Ferro-Sialate Geopolymer using Red Mud

Smita Singh, Aswath, M.U and Ranganath, R.V.

Geopolymer is being used as a replacement for Portland cement for over the past three decades. The technology utilizes material rich in silica and alumina, either processed geological material or industrial byproducts as the raw material for the binder synthesis in the presence of alkaline medium. Natural alumino-silicate minerals used are mostly kaolin and metakaolin, whereas fly ash, slag, waste glass and red mud are the common industrial byproducts used for geopolymerisation. Agricultural byproducts like rice husk ash and palm oil fuel ash are also being used to synthesize geopolymer products. The properties of the geopolymer products vary with the type of raw material used. Apart from mitigating carbon emission, the greatest advantage of using the geopolymer technology is its capability to immobilize and encapsulate hazardous materials that become a part of the geopolymer matrix.

Prior to year 2010, there was the general opinion that the presence of iron was detrimental to the strength development of geopolymer. In 2008, Davidovits [1] recommended the percentage of Fe2O3 to be less than 10% and suggested that the presence of hematite and magnetite greatly decreased the compressive strength of geopolymer. In 2010, C. K. Gomes et al. [2] studied geopolymerisation of iron-rich lateritic soil containing 60% of iron. They reported the presence of Fe-O bonds in the geopolymer matrix. Mössbauer spectra analysis revealed the presence of structural Fe3+ inside an aluminosilicate structure, which suggested the replacement of Al3+ by Fe3+ in octahedral sites.

In his keynote presentation at geopolymer camp, 2012, Davidovits [3] introduced a new type of geopolymer binder called ferro-sialate-based geopolymer cement and also filed a patent for the same. The novel binder possessed the same properties as rock-based geopolymer binder but comprised of geological elements rich in iron content. The structure was of type (Ca, K, Na)-(-Fe-O)-(Si-O-Al-O-), fig. 1. Ferro-sialate-based geopolymer remains the focus of research in geopolymerisation field and has not been commercialised yet.

Ferro-sialate geopolymer structureFig. 1 Ferro-sialate geopolymer structure

In 2014, Esther A. Obonyo et al. [4] carried out investigation on geopolymerisation of two types of laterite soil, the first one with 9.68% of Fe2O3 and the second one containing 35.2% of Fe2O3. Kaolinite was the prominent mineral in both the type of soils. He studied the implications of incorporation of Fe3+ ion in laterite-based geopolymer matrix. As reported by him, iron played a key role during the geopolymerisation of the lateritic by creating a state of disorder in the structure of kaolinite, making it more vulnerable for dissolution and thereby assisting the geopolymerisation process. In the present investigation, the geopolymerisation of red mud is studied which is an iron-rich aluminosilicate material.

Material Characterisation
Red mud is a solid waste produced during the extraction of alumina from bauxite by Bayer’s process. Approximately, 1.5 to 2.5 tons of red mud is generated per ton of alumina produced depending on the raw material processed. The generation of red mud in India is reported to be 4.71 million tons, which is 6.7% of the global production of red mud, which is around 70 million tons [5]. There is continuous and rapid increase in the inventory of red mud. Its disposal remains a major concern for aluminum plants. Red mud cannot be used alone as a raw material for geopolymerisation due to its extreme fineness and cohesiveness, hence it was mixed with fly ash in varying proportion. Slag was used at constant 10% for all variations in order to facilitate ambient curing. Table 1 shows the chemical composition of red mud, fly ash and GGBS used. Iron is a predominant constituent of red mud comprising of nearly 40% of it.The red mud obtained was coarsely ground and passes through 300 micron sieve to ensure uniformity in test results.

Table 1 Chemical composition of red mud, fly ash and GGBS
Metal Oxide% RM FA GGBS
SiO2 9.93 61.54 37.73
Al2O3 18.1 25.37 14.42
Fe2O3 42.9 6.73 1.11
CaO 2.3 3.1 37.34
K2O - - -
Na2O 5.58 0.97 -
MgO - 0.73 8.71
TiO2 9.03 - -
P2O5 0.35 - -
V2O5 0.31 - -
SO3 - 0.62 0.39
L.O.I 10.5 0.39 1.41

The gradation curve showed that 90% of the red mud samples were found to be finer than 75μm and 80% were finer than 45μm. SEM image as shown in fig. 2. The silica content of red mud mostly is unreactive and exists in crystalline state as reflected in mineralogical analysis in fig.3. Lime reactivity of red mud was low with an average value of 0.95 MPa,which indicated its poor pozzolanicbehaviour. Silica reactivity test conducted on red mud samples, indicated the average percentage of reactive silica to be 1.6% only.Mechanical activation of red mud was done in order to improve its reactivity.

