Countdown bauma China 2010

bauma China 2010, the 5thInternational Trade Fair for Construction Machinery, Building Material Machines, Construction Vehicles, and Equipment is being held at the Shanghai New International Expo Centre (SNIEC) in Shanghai from 23-26 November, 2010. A trade fair of international character that offers access to exhibitors to target mainly Chinese and Asian markets. The countdown has already started as there are just few days left to go.

Countdown bauma China 2010

Due to consistent strong demand for exhibition space at the upcoming bauma China, the additional space is being made available at the outdoor exhibition site which will allow organizers to augment meager space. Initially, SNIEC had available space of 220,000 square meters but due to high demand of more space, it went up to 230,000 square meters. The exhibition ground has been divided into two parts the first part is of 100,000 square metres indoor hall space and the second part is of 130,000 square metres for outdoors.

Countdown bauma China 2010

The healthy growth over the past 15 years has allowed China to develop into the third-largest economic power in the world. China remained nearly unaffected by the global financial and economic crisis. Last year, real economic growth was 8.7 percent, and according to International Monetary Fund’s estimates, the figure is expected to reach 9-10 percent during 2010–15. Many Asian markets, led by China, have continued to grow. Similar development has been experienced in the Indian subcontinent. This state of economy resulted into the great demand for additional exhibition space and more participation from the key players of the industry.

Based on the current level of registrations received for bauma China 2010, approximately 1,858 exhibitors from 37 countries will occupy all the available exhibition space. Amongst others, they include well-known companies such as Beijing Shougang Heavy Duty Track Manufactory Co., Ltd., CSR Times Locomative & Rolling Stock Machinery Co., Ltd., Kaeser, Keestrack and Quingdao Ketai Heavy Industry Machinery Co., Ltd., who are participating in bauma China for the first time. A million of thanks to Association of Equipment Manufacturers (AEM) USA, Caterpillar OEM Solutions, and Terex for their close cooperation and their regular participation at bauma China. As a result, all the product-group categories at bauma China will have international key players, which underlines yet again bauma China's character as a leading exhibition in Asia," Exhibition Group Director Collin Davis remarked.

Countdown bauma China 2010

The level of registrations for bauma China 2010 reflects positive economic developments in the construction sector in China and Asia. Market researchers are currently forecasting a new record in the volume of imported mining, building-construction and civil-engineering machines in China between now and the end of 2010, with total volume expected to reach some five billion euros. In addition to new records in the amount of exhibition space and the number of exhibitors, the number of visitors has also gone up from 112,674 in 2008 to over 120,000 expected this gone up.

Few Participating Companies of bauma China 2010


Manitowoc Cranes, an important exhibitor at bauma China will introduce its range of products and among them include a 100 t Crawler crane MLC100, a 55 t and 25 t Truck cranes GT55 and GT25-5 from Dong Yue brand.

Countdown bauma China 2010
The Model MLC100 is a 100 t capacity crawler crane. Maximum boom length is 73 m, and a 24 m fixed jib option is available. The maximum combination length is 58 m of main boom working with 24 m of jib. This gives a maximum tip height of 81.8 m.

The MLC100 features a Tier III compliant Cummins QSL300 engine that produces 224 kW. The crane's pilot-controlled hydraulic system means smooth operation and precise control to increase lifting productivity and facilitate safe operations.

It can be transported in four truck loads when the crane is configured with its 70 m boom plus 24 m fixed jib. Manitowoc Cranes plans to introduce a 150 t crawler crane in the Chinese market by the end of 2010.

Gilles Martin, executive vice president of Manitowoc's Asia-Pacific region, said the company followed its rigorous product development standards in designing this new crane. "Transportability, reliability, ease-of-assembly and operating speed were all factors taken into consideration when developing the MLC100," he said.


