Tunnelling Through the Ages

Tunnelling Through the Ages

History has seen the evolution of tunnelling starting with cave formation, for water management, underground transportation, mineral extraction and for warfare purposes. The oldest reference of a tunnel was in Persia where tunnels were built to connect wells called 'qanats' that provided a reliable supply of water in hot, arid and semi-arid climates. The deepest known qanat is in the Iranian city of Gonabad, which after 2,700 years, still provides water for drinking and agriculture purposes to nearly 40,000 people.

Initially, crude tools like chisels, hammers, spades and shovels, were used. But with increasing modernization, the civil engineering tunnelling technology has progressed by leaps and bounds. This is being realized through advancements in geological and hydro-geological engineering, tunnel design, capacity, construction methods, speed and maintenance during operations, and safety during construction and operations getting integrated in all aspects.

Historical evolution of tunnelling

In civil engineering application for tunnels, the need for revenue generation and meeting the objectives has led to manifold changes in tunnelling, but some fundamentals still remain unchanged. For example, the cut-and-cover method (that involves digging a deep trench, constructing a roof at an appropriate height and covering the trench) has its first reported use in 2000 BC in Babylon and is still employed in modern-day construction.

Geology is the most important factor that determines the nature, form and cost of any tunnel. Owing to the uncertain geology, tunnelling presents a risky undertaking primarily because of the geological complexity encountered, and also because of the lack of commensurate knowledge, skill and experience.

Although, the basic principles of geotechnical and geological engineering have remained the same, the application of interdisciplinary sciences, evolution of analytical tools, refinement in instrumentation and computational methods over the past 25 - 30 years have improved our ability to better understand the in-situ conditions, and hence, tunnel designs.

Twin Tunnel Breakthrough

The explosives technology has undergone significant advancements. What started with the use of gun powder as an explosive in the first mechanized tunnel construction (the drill and blast method) in France in 1681, transited to the use of Nitroglycerine as dynamite. During the past 50 years, ammonium nitrate has played a dramatically increasing role as an explosive. As a safer and sustainable alternative, water gel explosives have evolved over the last 25 years as commercial explosives.

Envisaging the construction of twin tunnels under the Thames River, between 1820 and 1865, British engineers Marc Brunel and James Greathead developed models of a tunnelling shield. To sustain construction speed and safer operations, ground stabilization techniques evolved over time. The technique of freezing the soil by circulating a coolant through the pipes was introduced in 1900 in USA.

Injection grouting into soils and weaker rocks was introduced in the 1970s as a mechanism for waterproofing and ground improvement. Concrete, initially used in the dry form (Guniting) in 1907, developed into its wet form (Shotcreting) in 1950. These were utilized both as preliminary and final lining options for tunnels.

In 1931, the first drilling jumbos were devised to dig tunnels that would divert the Colorado River around the construction site for the Hoover Dam. These jumbos consisted of 24 - 30 pneumatic drills mounted on a frame welded to the bed of a truck. Modern jumbos allow a single operator to control several drills mounted on hydraulically controlled arms.

In 1954, while building diversion tunnels for the construction of a dam in South Dakota, James Robbins invented the tunnel boring machine (TBM), a cylindrical device with digging or cutting heads mounted on a rotating front face that grinds away rock and soil as the machine creeps forward. Modern TBMs are customized for each project by matching the types and arrangement of the cutting heads to the site geology. Also, the diameter of the TBM must be equal to the diameter of the designed tunnel (including its lining).

Maroshi College Water Tunnel

Advancing tunnelling in India

The tunnelling history in India is not different from the tunnelling history of HCC. HCC's long-standing expertise in tunnelling dates to the inception of the company in 1926. Undertaking its first contract in 1926, HCC constructed the Bhoreghat Tunnel on the Mumbai-Pune Railway line in 1928. Evolving since then and never looking back, HCC, to its credit, has served the nation and the neighbouring countries by building over 290 km of tunnels for most civil engineering applications across challenging and uncertain geologies, extreme climatic conditions, using state-of-the-art technologies and practices.

