Enerpac Heavy Lifting Technology has successfully completed side-load stability testing of the SCJ-100 (Self-Locking Cube Jack) while performing a 4-point lift with a 400 metric ton load up to 3m at its factory in Hengelo (Netherlands). The SCJ-100 raises the bar for cube jack lifting from 2m to 3m and doubles the lifting capacity compared to the smaller SCJ-50 Cube Jack.

The SCJ-100 Cube Jack is a compact and portable hydraulic solution for synchronised incremental lifting and lowering of heavy loads. It uses a base lifting frame and self-aligning, lightweight steel cribbing blocks to provide high-capacity and stable lifting. Steel cribbing blocks have several benefits over wood cribbing, including fewer cribbing components to handle and align, 8 times faster lifting, and higher lifting compared to the traditional cribbing methods.

During sideload testing, four SCJ-100 Cube Jacks were used to lift a 400 metric ton test load. At 2m high, the load was subjected to a side load of 10 metric tons (2.5%) by attaching a cylinder to the load and pushing the load to the full stroke of the cylinder. At 3m (the maximum lift height for SCJ-100), the load was subjected to a side load of 6 metric tons (1.5 %).

“Even during the toughest sideload test the performance of the SCJ-100 was impressive and with enhanced safety,” said Pete Crisci, Product Line Director at Enerpac Heavy Lifting Technology. “By raising the lifting capacity and maximum lift height, we now offer users a way of tackling heavy lifts that would have been impossible before without excessive and time consuming use of climbing jacks with wooden cribbing.”

Enerpac Raises the Bar with 400T Self-Locking Cube Jack Lift

Enerpac 100-ton Cube Jack for Synchronised Lifting
Up to eighteen 24.5 kg steel cribbing blocks can be safely and easily stacked onto the SCJ-100 Cube Jack base frame yielding a maximum height of 3006 mm. The base frame footprint measures just 655mm x 636mm, making it ideal for restricted operating spaces. A low 558 mm minimum initial jacking height increases flexibility and reduces operational start-up time.

Cube Jacks operate with up to 700 bar (10,000 psi) hydraulic pressure and are compatible with standard pumps, such as the Enerpac Split-Flow Pump that offers the ability to evenly operate multiple Cube Jacks.

The SCJ-100 Cube Jack comes with a storage frame to make tool maintenance and inventory management easier.

Enerpac is a global market leader in high pressure hydraulic tools, controlled force products, portable machining, on-site services and solutions for precise positioning of heavy loads. As a leading innovator with a 110-year legacy, Enerpac has helped move and maintain some of the largest structures on earth. When safety and precision matters, elite professionals in industries such as aerospace, infrastructure, manufacturing, mining, oil & gas and power generation rely on Enerpac for quality tools, services and solutions.
Tower Cranes: Witnessing a Broad Spectrum of Applications
Tower crane manufacturers are widening their product lines and reworking their business strategies in view of the anticipated demand for higher capacity cranes for use in the construction of mega projects. P.P. Basistha reports. There is rising demand of

Read more ...

Industrial Lifting: Enerpac Takes The Load
Compact and easy to transport hydraulic heavy lifting systems developed by Enerpac are proving to be an essential component in tacking complex heavy lifting projects. Industrial heavy lifting projects are becoming more complex. Larger loads in often

Read more ...

Goldhofer: Setting new Benchmarks in Innovation at Upcoming CONEXPO-CON/AGG
At CONEXPO-CON/AGG Goldhofer will be presenting no fewer than four highlights for the American market at its outdoor stand D2239. A STZ-VL4 (3+1) lowboy trailer with flip axle and deck inserts, the »P12 PLUS« highway trailer recently introduced specifically

Read more ...

Mammoet’s New Technology for Real-time Carbon Monitoring
Mammoet has developed a new technology platform that reports emissions data from heavy lifting equipment in real time. The system allows customers to accurately predict and monitor carbon output arising from large heavy lifting and transport projects

Read more ...

A1A Software to Demonstrate new Lift Planning and Business Management Products at 2023 ConExpo-Con/Agg
A1A Software LLC will release a variety of stand-alone lift planning tools in the A1A Product Suite and also introduce a new version of iCraneTrax during ConExpo-Con/Agg, March 14-18, 2023 in Las Vegas. The lift planning and asset management tools

Read more ...