Putzmeister will exhibit at show under the motto "Focus - Professional and Expert." Three truck-mounted concrete pumps are set to be exhibited and the M58 will be the flagship. With the innovative TRDV support and its 5-arm boom, the M58 has been designed for maximum flexibility of use. The M58 is accompanied by the M36, Putzmeister’s worldwide best-seller, and the M49, which, in the Chinese market, offers the optimum combination of maximum range with 5-arm RZ folding system, compact space requirements for the support and a modern, economical-to-run controller.

Countdown bauma China 2010
At the show, Putzmeister will demonstrate a complete vertical delivery system with MX 30-3 stationary boom, RS 850 freestanding tubular column and a 2109 HPD trailer concrete pump with S transfer tube. The range of trailer concrete pumps with S transfer tube is supplemented by a smaller, simplified but extremely robust trailer version of the 1004 HD trailer concrete pump with S transfer tube. This is equipped with particularly low-wear parts and is suitable for delivery rates up to 40 m³ and heights of approximately 100 m.

For air-placed concreting in relatively small tunnel cross sections, Putzmeister is presenting for the first time in Asia the new SPM 4207, which, with a boom range of 8.5 m, supplements the very successful SPM 500 in a scaled-down form.

Putzmeister will also exhibit its BSF 2007 City Pump. If there is no space on the Job site for a Truck - mounted Concrete Pump, then BSF 2007 is the perfect solution. It solves the problem of space constraint as due to the small foot print, this machine is suitable to operate in congested cities.

It has a Support area which is barely larger than the Truck Surface Area. So it can park & start concrete pumping at any location. It is a Versatile Champion on the Road.

It is very ideal for narrow Roads & closely spaced buildings in inner cities. Its low height makes driving under Bridges & under passes easy.

This truck mounted concrete pump BSF 2007 is an Ideal solution for RMC and Road contractors. Its latest Z fold Technology makes it superior to any other Machine in its class.


With a focus on fuel efficiency and productivity, Volvo will showcase a comprehensive lines of products including excavators, wheel loaders and articulated haulers, totally numbering 10 machines. Among the new additions to be unveiled at the show are a new 20 tonne Volvo excavator made exclusively for the Chinese market, as well as products new to China from its road machinery range - a new asphalt paver and an upgraded compaction line.

Countdown bauma China 2010
The 20 tonne excavator is China-customized in terms of application and suitability, and is highly fuel efficient and productive. The asphalt paver comes with great productivity and versatility and is equally meeting the demands of Chinese customers.

Visitors to the Volvo stand will also have the chance to experience the power of Volvo at first hand through an excavator simulator which will be on show.

With the great demand for premium Volvo machines in China, the importance of a strong aftermarket offer is increasing alongside it. Customer Support will be in focus through demonstration of how service agreements and other genuine Volvo parts and service offers protect investment and profits for the customer. The Volvo exhibit will also include a Volvo Remarketing offer and Volvo Financial Services. As a part of company's commitment to innovation in design and engineering, Volvo will also display its three futuristic concept models in China for the first time ever.

Volvo Penta

Being part of the Volvo Group and sister to Volvo Trucks and Volvo Construction Equipment, Volvo Penta is the engine supplier of the Volvo group and will be integrated in the Volvo stand. Based on Volvo as a world-leading developer and manufacturer of heavy-duty diesel engines, Volvo Penta utilises the strength and expertise of the Volvo group to offer customer orientated Power Systems to a wide range of applications all over the world.

Volvo Penta produces innovative products committed to the Volvo core values of quality, safety and environmental care. Volvo Penta provides a combination of leading products, direct OEM assistance and comprehensive global aftermarket support. The company focus on complete customer satisfaction in all aspects such as precision in delivery, efficient logistics, parts supply and worldwide service and support.

OEM’s selling their products into the European and North-American markets now have the additional challenge of the upcoming emission legislation Stage 3B and Tier 4i which will be followed by Stage 4 and Tier 4. Volvo Penta is ready both with power systems and advise for the demands of future exhaust emission legislation. At the show the company will present its complete range of engines and after treatment solutions pinpointed at the OEMs installation demands. The comprehensive and compact SCR after treatment system will be displayed on the stand.