With its unflinching determination, HCC has matured its understanding of tunnelling, starting with classical methods, the elementary drill and blast method, the cut and cover method, the New Austrian Tunnelling Method (NATM), shields and tunnel boring machines and special methods. With a contribution of one fourth of the nation's hydro power construction, HCC's 290 km of tunnelling experience can be divided as follows - 3% with the cut and cover method, 69% with the drill and blast method, 24% with the Tunnel Boring Machine (TBM), and around 4% with the NATM method. The tunnel construction experience includes major civil engineering applications viz. hydropower generation, water supply, irrigation and transportation infrastructure such as roads, railways and metros.

Dealing with variegated geology

Constructing tunnels through various geological formations in India and its neighbouring countries, HCC has a great deal of experience in dealing with proportionate and occasionally disproportionate magnitudes of uncertainties and risks. This includes tunnelling in soils that are relatively younger, assorted geological formations in the Himalayan region, the Pleistocene area, Deccan Trap, Gondwana, Vindhwan, Alluviam areas and pre-Cambrian geologies. The risk of construction has been present in almost all the seismic zones of India.

Encounters with the Himalayan mountains

Tunnelling through fragile, weak and jointed rock masses of the Himalayas is often challenging for planners, designers, engineers, geologists and, most importantly, construction contractors. This is primarily due to high overburden, thickly vegetated and inaccessible terrains, varied rock formations, presence of small and big shear zones/thrusts, and associated hydrological challenges. Tunnelling in such regions invites multiple, often unforeseen problems such as face collapse, chimney formation, water-inrush, hot water springs, gas explosion, squeezing and so on. Dealing with such issues necessitates responsive and "on the toes" engineering and construction, often requiring sleepless vigil and presence of mind. To alleviate and surmount such challenges, HCC has built sound construction practices that include detailed geological explorations, state-of-the-art designs, adaptable tunnelling practices, in-depth knowledge of monitoring, and feedback systems and mechanisms with an in-built culture of safety.

First successful TBM in Himalayan region - a world record: Undertaking one of the longest constructed tunnels in India (23.65 km length and 6 m dia) with a maximum overburden of 1,470 m, HCC utilized a double shield TBM for its Kishanganga hydropower project. Completing 14.75 km of tunnel, HCC created a world record of being the first successful TBM operator in the Himalayan region in a record time of 24 months, with an average monthly progress of 406 m. While dealing with adverse geologies, HCC also created a national record of the highest monthly progress in tunnelling of 816 m in the month of October 2013. The remaining length of 8.89 km was constructed using the drill and blast method.

Railway Tunnel

Building nation's longest transportation tunnel: Entrusted with the responsibility of building the longest railway tunnel, Pir Panjal (J&K), HCC utilized the NATM method for dealing with rugged terrains of the Pir Panjal region, connecting Bichleri Valley on the south side and the Kashmir Valley on the north. In this challenging and marvellous project in the history of Indian Civil Engineering, many geological surprises and challenges were faced in the relatively younger Himalayan geology. This state-of-the-art tunnel of 11.125 km is 100% waterproof and equipped with the latest fire fighting systems. As an accolade for completing this project, HCC was awarded two more projects along the same alignment.

Worst geology encountered so far: Dealing with the sub-Himalayan areas in Bhutan and some of the treacherous median to heavy zones of soil, HCC has successfully undertaken projects in Bhutan. During the construction of Dagachhu Hydro Power Project in Bhutan, HCC engineers experienced one of the most challenging geology. The ground strata were not adequate to hold the structure as there were several water courses beneath the surface and the land was marshy. Inclinometers and geotechnical equipment to measure underground movements/deformations and extensive monitoring systems were used. The results revealed that the land had significant underground movements.

To deal with this situation, the alignment of the head race channel was changed, and soil stabilization was utilized to improve the foundations with additional shotcrete and special anchoring. At the Head Race Tunnel, various support systems such as rock bolts, wire mesh with shotcrete, steel ribs, lattice girders and winches were used in varying quantities. Frequent encounters of this type made this project very challenging and added great value to HCC's experience.

Serving urban transport

Tunnelling in urban grounds is complex and challenging, often due to construction in soft soils, existing urban infrastructure, presence of high-rise buildings, public utilities and, most importantly, safety for human life. HCC has built India's first metro rail project at Kolkata, wherein 5.33 km of stretch was built using the cut and cover method, and a length of 1.14 km using the shield tunnelling method.

