Goldhofer to present many innovations for construction and heavy-haulage at bauma Germany

Goldhofer Aktiengesellschaft will be present at this year's bauma with a broad portfolio of vehicles and some exciting new products for the construction and heavy-haulage industries. The highlight will be the premiere of a groundbreaking innovation that will make heavy haulage simpler, more efficient, and also more sustainable. The big secret will be revealed by a member of the board - Rainer Auerbacher - at the Goldhofer exhibition booth on April 8, 2019.

Other attractions will include developments in established models and innovative transport systems. These include the »ARCUS« PK, which was presented at IAA Commercial Vehicles 2018, and Goldhofer's intelligent solution for transporting wind turbine blades - the »VENTUM« - in combination with »BLADEX«. In short, the Goldhofer booth will offer exhibition visitors an up-to-date outlook on the future of the heavy haulage industry and a first-hand insight into the company's latest technical developments.

Goldhofer MS2016

Following the revolutionary »MPA« technology (Bauma 2013) and the innovative »ADDRIVE« system (Bauma 2016), Goldhofer will again be presenting a technical innovation that will have a significant impact on the industry. The vehicle concept to be unveiled at the start of the trade show offers users a completely new standard of precision, safety and efficiency, details of which will be revealed at the premiere of the new system at bauma on April 8.

Goldhofer will also be presenting an overview of its extensive portfolio that includes the TU 4 four-axle trailer for transporting construction machines weighing up to 31,8 t; it comes with a new drawbar and improved ramp operation for enhanced safety and ease of working. Another exhibit will be the »ALLROUNDER« with its flexible loading concept, which makes it a high-performance all-rounder for construction site operations. Visitors to the Goldhofer stand will also be able to take a look at the new STZ-PK 8 low-loader semitrailer unveiled at IAA Commercial Vehicles 2018 under the »ARCUS« label. With a unique steering system combining friction steered and forced-steered pendular axles, the vehicle sets a new benchmark in steering performance at each extension length.

The company has further developed and enhanced vehicles that made their debut at bauma in 2013 and 2016. The »MPA« RM low-loader semitrailer developed on the basis of Goldhofer's »MPA« technology, for example, comes with wheel recesses that combine virtually minimized loading height with optimum travel characteristics, and a highly flexible deck for a wide variety of transport operations.

Similarly, the latest generation of the last bauma highlight »ADDRIVE«, offers features that are sure to convince the transport industry on its performance. "In combination with the new generation of the FTV 500 blade transport device, we will give our customers a convincing presentation of the advantages of the »ADDRIVE« 3-in-1 system," says Rainer Auerbacher.

Another new product in the wind power sector is the »VENTUM«, a five-fold extendible flatbed semi-trailer with a maximum length of 72m. In combination with the »BLADEX« blade tip lifting device, this constitutes a complete system that permits higher travel speeds even when transporting extremely long turbine blades, and avoids time-consuming vehicle changes.

Visitors will also find optimized versions of the THP modular heavy-duty trailers and the latest generation of the PST self-propelled modules. "In this segment, too, we are once again in a position to present new innovations and offer our customers added value for their vehicle fleets," says Rainer. Last but not the least, visitors will be able to admire the new »FAKTOR« 5.5 high girder bridge. With its outstanding payload to deadweight ratio, it is the perfect solution for customers looking for a lighter version of the remarkable »FAKTOR« 5.

Lifting & Specialized Transport — January - March 2019

Production Linked Incentive (PLI) scheme critical for growth of Construction Equipment Manufacturing in India
Indian Construction Equipment Manufacturers Association (ICEMA) organised the first-ever CE Manufacturing Summit on 2nd December at Hotel Le Meridien, New Delhi, with the theme “Towards Making India a Global Manufacturing Hub for CE”. The day-long affair

Read more ...

ISEE Expo concludes with a vision for India to become a global manufacturing hub for the elevator and escalator industry
The International Sourcing Exposition for Elevators & Escalators (ISEE) successfully concluded in Mumbai on December 3rd, 2022. The expo, organized by TAK Expo Pvt Ltd, featured over 150 international and domestic exhibitors showcasing the latest technology in elevators

Read more ...

ICACI unveils Modern Trends in Construction Technology
The two-day conference on ‘Modern Trends in Construction Technology’ hosted by the India Chapter of American Concrete Institute’s (ICACI) was a resounding success. It brought together India’s leading technocrats on a single platform to present, discuss

Read more ...

bauma Munich 2022 Showcases Industry’s Power to Innovate
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material

Read more ...

bauma Munich  2022 Showcases Industry’s Power to Innovate and Show the Way to Zero Emission
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material machines

Read more ...