Countdown bauma China 2010
The Volvo Penta Power Systems are used in various construction machines where operational costs, reliability and service support are essential. The engines are suitable for all off-road applications, the range comprises diesel engines from 5 to 16 litre, developing between 100 and 565 kW. Volvo Penta is a leading provider of engines for power generation and supply to Powergen OEM's all over the world.

Volvo Penta offers a complete range of 5-16 litre diesel engines for power generation, with output levels ranging from 75 kW to 640 kW. Almost all engines are dual speed, 1500 rpm (50 Hz) and 1800 rpm (60 Hz). At bauma, one will find the most powerful 16-litre engine in the world.


MBK products are being used worldwide in the production of concrete pipes and cover the requirements with regards to reinforcement and processing of concrete pipes adequately. Its product range include Wire-Cage-Machines and Accessories, Cage handling equipment, Pipe handling and processing machinery, Machines for the insurance of the quality and the testing of reinforced concrete pipes.

MBK manufactures machines as per the requirement and demand from the clients. On the order from Franzoni, a well known name in pipe and frame profile market in Italy, MBK commissioned a machine which has met the expectation of the client.

Countdown bauma China 2010
The maximum mat size, required by Franzoni is 6000 x 2500 mm. For this reason MBK developed a cost effective alternative in the form of a wire cage machine, with which hot rolled reinforcement steel can be processed, together with an American producer of frame profiles. In this mat welding plant, the minimum amount of steel is used for both the horizontal and vertical parts. The reinforcement mat has been very popular for many years in civil engineering and there are many suppliers of so called list meshes around the globe. These mats are manufactured with a large number of wire diameters and patterns and hence cover most of the existing needs.

This is primarily valid for the reinforcement of laminar elements, such as floors, walls, bridges, concrete driveways etc., while for example the reinforcement requirements for frame profiles are much different.

Three dimensional products require reinforcement throughout for ceilings and walls, as well as for the floor and walls, in which the horizontal reinforcement must be stronger than that of the walls. Such reinforcement for frame profiles was manufactured in two different ways:
  1. One uses a mat which corresponded to the ceiling and floor requirements. This method requires too much reinforcing steel in the walls.
  2. One uses a mat, which corresponded to the requirements of the wall. This method means that the ceiling and floor reinforcement has to be finished off with steel bars or additional reinforcing mats later on.
Most of the standard off the shelf meshes available from dealers are made from relatively expensive material (cold-drawn wire). Based on both previously used classical methods for reinforcing frame profiles as well as the comparatively high costs of standard meshes, the idea came about to develop a cost effective method, in which a special, unique reinforcement should be used.

Franzoni's new MBK mesh welding plant is capable of producing very cost effective and efficient production of reinforcements for frame profiles. This machine requires only one operator to run it. Stock can be greatly reduced and space saved due to the various options of the new plant, which can react rapidly to different requirements.

Kaushik Engineering Works

Kaushik Engineering Works (KEW), the fast growing company in the road construction equipment manufacturing segment, is bullish on its participation at bauma China. The company's wide range of products includes Asphalt Drum (Hot) Mix Plants-Stationary and mobile, Asphalt Drum (wet) Mix Plants-Stationary and mobile, Macadam plants, Concrete Batching plants (Mobile & stationary), Cement Silos etc have already achieved unmatched worldwide acceptance and now their product range will again be displayed at bauma show with some more new and advanced features and services.

On their participation at bauma China, Mr. Saumil Shah, Director-Business Development said we are very loyal to IMAG-MMI Brand and exhibit at most of the exhibitions that they organize (including bauma– Germany, bauma – China, SITP – Algeria, bC India, etc). As China is a leading supplier of cost effective machineries and people looking for economical equipment and machinery come to China from all over the world to buy them. We, at Kaushik engineering also avail this opportunity of meeting with these buyers by participating and exhibiting at the China's leading construction equipment trade shows and providing our efficient machines at economical prices to them.

