NHSRCL Launches 130m Steel Bridge for Bullet Train Project
This 3000 MT of steel bridge of 18m in height and 14.9m in width has been fabricated at the workshop in Wardha, Maharashtra and was transported on trailers to the site for installation. It requires tremendous efforts to pull such a heavy girder which is likely to be the longest over any national highway in the country.
The bridge fabrication utilized approximately 124,246 Nos. of Tor-Shear Type High Strength (TTHS) bolts with C5 system painting and metallic spherical bearings, all designed for a 100-year lifespan. The steel bridge was assembled at the site at a height of 15m from the ground on temporary trestles and was pulled with automatic mechanism of 2 number of semi-automatic jacks, each of capacity of 250 ton using mac-alloy bars.
The project is being executed meticulously, maintaining the utmost standards of safety and engineering excellence. Leveraging Japanese expertise, India is increasingly utilizing its own technical and material resources to build infrastructure under the "Make in India" initiative. The steel bridge for the Bullet Train Project is a major example of this effort.
This is the third out of the 28 steel bridges completed for the corridor. The first and second steel bridge was launched across National Highway 53, in Surat and over Vadodara-Ahmedabad main line of Indian Railways, near Nadiad in Gujarat respectively.
Steel bridges are most suitable to cross Highways, Expressways and Railways lines, unlike pre-stressed concrete bridges, spanning 40 to 45 meters, which are suitable for most sections, including river bridges. India has the expertise of fabricating steel bridges for heavy haul and semi high-speed trains which run between 100 and 160 kmph. Now, the same expertise in fabrication of steel girders is implemented on Bullet Train corridor too which will have a staggering operational speed of 320 kmph.