Contract Awards →

NBM&CW • TENDER PORTAL

Find your next opportunity.

Explore construction, infrastructure and industry tenders. Search by keyword, sector, location or closing date.

56,637Matching tenders

Tender results

Search results for your selected filters

Clear filters
OpenTender #P2266089

Complete Probing Solution Compatible With The Existing Cnc Machine Setup.Complete Probing Solution Compatible With The Existing Cnc Machine Setup.,Supply, Installation, Integration, And Functional Testing Of A Complete Probing Solution Compat Ible With The Existing Cnc Machine Setup. The Scope Includes: (1) Probe Kit (Including Probe, Transmitter Wi Th Batteries). (2) Receiver Unit. (3) Connecting Cables And Essential Accessories. (4) All Required Probing Sof Tware/Programming Cycles. (5) Modifications To Existing Nc/Plc Programs To Accommodate The Probing Sys Tem If Required. (6) Functional Testing And Training. Technical Specifications:- (1) Transmission Technology = 2.4 Ghz Wireless With Interference-Resistant Spread Spectrum Technology (Fhss Or Dsss). (2) Communic Ation Range (Probe To Receiver) = Minimum 15 Meters. (3) Applications Supported = Part Detection (Includi Ng Axle Length), Centering And Alignment Detection Etc. (4) Input Signal Range = 13.5V To 30V Dc. (5) Outp Ut Signal Specification = 4V To 30V Dc, 40 Ma. (6) Repeatability = Not More Than 1.0 Micro Meters (2S); Be Tter Repeatability Preferred. (7) Trigger/Measurement Force (Xy Plane) = Not More Than 0.75 To 2.0 N. (8) M Inimum Distance Between Units = Minimum 0.5 Meter Between Adjacent Transmitters/Receivers. (9) Stylus Overtravel Limits Xy Plane: Minimum + Or - 12 Degree ; Z-Axis: Minimum 4 Mm. (10) Activation Method = M -Code Controlled And Programmable By Other Standard Methods. (11) Environmental Protection (Ip Rating) = Minimum Ipx8 For Both Probe And Receiver Shall Be Supported With Manufacturers Or From Nabl/Ilac Or Equivalent Accredited Lab. (12) Software Interface / Configuration = Integrated Software Cycles Or Digital Rec Eiver Setup With Display And Remote Controller. (13) Status Indications = Visual Or Digital Display Of: Error Si Gnals, Probe Pulse, Battery Status, Signal Strength Etc. General Requirements:- (1) The System Should Be C Ompatible With Major Cnc Controllers And Open For Integration. (2) Setup, Calibration, And Testing Must Be D One At The Site By The Supplier. (3) All Associated Documentation (User Manuals, Circuit Diagrams, Paramete R Lists) Must Be Provided. (4) Training To The Cnc Operators And Maintenance Personnel Is To Be Included. ( 5) Manufacturers Test Certificate (Mtc) For The Product Shall Be Submitted Along With The Supply. In Additio N, The Manufacturer Shall Submit An Ipx8 Test Report / Certificate Of Confirmation Specifically Confirming Co Mpliance Of The Supplied Product With The Ipx8 Rating. (6) Oem Or Oem Authorized Dealers Only Shall Quote & Shall Submit Oem Authorization Letter/Authorized Dealer Ship Certificate (In Case Of Dealer)/ Oem Declarati On Along With The Offer. (7) Data Sheet Of The Product Quoted Shall Be Submitted Along With The Offer. [ War Ranty Period: 12 Months After The Date Of Delivery ] ] Sse Elecl. Axle Control, Karnataka 1.00 Set

General Karnataka
Tender ValueNot disclosed
Closing Date18 Nov 2026
View Details →