Poclain Hydraulics to Display Hydrostatic Transmissions at Excon
Mr. Rajkumar Rao, Regional Sales Manager, Poclain Hydraulics Pvt Ltd
With headquarters in France and 10 factories worldwide, Poclain manufactures high torque low speed hydraulic motors from 172 cc/rev (18 KW) to 30000 cc/rev (500 KW). As informed by Mr. Rajkumar Rao, Regional Sales Manager, Poclain Hydraulics Pvt Ltd, “Our Pondicherry factory currently manufactures motors from 172 cc/rev to 820 cc/rev (29 KW) and it is gearing up further to manufacture motors from the current 70,000 units per year to 1,20,000 units by 2017. A new assembly line is being built now where we have planned to manufacture motors from MS02 frame size (172 cc/rev) to MS18 (2099 cc/rev, 70 KW). The motors are with options like male spline shaft, wheel flanged, pinion shafts etc. and can work at 450 bar pressure. They can have a 2 speed option too.”
At Excon 2015, Poclain will display the following hydraulic motor frame sizes in:
- MS02 – 200 cc/rev with brake
- ML06 – 630 cc/rev with integrated oil exchange
- MG02 – with pivot for 90 deg steering angle
- MK05 – 670 cc/rev, compact ultra slim motor
- MZE02 – pinion shaft motor for slew drive with brake
Apart from these, Poclain is also displaying a product for On-Road applications called CleanStart. The CleanStart system is a stop and start function which comprises a hydraulic motor, pump, valve, tank, and an accumulator. The CleanStart system gives a fuel savings of around 8 to 10% and reduces the emissions. The applications are for the buses and other construction equipment.
Last but not the least; Poclain will also presents its various hydraulic pumps, valves, and electronics products both for off-road and on-road applications.