likely to attend the show from across the globe.

During the last bauma, many were not able to attend the show due to flights ban for few days because of volcano ash that engulfed European skylines. So, this time it is expected a record-breaking gathering which has already been testified by the surging number of exhibitors in the waiting list. The demand for exhibition space is going up at an alarming pace and considering that 75,000 sqm of exhibition space has already been increased but still large numbers of exhibitors are in the waiting list.

bauma presents an absolutely comprehensive range of exhibiting space wherein each individual product group is represented clearly by the structured four theme-oriented sectors including Construction Sites, Mining, Extraction and Processing of Raw Materials, Production of Building materials and Components, and service suppliers.

The growth in the construction market worldwide is giving rise to a surge in demand for concrete products, concrete pipes and shafts as well as precast components. This demand is in turn boosting developments among the manufacturers of the machinery and plant that is used to produce these components. At bauma, a whole range of new products made of concrete and other materials will be on show at the booths of systems suppliers and components specialists, across the spectrum from newcomers to market leaders.

As Formwork and scaffolding are an essential part of building and construction, and the systems on offer are already very highly developed and efficient. Yet, again and again, the manufacturers in this segment keep coming up with new ideas and innovations. And the latest of these will be on show.

bauma China 2012

Among the many innovations at this show, a key focus will be on drive technology for mobile construction machinery. In addition, Energy-efficiency and fuel-saving are two of the main trends that will be in the spotlight too.

bauma is not only the leading international event for construction machinery, building material machines, construction vehicles and construction equipment – it is also the world's biggest trade fair for mining machinery. It has become an important business platform where the mining sector features a growing number of exhibitors and an increasingly international range of exhibits and simultaneously provided outstanding opportunities for networking and boosting business prospects.

Moreover, the organizers also arrange forums (international communication platforms) where exhibitors, trade associations and business partners can present the latest product developments, trends and comprehensive overview of the current market scenario. To tackle the ongoing shortage of engineers in the industry, a new forum THINK BIG is started with an objective to generate interest in the coming generation to shape up their future by joining the construction machinery and building-materials machines industry.

For this edition, bauma has chosen Indonesia as the partner country. The country's building industry is booming and in the raw materials sector, too, major investment is scheduled for the mid-term – all of which are good reasons why bauma focused more closely on this economic region and the exciting opportunities it offers for the future.

The nominations for the bauma Innovation Award 2013, which is being presented as part of bauma, were already announced at the press conference held at the bauma Media Dialog in January in Munich. The award is divided into five categories i.e Machinery, Machinery components, Construction process/Construction work, Research and Design. Out of a total of 156 submissions from Germany and abroad, the jury selected three groundbreaking innovations per category to go through to the final round. Most of the new developments will also be on show at bauma.

bauma is currently at the peak of its excellence as it is not just exceeding in terms of the quantity, but also the quality of participants who are the decision makers. The show gives opportunities to visitors to experience the presentation of various innovative and new developments that are going to be introduced in the show for the first time. Besides, it provides a unique atmosphere to participants to cultivate and strengthen their business ties by inking new contacts thereby pushing their business to newer heights.


HAULOTTE GROUP, the people and material lifting equipment specialist is going to participate at bauma and will exhibit a range of products including articulated Big Boom range HA32 PX, new HT23 RTJ, new rough-terrain scissor lift compact range Compact10 DX and Compact12 DX, Electric scissor lift Compact 14, Vertical masts Star 10, Electric articulating booms HA12 CJ+, new Telehandler range HTL 4017, and HTL 3510 etc. to perfectly meet its customer requirements.

HA32 PX is equipped with an ergonomic control box, oscillating axle and differential lock for maximum comfort and maximum productivity. It is ideally suited to work on construction sites, the shipping industry and shipyards, and also the chemical, petrochemical, and aviation industries.

The new HT23 RTJ, the best performer in its class, breaks records; platform working height 22.5m, horizontal outreach 18.3m, around 1m higher than industry standards, dual load system available as an option. It has an incomparable lifting speed; 56 seconds is enough to reach full height, increasing productivity two fold in this product segment besides having an optimal maneuverability; the best turning radius of its class with 4 wheel steer and drive making it easy to operate on congested building sites and/or in tight spaces.

NEW HT21 RT offers the same benefits with platform working height 20.6m and horizontal outreach 15.9m. The new compact range Compact10 DX and Compact12 DX is highly maneuverable and compact: featuring a new Kubota engine, complying with the new Tier IV standard, this range has excellent rough-terrain capability with 4-wheel drive, a ground clearance of 27cm and a hydraulic differential lock that can climb steep slopes enabling them to work efficiently on rough-terrain. A new outrigger design gives added strength and there is now one switch to retract and deploy the 4 outriggers at the same time.

In addition to many innovative products, Haulotte will also present EASY SPARE PARTS (ESP) website. ESP is the Haulotte Group tool that customers can use to consult technical documentation and to order spare parts online. To improve the quality of service for its customers and to make the tool even easier to use, Haulotte Services is updating ESP.


Ahead of the introduction of further EU Stage IV and U.S. EPA Tier 4 Final emissions regulations, Perkins, one of the leading suppliers of off-highway diesel and gas engines is showcasing its complete line up of Stage IV/Tier 4 Final engines up to 225 kW (300 hp), at this year's bauma.

The new compact four cylinder 854F-E34TA will spearhead the range on show, which will comprise engines from the company's 400 and 1200 Series as well. The new model incorporates specially optimized Selective Catalytic Reduction (SCR) technology for the first time. This is packaged separately from the Diesel Oxidation Catalyst (DOC) module, giving OEMs greater installation flexibility in the engine bay. Space saving is further enhanced through the absence of a Diesel Particulate Filter (DPF).