HCC has been involved in the construction of five underground sections, which are a part of the strategic plan of Delhi Metro Rail Corporation (DMRC). 4.47 km of stretch was built using the cut and cover method and a length of 10.30 km using the shield tunnelling method. The key to developing such designs is an understanding of tunnelling-induced ground loss mechanisms and the associated displacements, and the risks they pose to adjacent buildings, structures and utilities. The route alignment for this metro line passed below various heritage structures and buildings of national importance.

Underground Kolkata Metro

In its endeavour to serve the nation faster and keep its time commitment, HCC has deployed five TBMs at Delhi Metro, of which, four are operational at CC34 package, involving 4.4 km long twin tunnels on Janakpuri West-Kalindi Kunj Corridor, and one is operational at CC30 package, involving 2.2 km twin tunnels between Shalimar Baug and Subhash Place stations.

Meeting dimensional challenges

Largest diameter Tunnel Boring Machine deployed by HCC: For constructing a 19.2 km long tunnel for Pula Subbaiah Veligonda irrigation channel in Andhra Pradesh, HCC deployed a 10m diameter Double Shield Tunnel Boring Machine of Robbins make. The continuous lining behind the machine consists of 300 mm thick concrete segments in 6+1 arrangement, making the finished tunnel diameter 9.2m. The tunnel path was located in sedimentary rock with a number of faults and folds with some ground water. A probe drill mounted on the machine allowed for verification of the geology 30m ahead of the TBM. A strict programme of probe drilling combined with adequate ground stabilization allowed the TBM to advance through difficult sections of rocks.

Smallest and largest diameter tunnels: The smallest diameter tunnel constructed by HCC was for Brihanmumbai Municipal Corporation. It was a 2.74 km long sewage tunnel with a finished diameter of 2.5m, constructed using a shield TBM and lined with precast concrete segments. Tunnelling challenges included massive and weathered basalt as well as the groundwater level along the tunnel alignment. A Herrenknecht Hard Rock TBM of 3.065m diameter with integral automatic grout injection system was used for the construction of this tunnel. For the first time in India, a shielded hard rock TBM and the gasketed linings were used in this project.

The largest diameter tunnel constructed by HCC was for the Nathpa Jhakri Hydroelectric Power Project. The 1530 MW project boasts of the largest and longest Head Race Tunnel (HRT), the largest desilting chambers, the deepest and the largest surge shaft, and the largest underground power complex. Of the total length of the 27.4 km HRT, HCC was involved in the construction of the 11.33 km long concrete lined HRT of 10.15m finished diameter. Excavation of the HRT was carried out by the drill and blast method. The company also constructed the deepest surge shaft in India for this project, which was 301m in depth and 21.6m in diameter.

Delhi Metro

World record in long distance concrete pumping for tunnel lining

HCC created a world record in horizontal long-distance concrete pumping while constructing the Head Race Tunnel for the Sainj Hydroelectric Power Project in Himachal Pradesh. The concrete was successfully pumped for a distance of 2,432 m. The main reason behind opting for the long-distance concrete pumping methodology was the relatively smaller diameter of the tunnel. At 3.85 m finished diameter, the two-way simultaneous movement of transit mixers was not possible, effectively ruling out the conventional method of concreting. The project team tackled the challenges with precise planning, commensurate testing, training, responsive engineering and, most importantly, seamless coordination among the team members to achieve this major feat.

The way ahead

With India's strategic infrastructure development plans on their way to implementation, there is great scope for tunnelling in India, especially for developing urban infrastructure, underground rail and road networks, transportation in mountainous regions and so on. Refinements in designing capabilities and the ability to utilize instrumentation data will enhance our ability to foresee uncertainties and risks. In order to better access risks and uncertainties, detailed geological explorations will have to take deeper root. A greater level of mechanisation of tunnels will reduce construction time and help early revenue generation.

NBM&CW May 2018

Click Here
To Know More / Contact The Manufacturer
Please provide your details we will contact you as soon as possible
Please let us know your name.
Invalid Input
Please let us know your Designation.
Invalid Input
Please let us know your City.
Please let us know your State.
Please let us know your Country.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.

