Interarch in 2014 designed, manufactured and delivered a fabrication shop and assembly shop for JCB India Limited in Jaipur.The buildings are spread over the area of 30400 Sq. Mtr and 22800 Sq. Mtr respectively.
The project is designed according to the latest IS design codes, IS 800: working stress design for both the buildings with consideration given to all the geographical data like wind velocity, seismic zone as per IS standard for every particular site.
The design of the building was such that temperature was kept in control for monitoring the thermal expansion and contraction.
The expertise of Interarch design & engineering department reduced the engineering time of the fabrication shop and assembly shop which were very complex due to functional requirement of the manufacturing and exceptional high loading required in the building. Interarch for the first time designed a building bearing heavy load of approximately 225 M hanging from the roof and for the column grid of 40 M x 24 M. To take care of the high loads higher grade of steel 450 MPA has been used for the built up members.
Interarch certified builders and employees had to work under very stringent quality and safety conditions and had to deploy innovative solutions like highest safety standard which were followed in line with the international standard to achieve zero accident, logistic and warehousing control at site to meet site standard norms.
This section of the article is only available for our subscribers. Please click here to subscribe to a subscription plan to view this part of the article.