Performance from the 854F-E34TA has been boosted to 90 kW (121 hp) while the 8 percent improvement in specific fuel consumption (SFC) gained at Stage IIIB/Tier 4 Interim has been retained. Heat rejection remains similar to its predecessor meaning no major changes to the size of the cooling pack, helping to maintain the engine's compact dimensions.

Alongside the 854F-E34TA, models on display include the single turbo 1206F-E70TA, which for OEMs wanting lots of torque at low speed, offers up to 151 kW (202 hp) at 2200 rpm with maximum torque of 870 Nm at 1400 rpm. In developing the 1200 Series Perkins sought to minimize the impact of the aftertreatment required to meet Stage IV/Tier 4 Final requirements, in particular the significant reduction in NOx. Perkins has achieved this through packaging the DOC / DPF canister and the SCR system into one integrated module, which can be positioned remotely in a machine chassis or directly on top of the engine.


ALLU has years of experience in running and inventing new methods and equipment for earthmoving sector. This year Finland origin ALLU brings new innovations to the market again. With mass stabilisation, which is still quite a new method, soft soil masses and even contaminated soils can be transformed into solid and usable land. With the new ALLU 3D Positioning System mass stabilisation work can be performed more accurately and easily than ever before. Also ALLU Screener Crusher family is expanding with new models and in addition new screening technology for bucket type screening devices will be launched. ALLU will present its Screener Crushers and Stabilisation Systems at bauma.

The mass stabilisation process is carried out by feeding dry powder like binder from a pressure feeder via hose to the mixing head mounted on an excavator. The mixing head is positioned to the right place on the work area with the help of the new ALLU 3D Positioning System. The ALLU 3D Positioning System consists of 4 modules: computer unit with software, touch screen, base station and gps-sensor utilizing gps -signals.


The new ALLU 3D Positioning System guides the base machine operator to feed right amount of binder and to mix adequately each block of the site. It also tells when to change location and start stabilising from another point. Thus it eases the performance of the mixing work, ensures homogenous mixing results and accurate binder feeding as well as reduces the consumption of the binder. As the end result higher quality and better job site economy can be reached. The new ALLU 3D Positioning System can be mounted on every ALLU Stabilisation System, new or old.

Linden Comansa and BKL Baukran Logistik

The Spanish tower crane manufacturer Linden Comansa, and its official distributor in Germany, BKL Baukran Logistik GmbH, have decided to exhibit together at bauma. They had participated in the previous editions of this leading construction machinery trade show, but this time Comansa and BKL will share the same exhibiting space and booth, which will assure a very busy and successful Bauma for both companies.

Linden Comansa

Regarding the machinery presented at the fair, Linden Comansa will show two cranes that have never been exhibited in any trade show: a 16 LC 260 flat-top tower crane from their recent LC1600 Series and an LCL 165 luffing jib crane. BKL Baukran Logistik GmbH will exhibit the hydraulic crane BKL System Cattaneo CM 90S4 developed together with Cattaneo.

BKL Baukran Logistik GmbH is one of Germany's most important rental companies and owns one of the biggest fleets in Central Europe. The company has offices in Munich, Frankfurt, and Hannover.


LiuGong Machinery Corp. will demonstrate its strength as a full line manufacturer at Bauma, showing 28 machines and introducing two new machines to the European market. The show is LiuGong's largest presence at Bauma ever – more than double in scope from three years ago. Notably this year, LiuGong will display its machines in a shared space with its subsidiary -- Dressta -- side-by-side. LiuGong will also unveil its new 945E excavator and 375B skid steer at the show and present rollers, motor graders, wheel loaders, forklifts, and skid steer loaders.

LiuGong will demonstrate its mastery of excavators by showing 7 machines that exemplify the products range. The machines start with the nimble 4,000 kg 904D, useful for repair jobs in tight construction spaces, then graduate up to the new 945E that can handle the big digs. In all, LiuGong will show the 904D IIIA, 906D IIIA, 915D IIIA, 922E IIIB, 925E IIIB, 930E II, 945E II excavators; the 835 III, 842 IV (Stage IIIB), 862 II and the 888 III wheel loaders; the 611H IIIA, 6024 IIIB, 6026 IIIB, 6028 IIIB rollers; the 418 IV motor grader; the 328, 375B and 385B skid steer; and the 2025H, 2025H (LPG) and 2015A forklifts.

Liugong Skid Steer Loader

Dressta will show its model 9.50M side shift backhoe, an SB-30M pipe layer and four bulldozers; models TD-10R, TD-14M, TD-25M and TD-40E. From the easily transportable 9,760 kg TD-10R machine to the massive 67,700 kg TD-40E, visitors will gain an appreciation for Dressta's respected bulldozer technology. LiuGong acquired the Poland-based Dressta in early 2012, and since then it has invested in expansions to its manufacturing facility there.


Sandvik is participating at bauma with a number of new products from its range including a drill rig DC125R, cone crusher – CH550, horizontal impact crushers CI5** Prisec TM, Alpha 330 drilling tool system, lifting tool 'Sandlock', two new models from Sandvik Mobile Crushers, and Screens range.

DC125R is a fully remote-controlled, hydraulic and self-propelled mini-sized drilling unit on a 4-wheel drive carrier, for drilling of 22 – 45 mm holes. The new model replaces the former Sandvik DC122R, one in the series of rigs originally launched in 1988 under the product name of Tamrock Commando. DC125R offers better maneuverability than ever before due to the new large drive gears that make the rig invincibly nimble and mobile, guaranteeing safety of operation even in the most difficult ground conditions. Rough terrain safety is further enhanced by a new winch with roller-type of rope guides.

