World of Concrete 2009 An Ideal Marketplace

World of Concrete - 2009 held in February 3 - 6, 2009 at Las Vegas delivered another strong event with 65,287 registering professionals in 880,000 net square feet of exhibit space. The 35th edition of World of Concrete confirms that even in a challenging economy, attendees and exhibitors understand the significance and value of this annual international event for the commercial concrete and masonry industry, reports M.A Faridi who visited World of Concrete 2009.

"World of Concrete continues to be as full and robust as it has been in the past. We have seen an increase in our outdoor exhibits and events and those that attended were amazed at the new products and offerings. Even though the overall numbers may be lower this year, as with most tradeshows in this current economic environment, it is the quality of buyers we bring to the table that continues to make this a strong and important event for the industry," said Tom Cindric, Show Director, World of Concrete.

Exhibitors met and networked with qualified buyers at World of Concrete and took this opportunity to exchange ideas on sustaining business, obtaining the education necessary to be up-to-date on new products and technologies, and learn about new ways to run a smart and lean business during this challenging time for the construction sector.

World of Concrete 2009 An Ideal Marketplace

"We have a lot of new products to launch and this is the best place to do it. World of Concrete has been always a great show for us and this year there is no exception. We have a booth inside and outside. It’s important to be outside because people want to see these things in action," said exhibitor Ed Jaroszewicz, Wacker Neuson, Michigan.

"I think there are opportunities for companies in a down market to get their message out here. There’s a lot of proof that companies that continue marketing during a recession tend to come out stronger when the economy rebounds. The right people are still at World of Concrete. We’ve had more good leads here in two days than we typically generate at other shows in 3–4 days—the people who are here are serious," said exhibitors J. Allan Haggai and Sonda Gerdes, Freightliner Trucks, Fort Mill, South Carolina.

"We were pleasantly surprised by the quality of the prospects who visited the Cemen Tech booths during the World of Concrete. We had set some conservative targets for the show and while our overall leads were down vs. previous years, the quality of the conversations we had at the show was strong. In a tough economic environment, World of Concrete was encouraging as to the potential that exists in the marketplace" said exhibitor Darren Huinker, Director of Sales, Cemen Tech.

World of Concrete has been recognized by Tradeshow Week as one of the Fastest 50 Tradeshows in both 2007 and 2008, and World of Concrete 2009 did not disappoint with special product and action areas including the Producer Center, Material Handling, Concrete Repair and Demolition, World of Masonry, and Technology for Construction.

"I saw World of Concrete as an opportunity to get out here and make contacts with some dealers. Plus, the thing is, you can’t win the game if you’re not playing it. There are a lot of people who are just rolling up in a little ball and seeing what happens in 6-8 months, a couple of years; I refuse to do that. I know there’s still business out there to be if you look hard and in the right places," said attendee John Rieth, Main Street Financial, Florida.

World of Concrete is proud to have been selected to participate in the 2009 International Buyer Program. World of Concrete Management and the U.S. Commercial Service worked closely in the global promotion of the show bringing International buyers and exhibitors together to expand business both domestically and overseas. As part of the program, delegations from all over the globe attended World of Concrete to network with other international visitors as well as connect with US exhibitors interested in exporting goods and services.

"We are seeing the right buyers in our booth—decision makers with purchasing authority. When the economy is uncertain, you have to be selective about what shows you do, and this is the right show for us. Coming and having a presence can help position us for when the economy rebounds," said exhibitor Susanne Nichols, Raydan Manufacturing Inc., Nisku, Alberta, Canada.

World of Concrete 2009 An Ideal Marketplace
"This is a big show for us and there is still important business to be done. We’re launching a new range of products in a couple of stands so we are here to promote that," said exhibitor Robert Burgese, KGS Diamond, England.

"I come to World of Concrete every year because there’s always something new to see. I’m here to look for new products to help me do my job better. I see technology for cutting and drilling and this year’s new products are always better than last year’s—there’s always something new," said exhibitor Steve Cirjak, Best Concrete Cutting, British Columbia.

This year, World of Concrete’s world-class Education Program offered 150+ expert-led seminars, packed with leading-edge advice on how to reduce costs, improve profits and save time, including the latest, most effective strategies for surviving—and thriving—in today’s economy. It featured 17 designated tracks with both 90-minute and 3-hour sessions that provided practical, field-proven instruction in everything from Concrete Fundamentals, Business & Project Management, Masonry, and Concrete Production to Decorative Concrete, Safety & Risk Management, and Finance & Money Matters.

"We come every year and here to take classes and get up-to-date on things. I am here to become a certified finisher. The information that I’m learning I can apply directly to my business. It’s always worthwhile to come to World of Concrete. If you aren’t here, you’re going to be a step behind. This industry changes constantly and you have to stay up to date if you’re going to compete," said attendee Brad Kleman Anderson Contractors Inc., Fort Pierre, South Dakota.

