Comansa CubeThe Bauma visitors will be able to see the benefits of the CUBE cab of COMANSA's cranes.
This year, COMANSA will be exhibiting its latest high capacity model 21LC1050, which has been available worldwide since September 2018. This flat-top crane can load up to 50 tons (110,230 lb), has a maximum radius of 80 metres (262.4 ft), and provides high performance in large industrial and infrastructure projects and in lifting of heavy precast or steel structures, including PPVC, during construction.

The 21LC1050 features high speed hoist mechanisms (up to 300 m per minute/984 ft) and capacity for 1,570 metres of wire rope (5,150 ft.), making it the right choice for high rise construction. With its single-double trolley system with automatic reeving change, the crane always has an optimized load diagram. Working with the simple (or front) trolley, the crane improves its tip loading capacity and reaches higher hoist speeds. With the double trolley (front plus rear), the crane can work with the heaviest loads.

A new modular counterjib was designed for the 21LC1050, which allows up to six different configurations to adapt the crane to different needs and with increased safety. Thus, when the crane is assembled with a maximum jib length (80 metres/262.4 ft), the counterjib radius is 31 metres (101.7 ft), and can reduce to 27 (88.6 ft) when the jib length is 50 metres (164 ft). This will be shown at Bauma.

Comansa Crane 21LC1050The flat-top crane 21LC1050 will be shown in Bauma at COMANSA's booth: FS.1103/1
The 21LC1050 is delivered with the new CUBE cab in its XL size, the largest from COMANSA, ensuring great productivity with its fully glazed front, and greater comfort to the operator. In bauma, an XL CUBE cab will be exhibited at ground level for visitors to see its ergonomic benefits and the spacious distribution. Its design has been awarded two prestigious prizes: iF Design Award 2018 and German Design Award 2019.

The 21LC1050 flat-top is the latest high capacity crane launched by COMANSA, and is yet another step forward in the company's strategy to adapt its range to global construction needs. Ten years ago, COMANSA's catalogue was formed by small and medium size flat-top cranes and three luffers, with maximum load capacity of up to 24 tons (52,900 lb). Since then, COMANSA has developed a new range of luffers, a new series of medium size flat-tops, and its heavy load range, including a 90-ton flat-top (198,410 lb).

Today, COMANSA offers 19 flat-top models and 6 luffing-jib cranes for all types of construction projects and has a leading position in the high capacity range. Besides the new 21LC1050, COMANSA has launched the LCL700 luffing jib crane, with maximum load capacity of up to 64 tons (141,090 lb), and has upgraded the flat-top models 21LC660 and 21LC750 to load up to 50 tons (110,230 lb).

Tower crane manufacturer COMANSA and its German dealer and crane specialist BKL Baukran Logistik will join forces for the third time and share booth FS 1103/1 at bauma 2019. The relationship between the companies dates to 2011, when BKL purchased six COMANSA flat-top cranes with a maximum load capacity of 8 to 18 tons. Soon afterwards, BKL became a COMANSA dealer in Germany. It will now be purchasing the 21LC1050 for its rental fleet.

Lifting & Specialized Transport — January - March 2019

Production Linked Incentive (PLI) scheme critical for growth of Construction Equipment Manufacturing in India
Indian Construction Equipment Manufacturers Association (ICEMA) organised the first-ever CE Manufacturing Summit on 2nd December at Hotel Le Meridien, New Delhi, with the theme “Towards Making India a Global Manufacturing Hub for CE”. The day-long affair

Read more ...

ISEE Expo concludes with a vision for India to become a global manufacturing hub for the elevator and escalator industry
The International Sourcing Exposition for Elevators & Escalators (ISEE) successfully concluded in Mumbai on December 3rd, 2022. The expo, organized by TAK Expo Pvt Ltd, featured over 150 international and domestic exhibitors showcasing the latest technology in elevators

Read more ...

ICACI unveils Modern Trends in Construction Technology
The two-day conference on ‘Modern Trends in Construction Technology’ hosted by the India Chapter of American Concrete Institute’s (ICACI) was a resounding success. It brought together India’s leading technocrats on a single platform to present, discuss

Read more ...

bauma Munich 2022 Showcases Industry’s Power to Innovate
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material

Read more ...

bauma Munich  2022 Showcases Industry’s Power to Innovate and Show the Way to Zero Emission
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material machines

Read more ...