Sandvik DC125R

Sandvik Construction Mobile Crushers and Screens will officially launch two new additions to their advanced product offering, thereby demonstrating continuous commitment to new product development. The latest incarnation of the original E7 mobile scalper demonstrates the value of customer feedback and experience, as the new model contains a "wish list" of features that include: Enormous increase in stockpiling capacity, Wider oversize conveyor to handle larger material, Heavy duty apron feeder with increased feed hopper size, Aggressive screen box action to maximize enhanced product handling and delivery capability, and user-friendly color-coded control panel with sequential start for ease of operation.


Also being showcased for the first time on the international stage will be a new Impactor model which will further enhance Sandvik's extensive crusher portfolio. This new model will possess many customer benefits such as: Large feed hopper with highly efficient pre-screening, Underpan feeder to reduce any spillage issues and protect the main product conveyor from high velocity material from the rotor, Excellent reduction ratio with impressive rates of production, user-friendly PLC control system and color screen for ease of operation, and Low wear, easy maintenance, and a low cost per ton.

Besides these, Sandvik developed a brand new cone crusher – CH550 which will provide customers with optimum performance and good cubical shape, whilst ensuring the lowest operating cost per ton for a wide range of materials and applications. The all new patented Sandvik CH550 is based on the proven HYDROCONE TM design, with the CH550 combining the ability to produce excellent shaped products, in fewer crushing stages, thereby making it adaptable to ever-changing customer requirements.

The company will also introduce New Prisec TM CI5**, the new generation of compact horizontal impact crushers (HSI) that has the ability to configure one base crusher into either a Primary or a Secondary configuration, thereby making it adaptable to ever-changing requirement.

In order to match the increased energy output from modern high power rock drills now used in drilling and tunneling, Sandvik will launch the Alpha 330 drilling tool system. This advanced system has been developed with special features that control power and, most importantly, ensure that this power is transmitted into the rock as efficiently, accurately, and economically as possible.


Aerial lift manufacturer Snorkel is going to launch three new global products- a compact rough terrain scissor lift S3970RT, a self-propelled low-level access platform S1030E, and a self-propelled mast lift M1230E at Bauma 2013.

The S3970RT is a compact rough terrain scissor lift, designed for working in confined spaces, such as in between buildings. Built on Snorkel's proven SRT chassis, the S3970RT provides a maximum platform height of 11.5m (39ft) but is only 1.77m (70ins) wide. Suitable for rough terrain applications, the S3970RT has 4WD, an articulating rear axle, 350mm of ground clearance and 30% gradeability. Standard features include automatic self-levelling stabilisers and a 1.2m extension deck for additional outreach.

The S3970RT joins the two established products in the Snorkel SRT series; the S3370RT and S2770RT. Like these lifts, the S3970RT is powered by a Kubota diesel engine, but is also available with a petrol engine, LPG, or a petrol-LPG combination. It is also available as the S3970BE bi-energy model. This versatile drive train allows the operator to work outdoors on the diesel engine, then switch to an electric motor for emissions legislation compliance when working inside buildings.

The robust reverse concentric mast design gives the M1230E its excellent lift capacity of 227kg (113kg with the deck extended) and an extremely stable work platform, even when fully elevated. Versatile; simple to service and repair, easy to use, and with an all-steel chassis for durability, the M1230E is an ideal hire or rental product.


At BAUMA, LINTEC will present new asphalt- and concrete mixing plants to round up its products range and continues to put special emphasis on the subjects energy saving and the recycling of RAP (recycled asphalt pavement). The new developments that would be exhibited in the show are:

A) The LINTEC hot recycling system in combination with a possible cold recycling addition, is a modular system that ensures the addition of up to 60% hot, respectively 25% cold RAP. Due to its flexibility, the system is not only available for new plants but also is specially qualified for the retrofitting of existing asphalt mixing plants.


B) The "ACS" (Aggregate Cooling System) is a new, patented and fully containerized plant concept for the cooling of aggregates for concrete mixes. The system also works at desert environment without the addition of ice. ACS can be used for new plants as well as for retrofitting.

C) Apart from these world debuts, LINTEC will present 2 new fully containerized asphalt mixing plants: The new CSD 1500 with integrated hot storage and the CSM 2500 with integrated hot-/cold recycling system.


MOBA Mobile Automation AG is presenting its new and proven solutions for mobile automation. In addition to the new variants of the Big Sonic-Ski® levelling system and an innovative scanner variant of the PAVE-IR™ quality control system for asphalt paving, MOBA is presenting its new levelling system for earthworking applications, MOBA 3D-matic with integrated 2D/3D controller and the excavation systems of the new Xsite line. Moreover, it is presenting new features of its drilling and roller systems and a cross-section of the line of machine controls for nearly all machines used in road-construction and earthworking applications. The company will also be exhibiting safety technologies, the MOBA product platform and the MOBA Community at the world's largest trade fair for the construction industry.

MOBA 3D matic on Machine

With the new 3D-matic, MOBA offers a precise and flexible 3D levelling system for graders, caterpillars and dozer blades that can also be used as a 2D system if necessary. MOBA 3D-matic increases efficiency in machine use and contributes to fast and precise project execution. The compact "2 in 1" controller combines 2D and 3D computers in a single housing. The display as well as sensors is also designed for use in 3D and 2D applications. Depending on the project, the operator can thus work with 3D or 2D.

MOBA 4er Big Sonic Ski

The 3D planning data are made available to the system via a data carrier. The position of the machine is ascertained with the GNSS sensor or, alternatively, total station. The controller compares the machine position with design data and calculates the deviations. Corrections for these deviations are performed quickly and precisely in the blade controller. MOBA 3D-matic scores with simple and straight forward menu navigation and a clearly arranged, 7 inch, touch-screen display.