Returning for 2009 was the OSHA 10-hour Construction Safety for Concrete Construction course in English and the all-new Spanish Language OSHA course. These intense 2-day programs provided concrete workers, supervisors and other field personnel with an awareness of safety and health concerns in the construction industry and placed a special emphasis on the OSHA regulations that address concrete issues. These are the only OSHA 10-hour construction program specifically designed to help concrete workers and supervisors identify and avoid hazards they are likely to encounter every day on the job.

The returning GREENSITE area on the show floor showcased the latest green build technologies along with displays, video and live presentations, and limitless information about this exciting new aspect of the construction industry, The Editors of Concrete Construction, The Concrete Producer and Masonry Construction magazines hosted the first annual GREENSITE Luncheon & Forum, sponsored by Holcim. This forum provided contractors, producers and architects a place to share ideas on how to be a part of this growing construction segment – Green Building. Participants learned about techniques and methods from industry professionals who have completed projects in which their innovative approaches to concrete construction techniques, material design, and/or design elements enabled the structure’s owners to earn a green building rating.

Premiering at the 2009 show was the New Product Showcase. Satisfying the #1 reason why attendees come to World of Concrete each year, the New Product Showcase created a targeted area on the show floor where attendees could see some of the newest products to keep their business running strong. With close to 100 participants, this area was a big success packed with attendees throughout the show and will return for World of Concrete 2010.

World of Concrete 2009 An Ideal Marketplace
"The economy is affecting us all, but I am always looking for new products, technologies and ideas to help me be more competitive. The economy will turn around eventually and I need to make sure I’m well positioned for the rebound," said attendee David Santarossa, Santarossa Mosaic & Tile Co., Inc., Indianapolis, Indiana.

"I’m here to get new technology that will help us keep our competitive edge. In this economy, if you’re not moving ahead, you’re falling behind," said attendee J.T. Hughes, Hydro Technologies Inc., Jeffersonville, Indiana.

Unique to World of Concrete has been the Outdoor Events and Demonstration Areas featuring fan favorites including the SPEC MIX BRICKLAYER 500®, the Pettibone Telehandler Skills Competition, the John Deere Load America Competition, and the Mack Driving Skills Safety Challenge and the Liebherr’s Operators’ Precision Challenge. Along with these key spectator events are hundreds of outdoor exhibitors demonstrating many new products and cutting-edge equipment/technologies for a one-of-a-kind experience.

The Concrete Producer magazine also hosted two sold-out Hoover Dam Bypass Editorial Tours sponsored by SIKA. Tour patrons learned the history and challenges of the Hoover Dam Bypass as well as the admixtures used in the project’s mix designs during an informative construction site visit and tour.

The 4th annual Women in Concrete Luncheon & Forum, sponsored by LaFarge, was another successful event, hosted by Concrete Construction and The Concrete Producer Magazines. This luncheon and forum brought together hundreds of women working in the concrete construction industry to network, learn and identify issues important to them.

World of Concrete 2009 An Ideal Marketplace
CIM (Concrete Industry Management) held the 4th annual unreserved live auction at World of Concrete 2009 with all proceeds benefiting the National Steering Committee for CIM to support their efforts to establish, support, and sustain its programs at selected universities. The auction, produced by Ritchie Bros. Auctioneers, raised $300,000.

MCAA (Masonry Contractors Association of America) held its annual convention concurrently with World of Concrete. Kicking off the event at the Opening Session luncheon for MCAA was Alan Thicke, known for his role in the hit Television series "Growing Pains". MCAA also held several educational sessions along with two exciting outdoor events; the International Masonry Skills Challenge and the Fastest Trowel on the Block Competition. MCAA also held Masonry Action Stations for the first time at World of Concrete providing a "how to" approach to educating attendees on various techniques specific to the Masonry industry.

With such a wide variety of events, demonstrations, educational sessions, networking opportunities and much more, World of Concrete will continue to create an important and vital marketplace for both attendees and exhibitors even during challenging economic conditions. World of Concrete 2010 will be held February 2 - 5; Seminars 1 - 5, back again in Las Vegas, at the Las Vegas Convention Center.
ICEMA Organizes Annual Session on CE Industry
The 2023 Annual Session of ICEMA (Indian Construction Equipment Manufacturers Association) focused on Innovation, Investment, Sustainability and Localization as key imperatives for growth and presented perspectives of industry experts. Union Road

Read more ...

CVF Off Highway Forum - Shaping the Future of Indian Off Highway Equipment Markets
The highly anticipated CVF Off Highway Forum set to take place on August 24th, 2023, at Eros Hotel, New Delhi, will provide a platform for industry professionals to exchange ideas, explore collaborations, and drive innovation. This event will bring

Read more ...

First edition of Construction Tradeshow ‘Gujarat CONEX 2023’ to be held from 21st to 23rd September
Gujarat CONEX 2023, an international trade fair for Construction Machinery, Building Materials & Machines, Mining Machines, and Construction Vehicles is being organized by K and D Communication and Messe Muenchen India in collaboration

Read more ...

CSIR - CRRI Organises ‘One Week One Lab’ Campaign Highlights Waste to Wealth Initiatives
CSIR - CRRI (Central Road Research Institute) hosted a week-long celebration across four major cities - Delhi, Hyderabad, Odisha, and Shillong, during 16 July to 22 July, that showcased the technological breakthroughs and innovations of the CSIR

Read more ...

