Fairtop Fast Floor
FAIRTOP FAST FLOOR can be used to prepare a wide variety of sub-floors for, resilient & in flooring, wood flooring and many types of surface coatings. It may also be left exposed as a final finish in light industrial or commercial environments.
FAIRTOP FAST FLOOR provides rapid, economical casting, repair and leveling in exterior exposures and in wet environments. It readily accepts a variety of finishes, or may be left exposed to traffic and weather.
Uses
- Leveling uneven concrete
- Resurfacing frozen, rained-on or scaled concrete
- Correcting camber problems
- Topping and leveling pre-cast planks or tees
- Smoothing rough concrete
Features
Bonding: Polymer modified formula develops high compressive strength as well as good abrasion resistance on properly prepared sub-flooring.Ease of Application: Requires no special skills, tools or additives. FAIRTOP FAST FLOOR simply mixed with water using a drill or other mechanical mixer, poured, spread and left to harden. May be installed in any thickness in one lift.
Compatibility: May be used over concrete, wood, steel or polystyrene foam. Readily accepts many types of coatings, adhesives and mastics typically used in setting tile and installing carpeting or other types of flooring.
Non-Dusting and Water Resistant: Does not tend to "dust" through carpeting or crumble upon contact with moisture.
High Strength: Cement-based composition builds strength up to 5800 psi, matching high quality concrete.
Safety: Contains no toxic resins, solvents or diluents. Odorless, non-flammable, non-corrosive.