As a leading manufacturer of construction products, Husqvarna continuously strive towards offering their customers innovative and powerful machines. As a result, the company is now launching a completely new range of electric products based on high frequency technique. The high frequency range is distinguished by the superior ergonomics and high power-to-weight-ratio. First out are a power cutter and a drill motor with a corresponding power pack. The product that would be exhibited at the show includes DXR 300, DXR 270, K 760, Diagrip2™ etc.

Husqvarna HCD10 0106

The new Husqvarna DXR 300 is a powerful addition to Husqvarna's range of remote demolition robots. With 22 kW, the robust DXR 300 offers efficient demolition in tough environments. Husqvarna DXR 300 is equipped with the new out-riggers, which will be a standard feature on DXR 270, DXR 300 and DXR 310 from 2013. The new out-riggers are 160 cm wider than the existing setup, which means they will provide increased robot stability and have the ability to carry more than 400 kg of workload. Nevertheless, DXR 300 weighs only 1,960 kg, which makes it the lightest remote demolition robot in its segment.

High cutting speed, improved flexibility and top balance of speed and tool life are the features that an updated Diagrip2™ will offer to its users. Diagrip2™ features a high concentration of diamonds with cutting edges optimally and evenly distributed in the segments around the tool. This makes the cutting capacity of every diamond maximized. The optimal diamond positioning of the Diagrip™ technology means that the diamonds are constantly exposed, which in combination with the Diagrip2™ features gets energy and torque focused on the diamond cutting edges. The result is a very even and powerful sawing with a minimum of unnecessary friction.


PERI is showcasing new and established products for formwork, scaffolding and engineering at the show. It is not only using the trade fair as an opportunity to exhibit innovative equipment, system expansions and other developments but it will serve as an international platform to present its project-related services to customers and interested visitors.

At bauma, Peri will exhibit its MAXIMO wall formwork systems, Lightweight PERI wall formwork systems along with new or improved system components such as SKYDECK and VARIODECK. It will also present new products, equipment and systems for falsework applications and civil engineering besides new types of climbing brackets which have already been put to use very successfully on the expansion of the Panama Canal. The stable SCS brackets are used to support the high loads from the fresh concrete pressure for single-face applications without formwork ties. The new SCS modular system has some decisive advantages compared to the well-established PERI climbing system, including a higher load capacity and increased flexibility.

Peri Schalungsmaschine

Visitors will also be able to see other new solutions for the construction on cantilevered parapets. This includes a new cantilevered parapet bracket with lightweight individual parts and improved adaptability to the parapet geometry. There are also system improvements for the cantilevered parapet carriage, which has many advantages for longer bridge structures.

PERI is presenting all applications of the PERI UP scaffolding system whereas Modular scaffolding PERI UP Rosett Flex will also be in the spotlight which provides maximum flexibility in 25-cm increments, but also offers the highest working safety. A new, lighter deck will also be on show.

Beyond these, PERI experts will also be demonstrating in Munich how PERI services can make all processes relating to formwork and scaffolding even more efficient for users. In addition to above, myPERI online portal will be presented in detail to the international public for the first time at the bauma 2013 which enables its customers to access extensive technical information and specific project data for their construction sites around the clock.

Raimondi Cranes

Raimondi will exhibit its 3 main products at Bauma 2013; MRT144, MRT111, and Deluxe Cabin. To begin with, Raimondi's newest model MRT144 is a flattop crane which will be displayed on a 4.5m cross base with a 65m jib. This is a very special crane and its technology is so far unmatched in the industry. This technology is called "AS40-08t-s", which allows 8 tonne maximum lifting capacity with a gearless hoist motor in single reeving/two fold mode and 1.4t is possible at maximum radius. The motor is a 40hp inverter with the possibility of 200m or 450m of rope with a Lebus drum which means less horsepower lifts the same load with faster speed. This crane can also be equipped with other hoist motor configurations allowing up to a 60hp inverter with 10t maximum capacity and up to 780m of hoist rope capacity on the drum.

Raimondli Cranes CABIN OUT

Secondly, the ever popular MRT111 counter jib will be on display at ground level. This model has been a very popular-versatile crane across the world and is currently Raimondi's best selling model. The MRT111 is also a flattop crane and has a maximum jib of 60m and can lift up to 8t and almost 1.4t at radius with a 60hp inverter.

Raimondli Cranes

Furthermore, Raimondi will also exhibit its trademark Deluxe Cabin that is made according to exclusive design wherein quality, functionality, and style are kept in balance. It has been conceived and improved on, after years of experience, feedback from the company's clients, and emphasis on innovation that really works. The cabin meets the most rigorous international norms of safety and quality. Among its specifications, visitors can find approximately 180° vision for the crane operator, a double reflective chamber to keep temperature stable and providing much needed protection from sun glare, ergonomic seat, easily accessible controls, multilingual touchscreen display that allows advanced technology to be at the fingertips of the operator, and much more!

Alimak Hek

Alimak Hek TPL
The Alimak Hek Group is the leading supplier of mast climbing equipment and added value services for both temporary and permanent installations providing the most cost-efficient, reliable, and flexible vertical access solutions for people and materials in the construction and general industry. The company will launch new transport platforms in the light range at Bauma this year. The company is extending its light range with the introduction of HEK TPL 500 & 300 and HEK TPL TWIN MAST.

HEK TPL 500 & 300's flexible, robust and simple design makes it suitable for all vertical access, including direct to buildings and scaffoldings, for new construction or for refurbishment work. The TPL 500 & 300 is designed to offer the most cost efficient vertical transport solution on site and is delivered in either three phase 500 kg capacity or 300 kg single phase configuration. Each unit has dual functionality, and can be used as either a transport platform or material hoist.