Countdown bauma China 2010
Elaborating further he said, many times, it's not possible to meet Indian clients in India but at big platform such as bauma China we get to meet the mainline construction companies as they send their senior executives to attend this type of exhibition of global repute. So it normly happens that Indian sellers meet Indian buyers outside the country and this is what the opportunity we have got to meet in China. Exhibitions such as bauma China provides us good opportunity to get reconnected with our existing clients not just from different parts of the world but also from different parts of India.

He revealed further that we also take this opportunity to look out for newer and innovative technology for construction machineries and also forge strategic tie-ups with foreign manufacturers and suppliers.

PTH Profiteam Holzer PTH Asia

PTH, a family run business has a wide range of product in its portfolio including Stone Crusher, Bitumen Road Crusher, Stabilizer, Grader, Compactor, Speed Grader, and Agricultural Crusher.

Countdown bauma China 2010
PTH provides all kind of stone Crusher for heavy use and in combination with the PTH grader and amazing system for low cost road renewing. PTH products are characterised by a high degree of reliability, patented high-performance tools, replaceable interior wearing parts and highest quality standards for all components! These machines are conceived for applications in the construction and renovation of roads, forest roads, alpine roads, freight traffic roads, gravel roads, sporting venues etc.

Binder+Co AG

Countdown bauma China 2010
Binder+Co is an international specialist in machinery and complete systems for screening, drying and wet-processing bulk materials of all kind. The company is a successful supplier of machinery and plant engineering and focuses the mining, the sand and gravel and the recycling industries. At the show, the company will introduce its Screening technology: circular vibratory screens, linear vibratory screens, resonance vibratory screens, Special screening machine BIVITEC for difficult materials DRYON drying and cooling technology etc.

Herrenknecht Group

Herrenknecht AG is a technology and market leader in the area of mechanized tunnelling systems. As the only company worldwide, Herrenknecht delivers cutting-edge tunnel boring machines for all ground conditions and in all diameters - ranging from 0.10 to 19 meters. The Herrenknecht product range includes tailor-made machines for transport tunnels (Traffic Tunnelling) and supply and disposal tunnels (Utility Tunnelling). Under the umbrella of the Herrenknecht Group, a team of innovative specialists has been formed to provide integrated solutions around tunnel construction with project-specific equipment and service packages upon request: these include separation plants, conveyor belt systems, navigation systems, rolling stock systems and segment moulds right up to turnkey lining segment production plants.

Countdown bauma China 2010
The range of products also includes services in the area of technical consultancy, planning and supervision for tunnelling projects as well as personnel solutions to complement construction site crews on a temporary basis. Herrenknecht develops innovative technical solutions to sink vertical shafts into great depths as well as to successfully excavate sloping shafts. The company also produces state-of-the-art deep drilling rigs that drill down to depths of 6,000 meters as well as plants for the exploration of shallow geothermal energy. Mechanized tunnelling technology from Herrenknecht is opening up new transport, supply and disposal channels for large cities in China.


AME GmbH is developing and producing machines for production of concrete blocks and pavers. Company's stationary lines such as PFS 1000 ECCO line is a semi automatic system with a high output and very competitive price. All AME lines are design in this way that all units are compatible to the next model group. This means if you start with a PFS 1000 or PFS 1300 Ecco Line you can grow the system with basic units and add more automatisation for SMART or FIRST CLASS model. In this way, one can save cost and grow with the demand of the market.

Countdown bauma China 2010
AMETHYST 1500 PREMIUM CLASS is the AME top model with highest output and fully automatic. In this line, our OCTOPUS 450/550 Palleting Robot is integrated. The units are equipped with servo drive motors to guarantee shortest circle time.