Ferro-Sialate Geopolymer using Red Mud

The processing of red mud increased its reactivity with lime from 0.95 MPa to 3.61 MPa, which was a significant increment of more than 300%. Grinding of red mud reduced the particle size and probably activated some of the silica that was otherwise crystalline to react with lime-forming di-calcium silicate. Silica reactivity test affirmed the increase in reactive silica percentage from 1.62% to 5.12%. Reactive silica of fly ash was 27.12% but its lime reactivity was lesser than that of pulverized red mud, this hinted at the participation of iron in increasing the reactivity of red mud. The XRD pattern of pattern of pulverised red mud and fig. 3 compares the diffraction pattern of both unprocessed and pulverised red mud. There was no major change observed in the diffraction pattern of both red mud samples but the hematite peaks were observed to be sharper. The SEM image of processed red mud in fig.4 no longer showed big lumps of particles. Grinding of red mud led to the dispersion of bigger agglomerates of hematite into nano-sized particles, fig. 5. Pulverisationof red mud presumably not only activated some silica for geopolymerisation but also made hematite more reactive.

SEM of unprocessed red mud and processed red mudFigure 4: SEM of unprocessed red mud and processed red mud

TEM of a) unprocessed and b) processed red mud [7].Figure 5: TEM of a) unprocessed and b) processed red mud [7].

Compressive strength of processed and unprocessed red mud geopolymerFigure 6: Compressive strength of processed and unprocessed red mud geopolymer
Compressive strength test done on red mud based geopolymer is shown in fig. 6. Strength of geopolymer binder synthesized from processed red mud was more for all variations. RM30 comprising of 30% processed red mud, 60% fly ash and 10% GGBS exhibited maximum strength of around 40 MPa.

It was iron in red mud that was making the difference as the alumina content of fly ash exceeded that of red mud. Past investigations have proven the existence of Fe-O bond in the geopolymeric structure [2, 3]. Furthermore, Esther A. Obonyo et al. [4] suggested that the presence of iron enhanced the dissolution rate of silica and alumina of kaolinite in laterite. In the present investigation, iron seemed to have not only participated in geopolymerisation but, more importantly, indirectly contributed to geopolymerisation by activating some other phases.

In order to validate the contribution of iron in geopolymerisation, Mössbauer Spectroscopy test was carried out. The Mössbauer spectral parameter was fitted using “NORMOS” computer programme. Fig. 7 shows the fitted Mössbauer spectra of unprocessed red mud (RM), pulverised red mud (PRM), RM30 and PRM30 samples at room temperature. As shown in the fig., the Mössbauer spectrum of each sample is fitted with two sub spectrum; one sextet and one doublet. The Mössbauer fitting parameters are tabulated in table 2.

Table 2.Mössbauer spectral fitting parameters of RM, PRM, RM30 and PRM30 sample. BHf = Hyperfine field, I.S = Isomer shift, Q.S = Quadruple splitting, ∆ = Width of spectra
Sample code Sub-spectrum BHf(T) I.S (mm/s) Q.S (mm/s) ∆ (mm/s) Area (%)
RM S1 50.40 0.264 -0.214 0.493 61.47
D1 0.250 0.598 0.450 38.53
PRM S1 50.51 0.255 -0.250 0.428 63.73
D1 0.260 0.578 0.424 36.27
GRM30 S1 50.49 0.263 -0.202 0.511 60.22
D1 0.255 0.587 0.478 39.78
GPRM30 S1 50.58 0.265 -0.233 0.497 63.09
D1 0.243 0.589 0.462 36.91

Room temperature Mössbauer spectra Figure 7: Room temperature Mössbauer spectra of RM, PRM, 6M_RM30 and 6M_PRM30 sample. The data points are shown in black dots
The presence of sextet in Mössbauer spectrum of RM sample could be attributed to the hematite phase. Fe3+ ions present in hematite phase gave rise to a sextet with a hyperfine field of 50.5 T. The relative percentage area of sextet and doublet was about 63 and 36%. The doublet in Mössbauer spectrum of RM sample could be assigned to the paramagnetic phases present in the sample. One of these paramagnetic phases consists of ferrihydrite that exists as a fine grained nanomaterial [8]. Ferrihydrite present in minerals (5Fe2O3•9H2O) exists as a metastable mineral which acts as a precursor to several crystalline phases as hematite and goethite [9-12]. The atmospheric CO2 reacts with ferrihydrite forming surface adsorbed species of carbonate [13].