Annual Session of ICEMA'22
Roads & Highways Minister Nitin Gadkari exhorts equipment manufacturers to focus on cost-effectiveness and adoption of alternate fuels. “There is a huge scope for bringing innovative construction technologies, which will not only increase the pace of road construction

Read more ...

11th Editon of EXCON concludes with high business volume and footfalls despite the rain playing spoiler
You can’t always have picture perfect conditions, especially when the rain chooses to pour relentlessly, unmindful of the fact that you have set the stage in an outdoor area. Yet, the rain could not wash away the enthusiasm at the event, even when it flooded

Read more ...

CICEE 2023 to Promote Globalization and Specialization
The 2023 CICEE agreement signing ceremony was held in Changsha International Convention and Exhibition Center on 18 May 2022. About 300 representatives from world-renowned main parts companies, national business associations, international authoritative industry

Read more ...

Panel Discussions on CVF Off Highway Throw Up New Information & Insights
The 2nd edition of India’s conference on CVF Off Highway held at Eros Hotel, Nehru Place, New Delhi, brought together senior professionals from the construction, mining, earthmoving, tractor, and agriculture equipment industry

Read more ...

Catalyzing Finance for CE Industry
ICEMA organizes 3rd Finance Conclave to tackle financing issues faced by Construction Equipment buyers for taking up infra development projects. ICEMA’s third annual conclave was held on 15th March’22 at Hotel Taj President

Read more ...

Sharp Ply Celebrates 21 Years of Success
Sharp Ply commemorated its completion of 21 years as a leader in the formwork industry with a grand celebration at Sakleshpur, Karnataka in March 2022. Guests and team members from Hyderabad, Chennai, Surat, Raipur, Vijayawada, Delhi

Read more ...

Catalyzing Finance for CE Industry
ICEMA organizes 3rd Finance Conclave to tackle financing issues faced by Construction Equipment buyers for taking up infra development projects. ICEMA's third annual conclave was held on 15th March '22 at Hotel Taj President in Mumbai

Read more ...

CERA Organizes Workshop on CE Rental Management
The Construction Equipment Rental industry is changing fast, and to stay relevant, rental companies will have to reinvent, consolidate, and find new avenues for growth. This was the focus of discussions at CERA’s virtual workshop on

Read more ...

Sandvik receives CSR Leadership Award for Environment Conservation
Sandvik Mining and Rock Technology India was awarded the CSR Leadership Award for its efforts in 'Environment Conservation' at the 10th India CSR Awards in Bengaluru on 10th December 2021. The award was received by Ravi Arora, Marketing and CSR head from

Read more ...

Certificate Handover Ceremony held for First Batch of Tata Hitachi Japan-India Institute of Manufacturing (JIM)
The Japan-India Institute for Manufacturing (JIM) is the outcome of India’s and Japan’s commitment towards the ‘Manufacturing Skill Transfer Promotion Programme’. Through JIM and another project titled ‘Japan Endowed Courses (JEC), 30,000 candidates

Read more ...

6th National Convention on Ferrocement Technology
Ferrocement Society India is promoting the ‘magical’ ferrocement technology for the last 13 years and has since organized 6 national conventions. The 6th Convention was held in Pune during 12-14 November 2021 at Firodiya Auditorium

Read more ...

CICEE: A Window to Global Innovations & Advanced Manufacturing
The first international press conference of 2023 Changsha International Construction Equipment Exhibition (CICEE) took place in Shanghai during the China International Import Expo. Representatives from 64 domestic media and more than 10 international media

Read more ...

Malaysian Tunneller Clean Sweeps Global Tunnelling Awards in 2021
The KVMRT Putrajaya Line project has recently been recognised by three prestigious industry awards, namely: the Major Project of the Year (with a budget of over 500 million Euros) at the ITA Tunnelling Awards 2021, hosted virtually by the International

Read more ...

Innovation and Adoption of Sustainable Technologies for Better Road Construction Conference by Rex Fuels and CSIR-CRRI
Rex Fuels in association with CSIR-CRRI organised a National Conference on Bitumen & Road Sector with the theme ‘New Technologies for Better Roads’ on 25th November 2021 at Taj Palace, New Delhi. The event, which saw over

Read more ...

Elevator Industry’s ‘OOH Campaign’ for its Mechanics who kept the World Moving during the Pandemic
As humanity reeled under the onslaught of Covid-19 and the resultant uncertainty, the world applauded the millions of essential services workers who toiled tirelessly at great risk to their personal health

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.
Click here to subscribe.
×