FBH 1200 is a automatic mobile block and curbstones production system. Ame is also offering cubing system for the mobile egg layer.

For the production of environmental building materials AME has a unique system for production of wood concrete blocks. The model WSB100 is using wood chips in combination with cement for production.

Gemels SRL

Countdown bauma China 2010
Gemels has been producing a full range of forged steel ball valves for many years. The reason for using this material is the high quality of the final product which can be obtained. Gemels engineers and manufactures its range of ball valves with the maximum consideration for end user needs. The quality of the valve starts with the design. The wide choice of materials in which their valves are available is also a product of theoretical and experimental analysis. The most important features of our ball valves are the Wide range of valves and Fire safe system.

HANSA-FLEX Hydraulic(Shanghai) Co. Ltd

HANSA-FLEX has become Europe's leading company for all areas of hydraulics. It supplies most of hydraulic products and professional service.

Countdown bauma China 2010
The company will exhibit Hydraulic unit hose and hose assembly, Pipe and pipe assembly, all kinds of fitting, all kinds of valve used in line (ball valve, check valve, shuttle valve etc.) Quick connector Flange Pump, Solenoid Valves, cylinders Filters, accumulators etc at the show. Additionally, there will be Hydraulic Accessory (seals, gauge, test points, hose protection, pipe clamps, etc.) Valve-added services (design and manufacture non-standard parts, KANBAN, Professional products training, prototype on site service etc).

Jet Globe Limited

Countdown bauma China 2010
The company is the sole agent for Cal-West Specialty Coatings imported from US. Once applied, these coatings form super-tough protective films that can be easily peeled off by hand without leaving any residue. It can be used to protect the machine during the assembly procedure inside the factory or shipment delivery.

Jet Globe will introduce its CW No.2 Spraywarp which is a sprayable water-based coating that dries to form a tough, protective film. This solvent-resistance coating guards against scuffing, abrasion, paint overspray, and environmental hazards such as acid rain and rail dust. Once dry, Spraywrap peels off easily and completely. The coating is applied with standard spray equipment. It's simple to use and save the labor cost. It helps to build a better corporate image when client receive the products with prefect protection.

Winner Hydraulics Corporation

Countdown bauma China 2010
Established in 1993, Winner designs and manufactures power packs and performance screw-in hydraulic cartridge valves. As per the company official, its in-house R&D department is very experienced and can satisfy almost any requests. It can design and assemble any custom hydraulics circuits.

At the show, the company will display its Cartridge Valves, Solenoid Cartridge Valves, Manifolds, DC / AC Power Packs.

Hydronix Limited

Countdown bauma China 2010
Hydronix is the leading manufacturer of digital microwave moisture sensors and water control equipment. Designed for the harsh environment of the concrete industry, Hydronix have a range of sensors that will suit most installations. For example, they can be mounted in or underneath bins, chutes and in most types of mixer.

The Hydro-Probe II is designed to measure in the flow of material from a bin or chute. The Hydro - Mix VII is a flush mounted sensor for mixers and screw conveyors & the Hydro-Probe Orbiter is a rotating sensor for rotating and static pan mixers. All sensors can be configured and controlled remotely over a network connection Hydro-Probe II Hydro-Mix VII.

YOKE Industrial Corp.

Countdown bauma China 2010
YOKE Industrial Corporation manufactures range of lifting accessories. YOKE runs a constant and strict production facility with quality control in every manufacturing stage from raw materials to the completed product. YOKE's quality meets the ASTM A-952-98 & European committee's standardization regulation EN 1677 for grade 80 steel alloy lifting chain and components.

Its main products that will be displayed at bauma are Grade 80 &100 Lifting Chain Fittings, Snatch Blocks, Hoist Hooks, Angular Contact Bearing Swivels, Hoist Rings & Lifting Points, Shackles, Sockets & Sleeves and Safety Components for Fall Protection.


