With nine machines, Wirtgen has a complete product portfolio covering all standard applications and special cases in concrete paving. The paving widths range from 1m to 16m. Wirtgen GmbH’s motive for introducing this smallest slipform paver model was to open up a new market segment in the class below the well-proven SP 250 The SP 150 focuses on both newcomers to this segment and concrete firms who are interested in acquiring a small machine purely for monolithic offset applications and parapets. For this reason, the SP 150 is characterized by a top price-performance ratio. The design of the SP 150 is based on the proven technology of the SP 250.
The SP 150 is capable of paving offset on the left or the right side of the machine either inside or outside of the machine dimensions. The slipform paver has a maximum working width of 1.50m and a maximum paving thickness of 90cm. It is equipped with a 60 kW engine.
The layout of the SP 150 has been specially optimized for transport. The transport dimensions and weights of the SP 150 adhere to the limits not requiring a special permit. The machine weighs approx. 7,500 kg when equipped with the basic options, and approx. 8,800 kg when equipped with the full range of options.
Owing to its high maneuverability variable working directions pose no problem at all to this compact machine.
The SP 150 has been given a flexible design in order to meet the various paving requirements on different job sites.
The SP 150 is capable of paving offset on the left or the right side of the machine either inside or outside of the machine dimensions. The slipform paver has a maximum working width of 1.50m and a maximum paving thickness of 90cm. It is equipped with a 60 kW engine.
The layout of the SP 150 has been specially optimized for transport. The transport dimensions and weights of the SP 150 adhere to the limits not requiring a special permit. The machine weighs approx. 7,500 kg when equipped with the basic options, and approx. 8,800 kg when equipped with the full range of options.
Owing to its high maneuverability variable working directions pose no problem at all to this compact machine.
The SP 150 has been given a flexible design in order to meet the various paving requirements on different job sites.
Advantages of the SP 150 at a Glance:
- High flexibility: three crawlers with and without parallelogram
- Offset mould can be mounted on either side of the machine, inside or outside the chassis
- Variety of equipment versions: e.g., concrete conveyor belt or auger, hydraulic or electric vibrators, trimmers
- Compact machine size with a transport width of just 2.40m