Srons Engineers, India’s first company to manufacture SDA Bars, has a strong quality control policy in place

Established in 2015 to support the growing demand of its Rock Hardware products, Srons Engineers is an Indian manufacturer of Rock Bolts, Self-drilling Anchor systems and Self Drilling Anchor Bolt parts like hollow bar & rod Read More ...

Tunneling, Rock Support & Geotechnical Solutions by MIPL & ROBIT

Machino International (MIPL) - a specialist company based in New Delhi, is a leading supplier of Construction, Tunnelling and Geotechnical products. The company has more than 30 years of experience in H.E.P, Road Tunnels, Cavern projects Read More ...

Turkey’s Tough Geology Inspires Robust Machine Design

Driven through a mountain side with 600-m of cover in Central Turkey, the Kargi Kizilirmak Hydroelectric Project is one of the most challenging tunneling projects ever completed in the region. The project is located on the Kızılırmak River Read More ...

CREG’s EPB TBM Ready to Perform in Italy

The Turin-Venice high-speed rail is part of the Pan-European Multimodal Corridor, which traverses the northern part of Italy and connects the northwest to the northeast of the country. It is an important gateway for Western European countries Read More ...

Characteristics & Categorization of Tunnel Fires & Their Mitigation

A fire that develops in a tunnel interacts with the ventilation airflow and generates complicated air flow patterns and turbulence in the vicinity. The heat generated warms up the surrounding air, and in case of a slope inside Read More ...

Mapei: Injection Solutions for Underground Construction

Injection can be defined as the introduction of a material with pressure into the ground or a structure for waterproofing and for consolidating voids, cracks and porosity. Generally, the injection can be categorised as Pre Read More ...

Tunnel Renovation Redefined

During renovation of the Hasselborner Tunnel in Central Hesse, Germany, contractor Baresel used a method they hadn't tried before. Parts of the tunnel lining had to be removed and the areas were subsequently Read More ...

GHH adds Shotcreting Machine to its - Tunneling Equipment Solutions

GHH is offering state-of-the-art and proven IS26 Concrete Spraying (Shotcrete) machine in India. The machine is suitable for shotcreting application in medium and large sized tunnels with cross sections ranging Read More ...

Kishanganga Hydro Power project – A New Power House

Inaugurated by the Prime Minister of India, the Kishanganga Hydro Electric Power project is the first mega hydro power plant to be awarded as EPC to HCC by NHPC. Located at Bandipore in north Kashmir, the Read More ...

Tunneling to Prosperity: Solutions, Equipment and Technologies

India is one of the fastest growing markets for tunnel construction due to various infrastructure development projects underway across the country. Tunnels are required for hydroelectric power projects, for improving road Read More ...

CREG: Tunneling Specialist

China-based China Railway Engineering Equipment Group Co., Ltd (CREG) is a subsidiary of the public- listed China Railway Engineering Corporation (CREC), a Fortune 500 company and a key state-owned company under Read More ...

Intermodality & Last Mile Connectivity - Creating Smart Walkable Spaces

Urban congestion needs to be addressed by encouraging high quality and innovative energy-efficient public transport integrating it with other forms of paratransit, ensuring last mile connectivity; working on Read More ...

Ashram Metro Station - An Engineering Masterpiece

One of the main challenges of constructing a station in the Delhi Metro Network, especially in a busy and densely populated area, is designing it according to the ambience and the limited space allocated. Constructing Read More ...

Transit Oriented Development - Challenges and Proposed Regulatory Framework

Transit Oriented Development (TOD) complements the concept of new urbanism. Compact, mixed-use communities are the answer to suburban problems. Due to the dynamic nature and multiplicity of underlying Read More ...

Simulating oversize and heavy vehicle manoeuvres using AutoTURN® from Transoft Solutions.

Use AutoTURN® to design infrastructure adjustments to safely operate trucks transporting wind turbine components. By Er. Alessio Gori - collaborator at POLITECNICA INGEGNERIA ED ARCHITETTURA SOC. COOP. Read More ...

Urgent Course Correction Imperative for Indian Railways

Railways’ freight and passenger businesses over the 5-year period, i.e., 2014-15 to 2018-19 (budgeted) indicate a flat growth. The number of total passenger journeys would record a CAGR of 0.22%, passenger kilometres Read More ...

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week