HEK TPL TWIN MAST meets the specific needs of the market, which demands increasingly high performance machinery – versatile and easy to use, with optimized weight and resistance. The result of Alimak Hek research, which has built on the success of the company's other lightweight models, is a transport platform that can also act as a material hoist. This model is notable for its flexibility, ease of use and robust design, making it highly competitive and ideal for any vertical access application, on buildings and scaffolding, in both new constructions and renovations.

The Hek medium range mast climbing work platforms and transport platforms as well as the heavy range of Alimak construction hoists and the latest heavy goods and passenger elevator for permanent installation in industrial environments, the Alimak SE-H - with larger and stronger cars - will also be exhibited this year.


Lombardini KD15 FRONT
Within the Kohler Global Power Group, Kohler Engines and its subsidiary Lombardini Srl respectively produce petrol engines (up to 30.0kW) and Diesel engines (up to 56.0kW) marketed throughout the world under the brand names of KOHLER and LOMBARDINI.

In order to meet ever increasing market demands, the Kohler/Lombardini group has been updating its range of air-cooled, single cylinder diesel engines. Now, it is presenting the new KD15-440 engine, which, with its advanced technical features, strengthens and improves the current 15LD engine series - elevating it to the very top of the class within its power range.

The 15LD440 model, already a market leader in numerous sectors including: agriculture, construction, generating sets and pumps, has been substantially updated. Now re-branded as the KD15-440, the new engine has improved performance, reduced maintenance costs and increased ease of use for the operator.

The new KD15-440 air-cooled single cylinder engine, with a displacement of 441 cc's, is becoming the "best in class" within its power range. Benefiting from its innovative air filter and tank, the KD15 model has become the ideal engine to provide the operator with the longest time between maintenance intervals. However, when required, the task to replace the filter cartridge is simple.

Wacker Neuson

At bauma, Wacker Neuson will exhibit the group's entire product consisting of the business units of concrete technology, compaction technology and construction site technology with products from demolition technology, power generation, lighting technology and pumps as well as compact machines, such as excavators, wheel loaders, dumpers and compact loaders and will create a world of experiences for the visitors. All facets regarding original spare parts, repair, maintenance, warranty, used machines, telematics, training and financing will be made into an experience.

Wacker Neuson Light Tower

The group brand Kramer Allrad will exhibit its products wheel loaders, tele wheel loaders and telehandlers while Wacker Neuson's proven demolition hammers will be presented with a new name at the show. The weight will no longer set the tone in the name, but rather, starting in 2013, the focus will be on the single stroke impact energy. The hammers BH 55, BH 65 and the technically reworked EH 75 remain the first choice when it comes to demanding requirements of professional end users. A special feature is the BH 55rw, which is specifically suited for track construction and perfectly tamps railroad ballast with a high percussion rate. Even lighter than its predecessor EH 23 in terms of weight, the new EH 50 is presented with just over 20 kg and a uniform impact performance of 50 joules of single stroke impact energy. The intelligent full-hood spring mounting allows for low hand-arm vibrations below 5 m/s2 and offers the user plenty of comfort.

Wacker Neuson is also presenting its completely revised floor saw series with four model sizes. The floor saw products range offers blade diameters ranging from 350 millimeters, 400 and 450 millimeters up to 500 millimeters. All model versions are up to 20% faster than comparable devices so that the BFS series offers the highest cutting speed with a quiet operation.

Wacker Neuson
In the area of lighting technology, there will be two new products: The Light Tower LTN 6 LV and a light balloon LBS 80. Furthermore, the new version of the Wacker Neuson articulated joint trench roller RTx will be shown at Bauma for the first time. With this new roller, customers get two machines in one: While in the past only the use of a roller with narrow drums was required for compacting very narrow trenches, customers with the new RTx can simply detach the newly designed attachment drums, thereby reducing the operating width from 82 cm to 56 cm. After use, the attachment drums can be re-attached easily so that the full surface capacity is available for wider trenches.

The company will present some new products in the Zero Tail series in the excavator area as well. Among others, the EZ28 (successor of the 28Z3) will be shown in a new look. In the area of compact machines, Wacker Neuson will also present alternative drive concepts and the study "Earth Movement of the Future."


Controls will display its PAVELAB® SYSTEMS and the new AUTOMAX range at bauma

Controls PAVELAB
PAVELAB® SYSTEMS is the new asphalt division of CONTROLS with an ambitious mission to set a benchmark of excellence in specialized systems for advanced testing of pavement materials. From sample preparation to tests for mix design determination and research, from durability tests to production and process control, PAVELAB® SYSTEMS is able to cover everything with a range of high tech products. These products benefit from CONTROLS' long presence in this specialized sector and advanced proprietary technologies in static and dynamic systems, developed as a result of years of investment in research and development with a team of highly qualified experts.

The new PAVELAB® SYSTEMS product line incorporates the "CVI-TECH concept" which has the aim of manufacturing and delivering products/services capable of maximizing value to the client in terms of Best quality/price ratio, Conformity to Standards, Quality and repeatability of industrial production, Ergonomics and design, Qualified after sales service to maintain the highest efficiency of machines even with intensive use, Modular and expandable systems allowing new functions and higher-level upgrades to be added long after the initial purchase, thus allowing the investment to be spread over different phases and Maintaining value over time.

Some of PAVELAB® SYSTEMS new products on display at Bauma will be PAVELAB advanced multi-size slab compactor, for slabs 500 x 300 mm, 410 x 300 mm and 300 x 300 mm; PAVELAB wet (Hamburg type) and dry double wheel tracker; PAVELAB high performance ductility meter; PAVELAB automatic closed type bitumen extractor by solvent and PAVELAB Gyrocomp, gyratory compactor series.