Countdown bauma China 2010
At SEMW stand in bauma China one can see all piling and deep foundation machinery, Chinese made, Japanese made, and American made under one roof. SEMW in association with US Partner APE INC, and Japanese partner NISSHA would exhibit and share a more than 400 square meter booth in the fair.

Countdown bauma China 2010
SEMW has continuously broken the world records in super big diesel impact hammer manufacturing. During bauma China 2008, two years before, the tremendous 22ton ram weight diesel hammer has shocked the world: there was nothing bigger than D220 compared with other piling machinery in the whole exhibition. It had won the nickname as FATMAN, popular photo background as more and more visitors liked to be photographed with. SEMW has sold SIX FATMAN in China and US, serving the off-shore projects like Wind Farm, Oil Rig and Super Bridge. This year in November the bigger brother D250 will be initiated on SEMW booth and will bring a shocking impact once again.

Countdown bauma China 2010
The world largest project HZMB (Hongkong-Zhuhai-Macau Bridge) would see operation in construction by 2011, for the undersea soil improvement first before piles installment. SEMW jumbo vibro hammer DZ500, electric driven, has granted the order for NINE units to install on the Chinese biggest Contractor- CCCC Group's offshore piling ships for SCP (Sand Compaction Pile) method, leading the way of this project. The close partner APE INC, will also bring in their Chinese made APE-200 exhibiting on the booth, making the ally unique in both electrical and hydraulic driven vibro hammer combination to serve the global contractor.

The other products will be SEMW-NISSHA DH658 Pile Driving Rig with ZLD150 Earth Auger. NISSHA will also bring RT200H Casing Rotary, the best-sale model in Japan and East Asia region, exhibiting on the booth in bauma China.

The International bauma marketing team formed by APE, NISSHA and SEMW will host on E22 Outdoor stand.
ICEMA Organizes Annual Session on CE Industry
The 2023 Annual Session of ICEMA (Indian Construction Equipment Manufacturers Association) focused on Innovation, Investment, Sustainability and Localization as key imperatives for growth and presented perspectives of industry experts. Union Road

Read more ...

CVF Off Highway Forum - Shaping the Future of Indian Off Highway Equipment Markets
The highly anticipated CVF Off Highway Forum set to take place on August 24th, 2023, at Eros Hotel, New Delhi, will provide a platform for industry professionals to exchange ideas, explore collaborations, and drive innovation. This event will bring

Read more ...

First edition of Construction Tradeshow ‘Gujarat CONEX 2023’ to be held from 21st to 23rd September
Gujarat CONEX 2023, an international trade fair for Construction Machinery, Building Materials & Machines, Mining Machines, and Construction Vehicles is being organized by K and D Communication and Messe Muenchen India in collaboration

Read more ...

CSIR - CRRI Organises ‘One Week One Lab’ Campaign Highlights Waste to Wealth Initiatives
CSIR - CRRI (Central Road Research Institute) hosted a week-long celebration across four major cities - Delhi, Hyderabad, Odisha, and Shillong, during 16 July to 22 July, that showcased the technological breakthroughs and innovations of the CSIR

Read more ...

NATCON 2023 - Fostering knowledge exchange, collaboration, and innovation within the construction sector
ACCE(I) - the Association of Consulting Civil Engineers (India) recently organized NATCON 2023 (National Convention of Civil Engineers), a conference titled ‘Building Tall and Resilient’ hosted by the Hyderabad Centre. The event witnessed an overwhelming

Read more ...

Thermax Construction Chemicals hosts गपशप 2023
Thermax Construction Chemicals hosted an innovative forum in the construction space on June 8, 2023, bringing together numerous professionals, industry leaders, and distinguished guests at The Westin in Koregaon Park, Pune. The event served as an

Read more ...

Niftylift’s HR17E wins HAE Product of the Year
The Hire Association Europe (HAE) runs the Hire Awards of Excellence, which took place on 22 April, 2023 at the Grosvenor House in London. The awards celebrate the achievements of hire and supply companies across UK’s plant, tool, equipment, and event

Read more ...

