The launch of several new models by Volvo Trucks’ at its production facility in Bangalore, underlines the company’s expertise in the tipper truck business.

Vovlo
With a booming infrastructure sector, the construction industry in India has seen rapid growth in road construction, irrigation projects, hydel projects, stone quarries, marble quarries, granite quarries and more. To tap the best potential in this vast sea of opportunities, customers need trucks which can deliver the lowest cost per ton, carry more load per trip and offer the highest productivity and uptime. Volvo Trucks accomplish all of these and more by bringing industry leading technology to work for construction business.

Volvo trucks are designed to be robust and durable with reinforced features to enable them to deliver power and strength for continuous action with heavy loads in the most demanding conditions.

The company’s new, more robust Volvo FM 380 8x4 designed for road construction, irrigation and for use in quarry works, has been further improved to meet customer demand. It has an aerodynamic design, offers an efficient and flexible solution, and is user-friendly and safe. It has the largest capacity body in the segment, delivering the highest productivity, with the most powerful and technologically advanced engine, and is the only model in its segment to have an Automated Manual Transmission - Volvo's superior l-Shift technology- delivering higher fuel efficiency, lower maintenance and better driver comfort in the cabin.

Volvo FMX 460 8X4 designed for mining and construction is a very robust, dependable and high capacity tipper for executing large construction projects in tough operating conditions. The superior engine technology and intelligent l-Shift transmission ensures high fuel efficiency and lowest cost per ton. It affords swift, efficient transportation of large loads, without getting bogged down, and has been developed to be safer and easier to drive.

Volvo FM 420 6X4 tractor is built with enhanced features, strengthened chassis and a more powerful driveline configuration, to get difficult jobs done faster. Its large payload capacity can be attributed to the powerful Volvo engine, superior transmission and a weight optimized design.

Vovlo

Says Vinod Aggarwal, MD & CEO, Volvo Eicher Commercial Vehicles, “The big road and infrastructure projects require handling of large quantities of material over long distances in efficient manner. Volvo Trucks is committed to be an integral part of the construction business and provides customers with solutions that will accelerate the progress of their business.”

Adds Dinakar B, Senior VP-Sales, Marketing & Aftermarket, Volvo Trucks India and VE Commercial Vehicles, “With a Volvo, our customers get industry-leading performance, cost-saving fuel efficiency, and precision manoeuvring to keep things moving quickly and safely. We also offer professional onsite support and service planning to ensure maximum truck utilization.”
Production Linked Incentive (PLI) scheme critical for growth of Construction Equipment Manufacturing in India
Indian Construction Equipment Manufacturers Association (ICEMA) organised the first-ever CE Manufacturing Summit on 2nd December at Hotel Le Meridien, New Delhi, with the theme “Towards Making India a Global Manufacturing Hub for CE”. The day-long affair

Read more ...

ISEE Expo concludes with a vision for India to become a global manufacturing hub for the elevator and escalator industry
The International Sourcing Exposition for Elevators & Escalators (ISEE) successfully concluded in Mumbai on December 3rd, 2022. The expo, organized by TAK Expo Pvt Ltd, featured over 150 international and domestic exhibitors showcasing the latest technology in elevators

Read more ...

ICACI unveils Modern Trends in Construction Technology
The two-day conference on ‘Modern Trends in Construction Technology’ hosted by the India Chapter of American Concrete Institute’s (ICACI) was a resounding success. It brought together India’s leading technocrats on a single platform to present, discuss

Read more ...

bauma Munich 2022 Showcases Industry’s Power to Innovate
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material

Read more ...

bauma Munich  2022 Showcases Industry’s Power to Innovate and Show the Way to Zero Emission
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material machines

Read more ...

Annual Session of ICEMA'22
Roads & Highways Minister Nitin Gadkari exhorts equipment manufacturers to focus on cost-effectiveness and adoption of alternate fuels. “There is a huge scope for bringing innovative construction technologies, which will not only increase the pace of road construction

Read more ...