Key Handover Ceremony of First Franna Crane in Delhi by Alpha Services
Alpha Services, the authorized sales and service dealer for Terex Franna cranes in NCR, handed over the first Franna FR17 crane in Delhi to a leading crane hiring company, Shree Ganpati Cranes, Ghevra, Delhi. Owner Krishan Kumar expressed

Read more ...

Vita Industrial’s load stabilization technology to increase efficiency and profitability of crane companies
Vita Industrial’s Load Navigator uses a powerful system of sensors and air thrusters to automatically stabilize loads. The Navigator will be matched head-to-head against taglines, showing how load stabilization can increase

Read more ...

Manitowoc’s total lifting solutions aimed at serving the infrastructure, alternative energy, and industrial end markets
At bauma Munich 2022, Manitowoc showcased a dozen cranes from Grove and Potain, and highlighted its expanded range of support solutions that cover monitoring, parts, service, rental, remanufacturing, finance, and more. The new technologies

Read more ...

Forklift Market: Long Term Growth Trajectory Remains Positive
Maya Xiao, Senior Analyst, Interact Analysis, gives insights on how the Forklift Market is responding to the current geopolitical and economic climate. Forklift shipment growth had plateaued to some extent

Read more ...

Liebherr Showcases First Flat-Top Crane & Luffing Jib Crane with Fibre Rope Technology
The largest addition to the ‘Tough Guys’ series: Liebherr is expanding its EC-B series upwards with the 520 EC-B 20 Fibre. The new flat-top crane with fibre rope and a lifting capacity of up to 20 tons was introduced at bauma Munich

Read more ...

Manitowoc’s total lifting solutions aimed at serving the infrastructure, alternative energy, and industrial end markets
At bauma Munich 2022, Manitowoc showcased a dozen cranes from Grove and Potain, and highlighted its expanded range of support solutions that cover monitoring, parts, service, rental, remanufacturing, finance, and

Read more ...

Comansa presents New LCH300 hydraulic luffing jib crane and Crane Mates– a novel digital solution for fleet management
Spanish tower crane manufacturer Comansa presented its innovative model at Bauma Munich 2022 and its expanded range of luffing jib cranes with the launch of the LCH300, its first hydraulic model, with a maximum load capacity of 16

Read more ...

Zoomlion R-generation Tower Cranes and Green Forklift debut
R220-10S, R90-5RE and other tower cranes tailored by Zoomlion for the European market made a debut and led a new trend at bauma Munich. The R220-10S is a flat-head tower crane based on the future-oriented digital, green, and

Read more ...

TADANO New Crane Models, Technologies, and Solutions
The Tadano Group has expanded its product line, enhanced the Tadano Customer Experience, contributed to community development, and advanced its business activities to protect the global environment. Using the OneTadano concept, the

Read more ...

Enerpac introduces new hydraulic gantry system SBL600
The SBL600 gantry is the latest addition to the SBL-Super Boom Lift hydraulic gantry range. With maximum lifting height of 10.6m, the three-stage telescopic hydraulic cylinder features a foldable boom allowing transportation on standard

Read more ...

Sennebogen machinery is reliable with the latest safety and environmental standards
Displayed at bauma 2022, was the first battery-powered telescopic crawler crane – the 653 E Electro Battery. The new 50-ton battery-powered crane combines the benefits of battery technology with the proven advantages of the

Read more ...

PALFINGER’s Pioneering Solutions
PALFINGER, a leading producer and provider of innovative crane and lifting solutions, demonstrated its comprehensive digitalization competence at bauma Munich. The focus was on three key core topics: Smart Solutions, Smart Services

Read more ...

Fassi Presents 3 Electric Solutions
Fassi’s three solid and operational electric solutions presented at bauma Munich were the SHT and Plug-In systems, and the 'full-electric' truck-crane combination produced in collaboration with Volvo Trucks. Also, Fassi

Read more ...

Bridging the Gap
The importance of understanding work equipment selected for the task in hand. Training providers can only support workers if they understand the risks involved. It’s been more than 30 years of working in the world of safety and I have seen a massive

Read more ...

Geopolitical Climate Creates Perfect Storm for Forklift Manufacturers
Maya Xiao, Senior Analyst, Interact Analysis, gives insights on how and why the current international problems have strained the market. As with almost every industry, supply chain constraints due to Covid-19, coupled with the current geopolitical climate, have created a perfect storm for forklift manufacturers. Our new research has downgraded

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.
Click here to subscribe.
×