The range also includes the well-known Dynapave machines for dynamic testing on road paving materials.

CONTROLS will present a world premiere of the new AUTOMAX range at the show. As per the tradition of the glorious AUTOMAX models, the new range is revolutionary and occupies a key position within the new SMART-Line and COMPACT-Line models. It's a range of unique machines designed following the innovative CVI concept which mix functionality, performances, modular expandability, ergonomics, power saving.


Manitou will display its three-in-one Rotative Telescopic Handler MRT Series which according to a company is a crane, a telehandler and a platform. Besides this, the company will feature its new M-series rough terrain forklift M30 + M50 and also Gehl V400 and Mustang 4000V Skid Loader at its booth.

Manitou Crane
The MRT-Series is the most versatile telehandler on the market, offering rotation and 3-in-1 versatility for multiple applications. The MRT Series of rotating telehandlers will lift loads, or personnel, to heights from 68 to 80 feet (14 to 30 meters). Loads from 8,800 to 10,000 pounds are easily handled by these versatile machines. The wide range of attachments available, and the 360° rotation, makes the MRT the right choice for industrial maintenance, structural work, and other jobs around your construction site.

The machine now comes with a Mercedes engine and an attachment recognition system to make the changing of attachments easier. It now also comes with an automatic stabilization pattern that reads the terrain and automatically creates the most stable base in setting the stabilizers. In addition, it now also has a new color display monitor and a see-through roof that lets operators always see the boom as they work.

MANITOU M-Series masted forklifts were designed from the ground up as a true rough terrain lift truck. Operator comfort and easy maintenance were priority issues considered during development. The M- Series is available in many configurations to provide its customers the correct machine. MANITOU Semi-Industrial ranges are a smaller version that offers excellent handling and compact maneuverability, unbeatable traction, unequalled comfort, and easy maintenance. This range is the ideal choice for applications that demand more than the average industrial lift truck.

Wirtgen Group

Four strong brands, more than 90 innovative exhibits, 29 of which are pioneering world premieres, 10,560 m2 of exhibition space and over 100 experienced specialists: these impressive figures describe the Wirtgen Group at bauma 2013 and demonstrate its innovative force in the Road and Mineral Technologies business segments.

Wirtgen Group Messestand bauma-2013

With their advanced solutions, the strong Wirtgen, Vögele, Hamm and Kleemann brandsare once again setting the pace in the industry. Tailored closely to needs in the field, the new Wirtgen Group machines offer customers added value that greatly facilitates their everyday work at the construction site, mine or quarry.

With six world premieres, Wirtgen is ringing in a new era in roadway construction. Be it new construction or rehabilitation, road building companies are ideally equipped to meet any challenge with the two, new-generation cold recyclers and soil stabilizers as well as slipform pavers.

Maximum process reliability, lower fuel consumption, greater ease of operation: that is the new "dash3" generation from Vögele. Eleven world premieres among the road pavers and extending screeds can be seen live at bauma 2013.

With world premieres in the H, HD+ and HD CompactLine product families, Hamm rounds out its range of high-quality vibratory compactors and tandem rollers. Efficiency is the keyword for the future of compaction technology. The new MOBICAT EVO line of mobile jaw crushers sets new standards in the contractor market. The three world premieres from Kleemann boast high efficiency and versatility.

Wirtgen Group MC110

In line with its theme "Innovative Solutions for Road and Mineral Technologies" –the Wirtgen Group is showing not only world premieres, but also an impressive cross-section of its full-service portfolio. The dimensions of Wirtgen Group's trade show stand are equally as impressive. The total area has increased considerably since bauma 2010; in fact, the Wirtgen Group has the third-largest exhibition space at bauma 2013. As if that were not enough, the stand has even grown vertically: visitors can discover the Wirtgen Group world on two levels for the first time in 2013. While the hardware is on display on the ground floor in the product area and technology centers, customers can experience the Wirtgen Group's other services on the second floor. From application consulting/training and financial solutions to customer service, visitors learn here how the Wirtgen Group lives up to its pledge "close to our customers"every day.

Experts for the Wirtgen, Vögele, Hamm and Kleemann brands, and from the 55 sales and service companies worldwide, will be on hand at bauma 2013 to answer any questions surrounding road and mineral technologies.


At bauma, BOMAG will feature innovations and world premieres in each of its business sectors - Light Equipment, Asphalt and Soil Compaction - as well as with specialist machines. Under the watchword "City Action" visitors to the BOMAG demo areas can gauge the robustness, ergonomics and handling features of the full model line-up in the tamper range plus other BOMAG light equipment units – all of them being ideally suited for use on inner-city sites. Among others, the company will introduce the optimized dark "faced" BPR reversible plates equipped for the toughest site conditions. Also it will launch three new tamper models BVT 65, BT 65, and BT 60 which are designed to meet the toughest site demands and are set to become the latest BOMAG standard-setting units to hit the market.

bauma 2013 has also been chosen for the world premiere of the new series 5 articulated tandem rollers in the weight class 6 - 8 t. These compact, user-friendly, economical and manoeuvrable rollers are designed for small to medium size job sites. bauma will also see the world premiere of the new BF 900 C finisher, whose new auger and scraper chain drives allow high volumes of asphalt to be conveyed and spread smoothly and efficiently.

Bomag 01d BF 900 C

The BOMAG earthworks division has a number of innovations on offer as well! The highlight is the new generation of single drum rollers in the 5 – 8 t class, which will be on show for the first time. These highly compact and economical machines meet the toughest requirements for compaction, gradeability, and efficiency.

BOMAG is also going to launch the new MPH 600 with its unique FLEX MIX Technology. In addition, the company is showing the new additive spreader series including the flagship model BS 160000 PROFI with 16 m3 capacity and fully automatic metering control.