Pulverisation of red mud would have caused the partial transformation of paramagnetic ferrihydrite phases into anti-ferromagnetic hematite phase. This was evident from the increase in percentage relative area of sextet of pulverised red mud sample (PRM).

From the table 2, it is observed that polymerisation of red mud and pulverised red mud has led to increase in the area percentage of doublets. This increase in area percentage might be due to replacement of aluminium with iron in the geopolymerised sample (RM30 and GRM30). As we know that geopolymer is an inorganic polymer with silicate and aluminate linkages (Si-O-Si and Si-O-Al). Gepolymerisation of red mud would cause the partial replacement of Al3+ ions with Fe3+ ions into the alumina-silicate linkage. The presence of Fe3+ in the silicate linkage in the paramagnetic form would result in increment of the doublet in Mössbauer spectra.

A large inventory of red mud is present globally which could be hazardous if left to pile up. The main constituent of red mud is iron oxide and it has a potential to be used in geopolymerisation due to presence of alkalies, silica and alumina. Results presented in the characterization test on red mud show that it is non pozzolanic in nature due to the prevalence of non - reactive silica. But the existence of agglomerates of red mud particles in nano scale range and its high alkalinity is likely to have a favourable influence on geopolymerisation process and strength development. Pulverization reduced the particle size and increased the fineness and reactive silica of red mud.

Mössbauer spectroscopy and FTIR tests on the geopolymerised binder confirmed the participation of hematite phase of red mud in geopolymerisation. Pulverisation of red mud not only enhanced its pozzolanic behavior by increasing the percentage of reactive silica but also increased the reactivity of the hematite phase. The recommended use of ambient cured red mud based geopolymer could be in the production of high strength concrete, bricks/blocks and pavers. Ferro-sialate based GPC has a great potential in India due to the presence of huge deposits of unutilized mine wastes.

  1. J.Davidovits, “Geopolymer Chemistry & Applications”, Geopolymer Institute, 2008, Chapter 12.
  2. G.K.Cristiane, G.S.T.Lima, T.S.Marden, De Barros Silvio, V.I.Frota, B. N.Perazzo, “Iron distribution in geopolymer with ferromagnetic rich precursor”, Materials Science Forum Vol. 643,2010, pp 131-138.
  3. J.Davidovits,“State of the Geopolymer R&D”, 2012. http://www.geopolymer.org/camp/gpcamp-2012.
  4. A.EstherObonyo, E.Kamseu,P.N. Lemou- gna, B.Arlin,Tchamba, U.C. Melo and C.Leonelli, “A Sustainable Approach for the Geopolymerization of Natural Iron-Rich Aluminosilicate Materials”, Sustainability, Vol. 6, 2014, pp 5535-5553.
  5. G.N.Reddy and K.S.Chandra, “Characteri- zation and Comprehensive Utilization of Red mud - An Overview”, International Journal for Scientific Research & Development, Vol. 2, Issue 1, 2014, pp 2321-0613.
  6. S. Singh, M.U. Aswath, and R. V. Ranganath, Effect of mechanical activation of red mud on the strength of geopolymer binder, Constr. Build. Mater. 177 (2018) 91–101. doi:10.1016/j.conbuildmat.2018.05.096.
  7. Singh S, Aswath MU, Das Biswas R, et al (2019) Role of iron in the enhanced reactivity of pulverized Red mud: Analysis by Mössbauer spectroscopy and FTIR spectroscopy. Case Stud Constr Mater 11:e00266. https://doi.org/https://doi.org/10.1016/j.cscm.2019.e00266
  8. W.Salama, M.El Aref, Reinhard Gaupp, “Spectroscopic characterization of iron ores formed in different geological environments using FTIR, XPS, Mössbauer spectroscopy and thermoanalyses”, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, Vol. 136, 2015, pp 1816-1826.
  9. U.Schwertmann, E.Murad, “Clays”, Clay Minerals, Vol. 31, 1983, pp 277.
  10. U.Schwertmann, J. Friedl, H. Stanjek, Journal of Colloid and Interface Science, Vol. 209, 1999, pp 215-223.
  11. U.Schwertmann, H.Stanjek, H.H. Becher, Clay Miner., Vol. 39, 2004, pp 433-438.
  12. Y.Cudennec, A. Lecerf, “The transformation of ferrihydrite into goethite or hematite, revisited”. J.Solid State Chemistry. Vol. 179 (3), 2006 pp 716–722.
  13. D.B.Hausner, N.Bhandari, Andro-Marc Pierre-Louisa, J.D. Kubicki, D.R. Strongin, “Ferrihydrite reactivity toward carbon dioxide”, Journal of Colloid and Interface Science, Vol. 337, 2009, pp 492–500.
About Authors
Dr. Aswath M U
Dr. Aswath M U Professor Aswath is the Director/Principal at Bangalore Institute of Technology, Bengaluru and National President of Association of Consulting Civil Engineers (India) - ACCE (I).