11th Editon of EXCON concludes with high business volume and footfalls despite the rain playing spoiler
You can’t always have picture perfect conditions, especially when the rain chooses to pour relentlessly, unmindful of the fact that you have set the stage in an outdoor area. Yet, the rain could not wash away the enthusiasm at the event, even when it flooded

Read more ...

CICEE 2023 to Promote Globalization and Specialization
The 2023 CICEE agreement signing ceremony was held in Changsha International Convention and Exhibition Center on 18 May 2022. About 300 representatives from world-renowned main parts companies, national business associations, international authoritative industry

Read more ...

Panel Discussions on CVF Off Highway Throw Up New Information & Insights
The 2nd edition of India’s conference on CVF Off Highway held at Eros Hotel, Nehru Place, New Delhi, brought together senior professionals from the construction, mining, earthmoving, tractor, and agriculture equipment industry

Read more ...

Catalyzing Finance for CE Industry
ICEMA organizes 3rd Finance Conclave to tackle financing issues faced by Construction Equipment buyers for taking up infra development projects. ICEMA’s third annual conclave was held on 15th March’22 at Hotel Taj President

Read more ...

Sharp Ply Celebrates 21 Years of Success
Sharp Ply commemorated its completion of 21 years as a leader in the formwork industry with a grand celebration at Sakleshpur, Karnataka in March 2022. Guests and team members from Hyderabad, Chennai, Surat, Raipur, Vijayawada, Delhi

Read more ...

Catalyzing Finance for CE Industry
ICEMA organizes 3rd Finance Conclave to tackle financing issues faced by Construction Equipment buyers for taking up infra development projects. ICEMA's third annual conclave was held on 15th March '22 at Hotel Taj President in Mumbai

Read more ...

CERA Organizes Workshop on CE Rental Management
The Construction Equipment Rental industry is changing fast, and to stay relevant, rental companies will have to reinvent, consolidate, and find new avenues for growth. This was the focus of discussions at CERA’s virtual workshop on

Read more ...

Sandvik receives CSR Leadership Award for Environment Conservation
Sandvik Mining and Rock Technology India was awarded the CSR Leadership Award for its efforts in 'Environment Conservation' at the 10th India CSR Awards in Bengaluru on 10th December 2021. The award was received by Ravi Arora, Marketing and CSR head from

Read more ...

Certificate Handover Ceremony held for First Batch of Tata Hitachi Japan-India Institute of Manufacturing (JIM)
The Japan-India Institute for Manufacturing (JIM) is the outcome of India’s and Japan’s commitment towards the ‘Manufacturing Skill Transfer Promotion Programme’. Through JIM and another project titled ‘Japan Endowed Courses (JEC), 30,000 candidates

Read more ...

6th National Convention on Ferrocement Technology
Ferrocement Society India is promoting the ‘magical’ ferrocement technology for the last 13 years and has since organized 6 national conventions. The 6th Convention was held in Pune during 12-14 November 2021 at Firodiya Auditorium

Read more ...

CICEE: A Window to Global Innovations & Advanced Manufacturing
The first international press conference of 2023 Changsha International Construction Equipment Exhibition (CICEE) took place in Shanghai during the China International Import Expo. Representatives from 64 domestic media and more than 10 international media

Read more ...

Malaysian Tunneller Clean Sweeps Global Tunnelling Awards in 2021
The KVMRT Putrajaya Line project has recently been recognised by three prestigious industry awards, namely: the Major Project of the Year (with a budget of over 500 million Euros) at the ITA Tunnelling Awards 2021, hosted virtually by the International

Read more ...

Innovation and Adoption of Sustainable Technologies for Better Road Construction Conference by Rex Fuels and CSIR-CRRI
Rex Fuels in association with CSIR-CRRI organised a National Conference on Bitumen & Road Sector with the theme ‘New Technologies for Better Roads’ on 25th November 2021 at Taj Palace, New Delhi. The event, which saw over

Read more ...

Elevator Industry’s ‘OOH Campaign’ for its Mechanics who kept the World Moving during the Pandemic
As humanity reeled under the onslaught of Covid-19 and the resultant uncertainty, the world applauded the millions of essential services workers who toiled tirelessly at great risk to their personal health

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.
Click here to subscribe.
×