Kaiser will present its innovatively designed new S-Line mobile excavators at bauma Germany-13 which has also been nominated for bauma Innovation Award 2013. Rounded bodywork, enhanced ergonomics and optimised optional equipment not only create visual harmony but also ensure a significant increase in driver comfort.

The new generation of walking mobile excavators reveals a consistent focus on dynamic and at the same time functional design of every element of the vehicle – whether it's the cab interior, the field of vision inside and out of the cab or the positioning of the heating and air-conditioning system. The cab and superstructure form a single unit which in turn harmonises with the vehicle as a whole. The new design is based on the principle of a compact radius excavator, offering outstanding all-round visibility of the entire working zone. The driver has a direct view of each of the excavator's pads from the cab.

Integration of the new, significantly more powerful drive and cooling system called for innovative technological concepts and presented a major challenge in the design phase. When it came to developing and designing the new walking mobile excavators, KAISER benefited from the excellent collaboration between its own development team and established industrial designers from the firm "Design Department" based in Linz, Austria.


Walking mobile excavators are built for deployment in arduous and inaccessible terrain. The driver commonly spends more time on the job compared with other construction sites. For that reason the cab has been specially conceived with the needs of the user in mind. The ergonomic layout of the extensive range of functions has been chosen to greatly facilitate the work of the driver.

The large, dynamically designed air suction and exhaust vents provide an immediate clue to the performance class of the new S-Line. The new models are equipped with the powerful COM IIIB engine which meets future requirements of the EU vehicle emissions standard. Due to their lower centre of gravity, the new vehicles in the KAISER S-Line boast even greater stability on extreme slopes.

The main innovation of the new S-Line is the revolutionary hydraulic system ELIS by KAISER (Electronic Load Independent System). ELIS is currently unique in the field of walking mobile excavators. Performance and efficiency can greatly be increased through an intelligent automatic control system. Technical details will be revealed at the official presentation of the new excavator generation at bauma Munich.

BAUER Maschinen GmbH

BAUER Maschinen GmbH which has been continually expanding its products range over recent decades will present together with all its subsidiaries the broadest offer in the specialist foundation engineering equipment sector at bauma.

Bauer Dril
Bauer will launch its new Value Line and Premium Line classification of BG drilling rigs. The Value Line is optimized for kelly drilling. The Premium Line, as the name suggests, is a high-end range incorporating multifunction rigs for a wide variety of applications and can be extended from BG 12 to BG 50. It enables all rotary drilling techniques to be implemented, including kelly drilling with and without a casing oscillator, the classic CFA system and CCFA drilling, as well as soil displacement pile drilling. The Premium Line rigs can also be used without any problem to carry out all kinds of ground improvement techniques, such as cutter soil mixing, single or multiple soil mixing, or deep vibration. They can also be fitted with BC trench cutters. This makes the rigs suitable as a platform for all commonly employed specialist foundation engineering techniques, and enables them to adapt to a wide variety of different soil types based on a broad range of tools.

The company will also present the latest version of the BC series trench cutter, the BC 35. Mounted on a BAUER MC 96 cable excavator with a rotation mechanism, it is capable of 58 metres cutting depth without rotation and 48 metres with rotation. Designed to meet specific on-site requirements, the BC 35 trench cutter is the successor to the tried and proven BC 32 model, though featuring a cutter frame extended to 12 metres. On this new model, the steering flaps on the cutter frame are farther apart and larger. This provides better and more precise steering, even in soft soil.

Besides, Bauer Maschinen subsidiary RTG Rammtechnik GmbH is going to present a number of new developments including RT 21 T and RM 20 rigs. New products are once again being presented by KLEMM Bohrtechnik GmbH with its anchor drilling rigs and jet-grouting systems. MAT Mischanlagentechnik GmbH will present its suspension mixers and treatment plants, while PRAKLABohrtechnik GmbH will present a deep drilling rig designated RB-T 90.
NBM&CW March 2013
LogiMAT India 2024 Showcases Logistics Industry Advancements

LogiMAT India 2024 Showcases Logistics Industry Advancements

LogiMAT India 2024 showcased latest advancements in intralogistics, material handling, warehousing technology, automation, and transportation management, fostered strategic collaborations between exhibitors and buyers, and facilitated

Read more ...

World Tunnel Congress 2024 Wraps up Successfully in Shenzhen China

World Tunnel Congress 2024 Wraps up Successfully in Shenzhen China

World Tunnel Congress 2024 Wraps up Successfully in Shenzhen China The 2024 World Tunnel Congress, hosted by the International Tunnelling and Underground Space Association (ITA) and organized by the China Civil Engineering Society, opened in Shenzhen on April 22nd. The WTC is the premier annual

Read more ...

Changsha Intl' Construction Equipment Exhibition (CICEE) Goes Global

Changsha Intl' Construction Equipment Exhibition (CICEE) Goes Global

From the Xiangjiang River to the Seine, the 2025 CICEE goes global with ‘face-to-face’ interactions. Covering Ten Countries, Hundred Cities, Thousand Enterprises, and a Ten Thousand Miles Tour - 2025 CICEE Global Promotion reaches

Read more ...

CII International Conference on Construction Equipment

CII International Conference on Construction Equipment

The first edition of the CII International Conference on Construction Equipment held on April 10th at Gurugram was focused on the theme ‘Sustainable Manufacturing and Resilient Technologies’. Over 250 participants attended the one-day

Read more ...