He is the Bureau Head Bangalore for SME World, New Delhi, Technical Adviser for RMCMA and former Secretary General for All India ACCE (I) and former Vice president (south) of Indian Concrete Institute. As Training and Placement officer, he has placed more than 35 thousand students in national and multinational companies. He joined Rotary in the year 2009 and took up the Presidentship in 2012-13 during which time the club took a new shape and initiated major events like SME National Awards for Excellence, Spell Star, NufACE etc. He was President of Rotary Bangalore south east and Assistant Governor in Rotary International district 3190.

He has published more than 100 papers in national and international journals/conferences and has organinised more than 300 workshops/seminars for professionals/faculty members/students for knowledge dissemination. His list of awards includes:
  • “Achievement Award for Outstanding Academician”, CIDC Vishwakarma Award 2014, The National Award is conferred on 7th March 2014 by Construction Industry Development Council (CIDC) established by Planning Commission, Government of India and the Construction Industry.
  • Felicitation by the Honourable Chief Minister-GoK, Shri. Jagadeesh Shettar for editing the Manual: Editor-in-Chief for “Reference Manual for Field Engineers on Building Construction” published by Task Force for Quality Assurance in Public Constructions, Government of Karnataka.
  • Eminent Engineer By ACCE(I) Bangalore Centre, Felicitation during the Engineers Day Celebration, September 2011
  • Academician Par Excellence by Rotary
He is actively involved in many professional associations and is providing solutions to societal problems and is also a freelance journalist.

Dr. Smita Singh
Dr. Smita Singh is Assistant Professor of Civil Engineering at Amrita School of Engineering, Bengaluru. She completed her B.Tech. at NIT Patna with distinction in 1998, M.E. in Structural Engineering in 2008 and Ph.D. in 2019. Dr. Singh started her career as a Design Engineer at Stup Consultants Pvt. Limited and was involved in foundation, substructure and superstructure design of Bangalore Metro. During her academic career of more than 10 years till now, Dr. Singh has taught various subjects at UG/PG levels and has edited 2 conference proceedings and organised 4 International Conferences. Her key research area is Geopolymer Technology using industrial wastes. She has published more than 10 papers in International Journals which includes a paper on Construction and Building Materials with impact factor of 4.7 and 15 papers in proceedings of International / National conferences. Dr. Singh has guided several Dissertations/Projects at PG/UG level and presently guiding one Ph.D. Dr. Singh has also handled no. of administrative assignments successfully and made exemplary contributions through her committed and innovative approach with high integrity.

Dr. R.V. Ranganath obtained B.E.,(Civil Engineering) degree from National Institute of Engineering, Mysore University and M.Tech, Ph.D.,inIIT Delhi.Presently, he is working as Professor in BMS College of Engineering, Bangalore. His research interests include Fly ash/pond ash Concrete, Self-Compacting Concrete (SCC), Geopolymer Concrete using Fly Ash, Slag and other industrial by-products. The essences of his research have been documented in about 60research publications in various international, national journals and conferences. He has been active in Professional organizations like Indian Concrete Institute and has taken initiatives in organizing several Seminars, Conferences and exhibitions. He was the Honorary Secretary and Chairman for ICI-Karnataka Centre during 2004-2006 and 2010-12. He is a recipient of AICTE Career Award for Young Teachers in 1998 and “ICI-FOSROC Award for Outstanding Concrete Technologist for the year 2011” by Indian Concrete Institute.