Fintech and Data Analytics to enable Future-Ready Financing Ecosystem for CE & Infrastructure: ICEMA
ICEMA (Indian Construction Equipment Manufacturers Association), an affiliate body of CII, organised the 4th Annual Finance Conclave in New Delhi, based on the theme ‘Bringing a Paradigm Shift in Financial Eco-system: Digitalisation and Beyond

Read more ...

CICEE 2023 - Showcases China’s Manufacturing Strength to the World
As one of the top global events in terms of reputation, influence, and industrial driving force, the third Changsha International Construction Equipment Exhibition (CICEE) kicked off on 12th May 2023 in the Changsha city of Hunan province. It showcased

Read more ...

Technology Days at WIRTGEN GROUP, Pune
The Wirtgen Group hosted over 1200 customers, dealers, and business partners at a mega event dubbed ‘Technology Days’, which was held at their Pune manufacturing facility from 13th to 15th April, 2023. The event was based on the theme: ‘The Future

Read more ...

CONEXPO-CON/AGG - Reveals the Future of Construction
CONEXPO-CON/AGG 2023 emphasizes how the construction industry is evolving and adapting to technologies, products, and sustainable practices. Attendees saw sustainability in action, from electric and hydrogen powered construction equipment

Read more ...

VDMA organizes Emo Hannover Machine Tools Roadshow
VDMA organized a roadshow in Delhi in association with the German Machine Tools Builders Association and Hannover Messe AG to promote the EMO Hannover, Machine Tools Expo, slated to take place between 18-23 September 2023 at Hannover

Read more ...

Spotlight on Sustainable Technologies at bauma CONEXPO India 2023
The sixth edition of bauma CONEXPO India closed on a high note with the launch of 25+ electric and hybrid heavy machines, 10,000+ product displays, insightful conferences and technical sessions, and an exciting line-up of next-generation technologies

Read more ...

World of Concrete - at Las Vegas Returns with Strong Attendance
Concrete professionals kicked off the year with the well-attended 49th annual event that focused on product innovations, environmental impacts, and raised record-breaking auction funds for educational programs. Informa Markets’ World of Concrete, the

Read more ...

2023 CICEE Spring Symposium in Beijing
On January 15, 2023, the Organizing Committee of Changsha International Construction Equipment Exhibition (CICEE) held the 2023 Spring Symposium in Beijing. Representatives and experts from national business associations such as the China Construction

Read more ...

MRAI hosts 10th edition of IMRC
IMRC 2023 puts spotlight on domestic scrap shortage, recycling parks, and solutions for boosting India’s circular economy. Material Recycling Association of India (MRAI hosted the 10th edition of the International Indian Material Recycling Conference from

Read more ...

Production Linked Incentive (PLI) scheme critical for growth of Construction Equipment Manufacturing in India
Indian Construction Equipment Manufacturers Association (ICEMA) organised the first-ever CE Manufacturing Summit on 2nd December at Hotel Le Meridien, New Delhi, with the theme “Towards Making India a Global Manufacturing Hub for CE”. The day-long affair

Read more ...

ISEE Expo concludes with a vision for India to become a global manufacturing hub for the elevator and escalator industry
The International Sourcing Exposition for Elevators & Escalators (ISEE) successfully concluded in Mumbai on December 3rd, 2022. The expo, organized by TAK Expo Pvt Ltd, featured over 150 international and domestic exhibitors showcasing the latest technology in elevators

Read more ...

ICACI unveils Modern Trends in Construction Technology
The two-day conference on ‘Modern Trends in Construction Technology’ hosted by the India Chapter of American Concrete Institute’s (ICACI) was a resounding success. It brought together India’s leading technocrats on a single platform to present, discuss

Read more ...

bauma Munich 2022 Showcases Industry’s Power to Innovate
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material

Read more ...