ConTech 2024 Focus on Sustainability, Durability & Speedy Construction

ConTech 2024 Focus on Sustainability, Durability & Speedy Construction

Indian Concrete Institute, New Delhi and Gurgaon Centres in association with Chalk Talk, jointly organized a two-day seminar, namely “ConTech 2024” in New Delhi from February 23rd to 24th, 2024. The theme of the event was

Read more ...

IRF Conference Highlights Road Construction Technologies & Solutions

IRF Conference Highlights Road Construction Technologies & Solutions

International Road Federation (IRF) organized a two-day Conference-cum-Exhibition titled ‘Revolutionizing Road Infra with Modern Equipment, Technologies, Sustainable Materials, and Policy Guidelines’.

Read more ...

LogiMAT India 2024 facilitates ₹500 mn Investment Surge

LogiMAT India 2024 facilitates ₹500 mn Investment Surge

The LogiMAT 2024 event facilitated significant investments in India's logistics sector, with transactions worth over ₹500 million taking place, contributing towards infrastructure development, technology adoption, and capacity

Read more ...

Apollo Inffratech Group's Technovation: A festival of future technologies

Apollo Inffratech Group's Technovation: A festival of future technologies

Apollo Inffratech Group celebrated TechNOVATION - a festival of future technologies - on 16th February 2024. It was held at two of its production facilities simultaneously viz. at Apollo Inffratech’s Headquarters and Works at

Read more ...

International Symposium on Innovative World of Concrete (IWC24)

International Symposium on Innovative World of Concrete (IWC24)

The International Symposium on Innovative World of Concrete (IWC24) was held at Raajkutir, Kolkata, India, from 18th to 20th January 2024. The symposium focused on the theme "Concrete Construction: Present and Future." Organized

Read more ...

ICEMA Summit: Making CE Manufacturing Future-Ready

ICEMA Summit: Making CE Manufacturing Future-Ready

The 2nd CE Manufacturing and Supply Chain Summit, organized by the Indian Construction Equipment Manufacturers Association (ICEMA) – an affiliated body of CII, in New Delhi, on 19th February 2024, hosted discussions on critical topics

Read more ...

World Tunnel Congress: Preview of Four Highlights at WTC 2024 Exhibition in China

World Tunnel Congress: Preview of Four Highlights at WTC 2024 Exhibition in China

The World Tunnel Congress 2024 is set to be held with great fanfare during 19-25 April ’24 at Shenzhen, China. To date, the Congress has drawn the world's leading companies in the tunnel industry to participate in the event.

Read more ...

CCMA Successfully Hosts the 4th International Suppliers Conference 2023 on 'Construction Chemicals for the Next Gen'

CCMA Successfully Hosts the 4th International Suppliers Conference 2023 on 'Construction Chemicals for the Next Gen'

The Construction Chemical Manufacturers Association (CCMA) has successfully organized the 4th International Suppliers Conference 2023 on "Construction Chemicals for the Next Gen" on the 4th and 5th of December, 2023, at Taj Vivanta, Navi Mumbai

Read more ...

EXCON Bigger & Better in 2023 - Puts the Spotlight on High-Tech Machines Alternate Fuels Electric Equipment Hydrogen Engines

EXCON Bigger & Better in 2023 - Puts the Spotlight on High-Tech Machines Alternate Fuels Electric Equipment Hydrogen Engines

Spread over 32,00,000 sqft of display area, CII Excon 2023 attracted over 75,000 visitors, 1,021 exhibitors, including more than 100 from overseas (as per preliminary figures; final will be revealed post-UFI audit), and participation

Read more ...

Sustainable Construction takes Center Stage at WOC India 2023

Sustainable Construction takes Center Stage at WOC India 2023

The 9th edition of World of Concrete India was organised by Informa Markets in India, a leading B2B event organizer, at the Bombay Exhibition Centre, Mumbai. The three-day event that concluded on October 20, 2023, was marked by the presence

Read more ...

EXCON 2023: A Window to India's Engineering Prowess & Global Competitiveness

EXCON 2023: A Window to India's Engineering Prowess & Global Competitiveness

There is a great deal of anticipation amongst exhibitors and visitors from across India and abroad for the upcoming Excon’23. The trade event, one of the largest in Asia in the infra construction equipment sector, has grown

Read more ...

Global Maritime India Summit 2023 Modernizing Logistics and Coastal Shipping

Global Maritime India Summit 2023 Modernizing Logistics and Coastal Shipping

Prime Minister Narendra Modi, while inaugurating the third edition of Global Maritime India Summit 2023 held in Mumbai, remarked that India has a vast coastline, a strong riverine eco-system, and a rich cultural

Read more ...

India Warehousing & Logistics Show A key platform for knowledge sharing in Warehousing & Logistics Industry

India Warehousing & Logistics Show A key platform for knowledge sharing in Warehousing & Logistics Industry

The 10th-anniversary edition of the India Warehousing & Logistics Show (IWLS) is scheduled to take place for three days at the Bombay Exhibition Centre, Goregaon (E) in Mumbai from November 21st

Read more ...

Excon 2023 - Propelling India’s Technological Prowess & Global Stature

Excon 2023 - Propelling India’s Technological Prowess & Global Stature

Preparations for the upcoming Excon 2023 edition are in full swing, with organizer CII, in collaboration with various departments of the Karnataka state government, planning key activities for the attendees. No doubt, given the impressive stature of the

Read more ...

Terex India Hosts TEXCON 2023

Terex India Hosts TEXCON 2023

Terex India’s TEXCON 2023 event, held at its Hosur facility in Tamil Nadu, showcased an impressive line-up of Technological and Sustainable Solutions for Construction and Recycling Industries. P.P. Basistha reports. Terex, global manufacturer of materials

Read more ...

To get latest updates on whatsapp, Save +91 93545 87773 and send us a 'Saved' message
Click Here to Subscribe to Our eNewsletter.