NATCON 2023 - Fostering knowledge exchange, collaboration, and innovation within the construction sector
ACCE(I) - the Association of Consulting Civil Engineers (India) recently organized NATCON 2023 (National Convention of Civil Engineers), a conference titled ‘Building Tall and Resilient’ hosted by the Hyderabad Centre. The event witnessed an overwhelming

Read more ...

Thermax Construction Chemicals hosts गपशप 2023
Thermax Construction Chemicals hosted an innovative forum in the construction space on June 8, 2023, bringing together numerous professionals, industry leaders, and distinguished guests at The Westin in Koregaon Park, Pune. The event served as an

Read more ...

Niftylift’s HR17E wins HAE Product of the Year
The Hire Association Europe (HAE) runs the Hire Awards of Excellence, which took place on 22 April, 2023 at the Grosvenor House in London. The awards celebrate the achievements of hire and supply companies across UK’s plant, tool, equipment, and event

Read more ...

Fintech and Data Analytics to enable Future-Ready Financing Ecosystem for CE & Infrastructure: ICEMA
ICEMA (Indian Construction Equipment Manufacturers Association), an affiliate body of CII, organised the 4th Annual Finance Conclave in New Delhi, based on the theme ‘Bringing a Paradigm Shift in Financial Eco-system: Digitalisation and Beyond

Read more ...

CICEE 2023 - Showcases China’s Manufacturing Strength to the World
As one of the top global events in terms of reputation, influence, and industrial driving force, the third Changsha International Construction Equipment Exhibition (CICEE) kicked off on 12th May 2023 in the Changsha city of Hunan province. It showcased

Read more ...

Technology Days at WIRTGEN GROUP, Pune
The Wirtgen Group hosted over 1200 customers, dealers, and business partners at a mega event dubbed ‘Technology Days’, which was held at their Pune manufacturing facility from 13th to 15th April, 2023. The event was based on the theme: ‘The Future

Read more ...

CONEXPO-CON/AGG - Reveals the Future of Construction
CONEXPO-CON/AGG 2023 emphasizes how the construction industry is evolving and adapting to technologies, products, and sustainable practices. Attendees saw sustainability in action, from electric and hydrogen powered construction equipment

Read more ...

VDMA organizes Emo Hannover Machine Tools Roadshow
VDMA organized a roadshow in Delhi in association with the German Machine Tools Builders Association and Hannover Messe AG to promote the EMO Hannover, Machine Tools Expo, slated to take place between 18-23 September 2023 at Hannover

Read more ...

Spotlight on Sustainable Technologies at bauma CONEXPO India 2023
The sixth edition of bauma CONEXPO India closed on a high note with the launch of 25+ electric and hybrid heavy machines, 10,000+ product displays, insightful conferences and technical sessions, and an exciting line-up of next-generation technologies

Read more ...

World of Concrete - at Las Vegas Returns with Strong Attendance
Concrete professionals kicked off the year with the well-attended 49th annual event that focused on product innovations, environmental impacts, and raised record-breaking auction funds for educational programs. Informa Markets’ World of Concrete, the

Read more ...

2023 CICEE Spring Symposium in Beijing
On January 15, 2023, the Organizing Committee of Changsha International Construction Equipment Exhibition (CICEE) held the 2023 Spring Symposium in Beijing. Representatives and experts from national business associations such as the China Construction

Read more ...

MRAI hosts 10th edition of IMRC
IMRC 2023 puts spotlight on domestic scrap shortage, recycling parks, and solutions for boosting India’s circular economy. Material Recycling Association of India (MRAI hosted the 10th edition of the International Indian Material Recycling Conference from

Read more ...

Production Linked Incentive (PLI) scheme critical for growth of Construction Equipment Manufacturing in India
Indian Construction Equipment Manufacturers Association (ICEMA) organised the first-ever CE Manufacturing Summit on 2nd December at Hotel Le Meridien, New Delhi, with the theme “Towards Making India a Global Manufacturing Hub for CE”. The day-long affair

Read more ...

ISEE Expo concludes with a vision for India to become a global manufacturing hub for the elevator and escalator industry
The International Sourcing Exposition for Elevators & Escalators (ISEE) successfully concluded in Mumbai on December 3rd, 2022. The expo, organized by TAK Expo Pvt Ltd, featured over 150 international and domestic exhibitors showcasing the latest technology in elevators

Read more ...

ICACI unveils Modern Trends in Construction Technology
The two-day conference on ‘Modern Trends in Construction Technology’ hosted by the India Chapter of American Concrete Institute’s (ICACI) was a resounding success. It brought together India’s leading technocrats on a single platform to present, discuss

Read more ...

bauma Munich 2022 Showcases Industry’s Power to Innovate
With around 3,200 exhibitors from 60 countries, and over 495,000 visitors from ~200 countries, bauma Munich 2022 exceeds Industry expectations. Bauma Munich - the world’s leading trade fair for construction machinery, building material

Read more ...