Complete Probing Solution Compatible With The Existing Cnc Machine Setup.Complete Probing Solution Compatible With The Existing Cnc Machine Setup.,Supply, Installation, Integration, And Functional Testing Of A Complete Probing Solution Compat Ible With The Existing Cnc Machine Setup. The Scope Includes: (1) Probe Kit (Including Probe, Transmitter Wi Th Batteries). (2) Receiver Unit. (3) Connecting Cables And Essential Accessories. (4) All Required Probing Sof Tware/Programming Cycles. (5) Modifications To Existing Nc/Plc Programs To Accommodate The Probing Sys Tem If Required. (6) Functional Testing And Training. Technical Specifications:- (1) Transmission Technology = 2.4 Ghz Wireless With Interference-Resistant Spread Spectrum Technology (Fhss Or Dsss). (2) Communic Ation Range (Probe To Receiver) = Minimum 15 Meters. (3) Applications Supported = Part Detection (Includi Ng Axle Length), Centering And Alignment Detection Etc. (4) Input Signal Range = 13.5V To 30V Dc. (5) Outp Ut Signal Specification = 4V To 30V Dc, 40 Ma. (6) Repeatability = Not More Than 1.0 Micro Meters (2S); Be Tter Repeatability Preferred. (7) Trigger/Measurement Force (Xy Plane) = Not More Than 0.75 To 2.0 N. (8) M Inimum Distance Between Units = Minimum 0.5 Meter Between Adjacent Transmitters/Receivers. (9) Stylus Overtravel Limits Xy Plane: Minimum + Or - 12 Degree ; Z-Axis: Minimum 4 Mm. (10) Activation Method = M -Code Controlled And Programmable By Other Standard Methods. (11) Environmental Protection (Ip Rating) = Minimum Ipx8 For Both Probe And Receiver Shall Be Supported With Manufacturers Or From Nabl/Ilac Or Equivalent Accredited Lab. (12) Software Interface / Configuration = Integrated Software Cycles Or Digital Rec Eiver Setup With Display And Remote Controller. (13) Status Indications = Visual Or Digital Display Of: Error Si Gnals, Probe Pulse, Battery Status, Signal Strength Etc. General Requirements:- (1) The System Should Be C Ompatible With Major Cnc Controllers And Open For Integration. (2) Setup, Calibration, And Testing Must Be D One At The Site By The Supplier. (3) All Associated Documentation (User Manuals, Circuit Diagrams, Paramete R Lists) Must Be Provided. (4) Training To The Cnc Operators And Maintenance Personnel Is To Be Included. ( 5) Manufacturers Test Certificate (Mtc) For The Product Shall Be Submitted Along With The Supply. In Additio N, The Manufacturer Shall Submit An Ipx8 Test Report / Certificate Of Confirmation Specifically Confirming Co Mpliance Of The Supplied Product With The Ipx8 Rating. (6) Oem Or Oem Authorized Dealers Only Shall Quote & Shall Submit Oem Authorization Letter/Authorized Dealer Ship Certificate (In Case Of Dealer)/ Oem Declarati On Along With The Offer. (7) Data Sheet Of The Product Quoted Shall Be Submitted Along With The Offer. [ War Ranty Period: 12 Months After The Date Of Delivery ] ] Sse Elecl. Axle Control, Karnataka 1.00 Set