NBM&CW May 2020

Click Here
To Know More / Contact The Manufacturer
Please fill in your details, we will contact you as soon as possible
Choose Title from the listPlease let us know your name.
Please let us know your Designation.
Invalid Input
Please let us know your email address.
Please let us know your City.
Please let us know your Contact Number.
Please brief your query.
Our other value-added services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Equipment & Machinery
Invalid Input
Building Products
Invalid Input

Mechanical Properties of Geopolymer Concrete with Alternative Materials

Concrete is considered the world’s most versatile, durable and reliable construction material, next only to water. It is the most consumed material requiring large quantity of cement, fine aggregates, course aggregates Read More ...

Geopolymer Concrete - The Eco Friendly Alternate to Concrete

The name geopolymer was given by “Joseph Davidovits” in 1978. Geopolymer concrete (GPC) is an eco friendly product which uses industrial waste by-products such as fly ash (waste from thermal power plants) and ground Read More ...

Compressive strength study of Geopolymer Mortar using quarry rock dust

T. Venu Madhav, Head Department of Civil Engineering, Audisankara College of Engineering & Technology, Gudur, Andhra Pradesh, India. I.V. Ramana Reddy, Professor, Department of Civil Engineering, S.V.U. College of Engineering Read More ...

Use of Factory Made Reaction Generating Liquid (RGL - SRGPJ1) to Produce Geopolymer Concretes

Geopolymer binders, formed by alkaline activation of aluminosilicate precursors, are attracting interest as “green” cements because of their use of industrial wastes such as geothermal silicas, fly ashes and mineralogical Read More ...

Performance Evaluation of Fly ash and GGBFS Blended Self-compacting geopolymer concrete

An attempt has been made to develop Fly ash (FA) and Ground granulated blast furnace slag (GGBFS) blended self-compacting geopolymer concrete mixes with varying volume of pastes using conventionally available river sand Read More ...

Robustness of Self-Compacting Geopolymer Concrete (SCGC)

It’s widely known and has been reported on numerous occasions and in multiple journals that concrete is one of the most used construction materials in the world. With current cement production in excess Read More ...

Recent Developments in Concrete Technology

Recently, two new developments in concrete technology can have a far reaching impact on the way we consume concrete in construction. Concrete happens to be the largest in terms of weight—being about more than 5 tonnes per capita Read More ...

Green Products from the House of JSW Cement

"Through our wide range of future-ready, superior quality green products, we meet the evolving demands of the construction industry in India," avers Lopamudra Sengupta, Vice President (Technical services) JSW cement Read More ...

Sensitivity Analysis of Cable Profile of Prestressed Concrete Beams

The cable profiles for post-tensioning of concrete beams are usually designed as parabolic curves based on the eccentricity of the midpoint of the duct to the neutral axis of the beam. The end points and the midpoint of a duct are very important Read More ...

Overview of Concrete Ingredients, Concrete Mixes and Durability Requirements in Arabian Peninsula

Arabian Peninsula usually has either a tropical or subtropical arid desert climate or arid steppe climate. Arabian Desert - the great desert region in the extreme southwestern Asia - occupies almost the entire Arabian Peninsula. Read More ...

Industry 4.0 in Construction 3D Printing

The discovery of fire has generally been considered as the first and most significant discovery of mankind. Millenia and four industrial revolutions later, humanity has forged ahead and shown no signs of slowing down the scientific and technical Read More ...

Sustainability of Concrete Using Copper Slag as Replacement for River Sand

Concrete consumption is so extensive that it stands second to water. Spiraling urbanization has led to excessive consumption of concrete, which has increased the demand for sand, cement and coarse aggregates. The sand consumption across Read More ...

GGBFS Replacement for High Early Strength Concrete for Precast Industry

The Precast Concrete industry is one of the thriving industries in the wake of faster development with high quality standards. The initial capital cost for precast construction is higher than for conventional concrete. The chief requirement Read More ...

Simple Guidelines for Producing Sustainable, Durable and Economical Concrete

There is a dire need to control environmental pollution across the world. Concrete is a must for infra development. Cement, which is the main binding material for concrete, adds CO2 to the environment. At present 7.4% of CO2 is contributed Read More ...

Design & Construction of Composite Structures

Arun Nadig, Director, Nadig Consulting, presents two award-winning projects in composite construction technique for modern office spaces, which have been duly recognised by the Construction Industry Development Council (CIDC) for Read More ...

Self Concrete Mixer: AJAX Soaring Up New Heights!

AJAX, a world-class leader in providing concreting business solutions, was established in 1992 for manufacturing Self-Loading Concrete Mixers. Today, it is positioned as a global leader in this product category. Over the years Read More ...

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week