Molten Metal Temperature Digital Indicator.Molten Metal Temperature Digital Indicator.,Molten Metal Temperature Digital Indicator With Transmitter.Specification- 1. Auxiliary Input Supply: 230 Vac, +/- 15%, 50/60Hz. 2. Input Signal: Disposable Thermocouple K,R,S And B Type.(Factory Set Stype T/C). 3. Design: Microprocessor/Microcontroller Based Design. 4. Application: Temperature Measure Ment For Molten Metal Through Disposable Thermocouple. 5. Range: Full Positive Range Of The Selected Input, S

Molten Metal Temperature Digital Indicator.Molten Metal Temperature Digital Indicator.,Molten Metal Temperature Digital Indicator With Transmitter.Specification- 1. Auxiliary Input Supply: 230 Vac, +/- 15%, 50/60Hz. 2. Input Signal: Disposable Thermocouple K,R,S And B Type.(Factory Set Stype T/C). 3. Design: Microprocessor/Microcontroller Based Design. 4. Application: Temperature Measure Ment For Molten Metal Through Disposable Thermocouple. 5. Range: Full Positive Range Of The Selected Input, S Type: 0 To 1768 Degree C. 6. Accuracy: Within 0.1% Of The Range, Including Coldjunction Compensation. 7. Resolution: 1 Deg C (Factory Set To Degc). 8. Cold Junction Compensation: Automatic, Built In Sensor From 10 Degree C To 60 Degree C.9. Display: 4 Digit, Height: 2 Inch & Seven Segment Red Led Display.10. Measure Ment Time: 2 To 9 Seconds (User Programmable). 11. Plateau Detection: 0.1 Deg To 99 Deg C (User Program Mable). 12. Indication: Led/Pilot Lamp At Front Panel For Various Functions. 13. Audio/Visual Indications: For Thermocouple Continuity, Measurement In Progress And Measurement Completed Using The Built In Indicato R Andhooter. 14. Retransmission Output: 4-20Ma (Analogue, Scalable) Proportional To The Measured Temper Ature, Load Resistance Max 600 Ohms. 15. Relay Output: Four Relays , Potential Free Contacts For Driving Re Mote Audio & Visual Indicator. Relay Contacts Are Rated For 5A @ 230 Vac. 16. Data Storage: Readings Of M Easurements Are Stored In Thememory, Which Can Be Retrieved On Demand At Instrumentand Computer. 17. Communication/Interfacing: Serial Communication Rs 485 - 2 Wire For Remote Display & Computer Interface Through Usb. Required Software To Be Supplied Along With The Equipment. 18. Communication Port: Etherne T - Rj45, (Rj45 Port Shall Be Provided Within The Equipment). 19. Operating Condition: Ambient Temperature Up To 50 Degree C, Steel Foundry & Dust Environment. 20.Enclosure: Fabricated With Sheet Metal (Crca) Sh Eet, Minthickness Of 18/20 Swg, Single Door With Locking, Dust Freeconfirming To Ip 51 Class, For Portability One Handle To Beprovided On The Top Of The Instrument. 21. Painting: Metallic Powder Coated Gray Color. 22. Size: 340(W) X 300(H) X 200(D) Mm +/- 25 Mm. 23. Mounting: Wall Mounting Key Holes And Can Be Placed On A Flat Platform. 24. Makes: M/S Libratherm/ M/S Heaeus Exactly Equivalent Of Any Other Make. 25. Equip Ment Calibration Certificate Shall Be Along With The Instrument.26. The Supply Shall Have Provision For User Calibration Facility At Site. [ Warranty Period: 30 Months After The Date Of Delivery ] ] Page 1 Of 9 Run Date/Time: 28/09/2026 04:32:54Stores/Rwf Tender Document