Annual Session of ICEMA'22
Roads & Highways Minister Nitin Gadkari exhorts equipment manufacturers to focus on cost-effectiveness and adoption of alternate fuels. “There is a huge scope for bringing innovative construction technologies, which will not only increase the pace of road construction

Read more ...

11th Editon of EXCON concludes with high business volume and footfalls despite the rain playing spoiler
You can’t always have picture perfect conditions, especially when the rain chooses to pour relentlessly, unmindful of the fact that you have set the stage in an outdoor area. Yet, the rain could not wash away the enthusiasm at the event, even when it flooded

Read more ...

CICEE 2023 to Promote Globalization and Specialization
The 2023 CICEE agreement signing ceremony was held in Changsha International Convention and Exhibition Center on 18 May 2022. About 300 representatives from world-renowned main parts companies, national business associations, international authoritative industry

Read more ...

Panel Discussions on CVF Off Highway Throw Up New Information & Insights
The 2nd edition of India’s conference on CVF Off Highway held at Eros Hotel, Nehru Place, New Delhi, brought together senior professionals from the construction, mining, earthmoving, tractor, and agriculture equipment industry

Read more ...

Catalyzing Finance for CE Industry
ICEMA organizes 3rd Finance Conclave to tackle financing issues faced by Construction Equipment buyers for taking up infra development projects. ICEMA’s third annual conclave was held on 15th March’22 at Hotel Taj President

Read more ...

Sharp Ply Celebrates 21 Years of Success
Sharp Ply commemorated its completion of 21 years as a leader in the formwork industry with a grand celebration at Sakleshpur, Karnataka in March 2022. Guests and team members from Hyderabad, Chennai, Surat, Raipur, Vijayawada, Delhi

Read more ...

Catalyzing Finance for CE Industry
ICEMA organizes 3rd Finance Conclave to tackle financing issues faced by Construction Equipment buyers for taking up infra development projects. ICEMA's third annual conclave was held on 15th March '22 at Hotel Taj President in Mumbai

Read more ...

CERA Organizes Workshop on CE Rental Management
The Construction Equipment Rental industry is changing fast, and to stay relevant, rental companies will have to reinvent, consolidate, and find new avenues for growth. This was the focus of discussions at CERA’s virtual workshop on

Read more ...

Sandvik receives CSR Leadership Award for Environment Conservation
Sandvik Mining and Rock Technology India was awarded the CSR Leadership Award for its efforts in 'Environment Conservation' at the 10th India CSR Awards in Bengaluru on 10th December 2021. The award was received by Ravi Arora, Marketing and CSR head from

Read more ...

Certificate Handover Ceremony held for First Batch of Tata Hitachi Japan-India Institute of Manufacturing (JIM)
The Japan-India Institute for Manufacturing (JIM) is the outcome of India’s and Japan’s commitment towards the ‘Manufacturing Skill Transfer Promotion Programme’. Through JIM and another project titled ‘Japan Endowed Courses (JEC), 30,000 candidates

Read more ...

6th National Convention on Ferrocement Technology
Ferrocement Society India is promoting the ‘magical’ ferrocement technology for the last 13 years and has since organized 6 national conventions. The 6th Convention was held in Pune during 12-14 November 2021 at Firodiya Auditorium

Read more ...

CICEE: A Window to Global Innovations & Advanced Manufacturing
The first international press conference of 2023 Changsha International Construction Equipment Exhibition (CICEE) took place in Shanghai during the China International Import Expo. Representatives from 64 domestic media and more than 10 international media

Read more ...

Malaysian Tunneller Clean Sweeps Global Tunnelling Awards in 2021
The KVMRT Putrajaya Line project has recently been recognised by three prestigious industry awards, namely: the Major Project of the Year (with a budget of over 500 million Euros) at the ITA Tunnelling Awards 2021, hosted virtually by the International

Read more ...

Innovation and Adoption of Sustainable Technologies for Better Road Construction Conference by Rex Fuels and CSIR-CRRI
Rex Fuels in association with CSIR-CRRI organised a National Conference on Bitumen & Road Sector with the theme ‘New Technologies for Better Roads’ on 25th November 2021 at Taj Palace, New Delhi. The event, which saw over

Read more ...

Elevator Industry’s ‘OOH Campaign’ for its Mechanics who kept the World Moving during the Pandemic
As humanity reeled under the onslaught of Covid-19 and the resultant uncertainty, the world applauded the millions of essential services workers who toiled tirelessly at great risk to their personal health

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.
Click here to subscribe.