Uncemented Total Hip Replacement Through Direct Anterior Approachuncemented Total Hip Replacement Through Direct Anterior Approach,Srphc82427065-Uncemented Total Hip Replacement Through Direct Anterior Approach: Unce Mented Total Hip Arthroplasty Each Set Consisting Of Modular Uncemented Femoral Stem Component With Proximal Porous Coating, Radialztt Steps, Grit Blast Distal Structure For Bone Ingrowth, Polishe D Distal Bullet, Circulo-Trapezoidal Neck Geometry, 12/14 Taper, Lateral Flats On The Neck Medial Roun Ded With Appropriate Offset Options And Sizes Varying From 0 To 8 With 1Mm Increment; Appropriate Head Sizes 28Mm, 32Mm, 36Mm Head Sizes +1.5,+5,+8.5,+12; And Uncemented Acetabular Cup One Number Of Porocoat Dome Designed Outer Acetabular Shells With One Number Of Uhmwpe Liner With Outer Dia Meter Varying From 46Mm To 64Mm With 2Mm Increment; With Two Or Three 6.5Mm Acetabular Screws Va Rying From 25Mm To 45Mm Increment. Should Be Supplied With Complete Set Of Instrumentation. As And When Required Basis. The Implant Should Be Supplied With The Specific Instruments For Direct Anterior Approach. The Implant Should Be Supplied With Traction And Leg Holding Assembly That Aids The Surgic Al Approach. ]