Finland pavilion in Shanghai World Expo 2010

Finland pavilion in Shanghai World Expo 2010

Finland's pavilion for the Shanghai World Expo 2010 is called Kirnu, or ‘Giant's kettle'. Tekla Structures BIM (Building Information Modeling) software is being used to model and manage its structural information in 3D throughout the project. The use of Tekla Structures supports the pavilion being constructed as a laboratory for sustainable building.

A big challenge for the near future is to find methods of construction that are sustainable and preserve natural resources. The Kirnu pavilion is a laboratory for sustainable building, presenting Finnish solutions for future urban construction. The goal is to develop energy-efficient, low-emission and environment-friendly solutions in terms of construction method and maintenance properties. Finland is one of around 70 participants, states and companies, building its own pavilion for the Expo 2010.

Designed by JKMM, an architects' office in Helsinki, the pavilion won first prize in a design competition announced for the occasion. The design incorporates, for example, renewable energy sources. The construction materials and methods have been selected so that construction generates as few greenhouse gas emissions as possible and the building will be easy to disassemble and rebuild after the Expo. In addition to efficient structural design and lean prefabrication and construction, the Tekla 3D building information model is being utilized in a variety of innovative ways throughout the project: to fit in elevators, HVAC systems, and a giant canvas that will cover Kirnu's inside atrium, as well as to assist in its interior design and later rebuilding and relocation using augmented reality technology.

Construction Management

Finnish project constructing company Lemcon Ltd was selected for the project management of the Finland pavilion's construction at the Shanghai Expo 2010. A consultancy agreement was signed between Lemcon and project owner Finpro. Lemcon China Co. Ltd provided full project management, 3D design coordination using Tekla Structures software, and supervision related to the pavilion's construction. Lemcon was also responsible for the design and construction of the Finland pavilion at the Hannover World Expo in 2000.

"In accordance with our environmental objectives, it is a principle of Lemcon to model the building information of every domestic project," said Mikaela Jänkälä, project support manager at Lemcon Ltd International in Finland. "We are participating, for example, in the Built Environment program of the Finnish Funding Agency for Technology and Innovation (TEKES). Kirnu is our pilot project in China, and Tekla was chosen for the modeling of the project because we needed a tool that will best help us disassemble the challenging structure later and to document the whole process. Tekla Structures will be the only BIM software used for Lemcon sites in the future."

Finland pavilion in Shanghai World Expo 2010
The pavilion's load-bearing frame structures are made of steel. The horizontal structures are made of steel casing elements and the floors of plywood-plates. Steel sheet structures will be used for the inner lining. The outer façade will be covered with scale-like modern shingles made of paper/plastic composite sheet, a Finnish industrial recycled product. The atrium walls will be made of fabric. The stairs and lift will be constructed from steel and glass elements. All of the construction elements will be made in such a way that the building can be disassembled and re-assembled.

"The Task Manager function in Tekla Structures is particularly useful, because we've been getting weekly reports from China, including illustrative snapshots, of what parts have been installed on which level," said Artur Virit of Lemcon Finland. "Tekla experts in Finland have been very helpful in finding a solution to any structural challenge that has come up during the project. A light Web version of the model has been exchanged through the Internet to be able to communicate about the structure in detail, and the Tekla database file has been sent back and forth through a Web link to create a combined model of different phases of installation. I believe that the new Model Organizer function in Tekla Structures would have been a great help at the very cramped site," Virit said.

Structural Design

Conceptual structural design by Finnish engineering office Aaro Kohonen Oy provided the idea of a space frame structure system for the Kirnu pavilion. The final structure of the pavilion uses 21 lattice pipe columns, which are variable cross-sections and unique curved shapes. The floor is made of composite decks that can be disassembled. "Tens of thousands of bolt connections were needed in the building to enable easy disassembly after the Expo. A challenging part in the project was to design and detail all these bolt connections accurately," said Pekka Haanpää, Lemcon's design coordinator in China.

The final 3D building information model of Kirnu will simulate its real-world as-built structure. Shanghai Engineering Survey and Design (SCAD) Ltd created a 3D structural model with Tekla Structures that will be used throughout the construction process of Kirnu. Lemcon China Co. Ltd Shanghai office provided design coordination and supervised SCAD in utilizing Tekla to produce the model, and Tekla Shanghai and Tekla Finland provided software support for Lemcon's BIM pilot in China.

Finland pavilion in Shanghai World Expo 2010

As the cladding processing period for Kirnu is long, the design and fabrication of the cladding was done at an early phase to ensure that the construction can be finished on time. JKMM Architects used Rhinoceros software to design the shingle cladding. The cladding surfaces were imported into Tekla Structures as position references to ensure that the shape of the steel structure is designed correctly. The Tekla model was then exported into Rhinoceros to double-check the cladding position and shape of the building. SAP 2000 software was used for the design calculations. Both SAP 2000 and Tekla support open API (Application Programming) that enables full roundtrip functionality between the two software applications. Because of this feature the Tekla model can be easily updated after calculations and vice versa. Detailed design for the construction was finalized with Tekla Structures after the calculations.

Steel Fabrication

Shanghai Baoye Construction won the bid for the Kirnu project's steel fabrication and erection in April 2009. All steel parts and assemblies were named, numbered and specified according to the guidelines of design coordination. Bolt connection information was given to Baoye engineers, and they created connections to the Tekla model.

"Engineers checked out the complex connections by rotating the model and were able to accurately generate all steel shop drawings from the structural model, thus saving in material costs and avoiding waste. It would have been impossible for engineers to convert this curved structure into 2D drawings by using just 2D software," said Haanpää. The construction management team used the 4D scheduling functions in Tekla Structures to follow up on the steel fabrication process and erection of the building.

Owner's View

Finland pavilion in Shanghai World Expo 2010

"From the day that Kirnu was chosen for the Finnish Pavilion it was quite clear that there is a need for 3D steel design software," said Jouni Lehtonen, construction manager for Finland at the World EXPO 2010 and representative of Finpro. "We knew that Tekla Structures is Finnish software and one of the best on the market, so it was quite an obvious choice. Aaro Kohonen Oy who made the conceptual model also suggested using Tekla."

"There was a relatively short preparation time for the project so we needed every possible time-saving solution we could find to complete the design in time. Tekla Structures provides actual masses of the structure and so it is a fair solution for both the contractor and Finpro. The after-use aspect was also important," Lehtonen explained. "The structure of Kirnu has been designed so that up to two additional floors can be built if needed. If there is a need for additional elevator shafts or staircases, the software will make designing them easier."

Tekla's model-based software products make customers' core processes more effective in building, construction and infrastructure management. Tekla Corporation has area offices and partner organizations world-wide. International operations account for more than 80% of net sales. Founded in 1966, Tekla is one of the longest operating software companies in Finland.

Tekla's technology creates new opportunities for the construction industry. Tekla Structures, the most advanced BIM (Building Information Modeling) software on the market, provides an accurate, dynamic, and data-rich 3D environment that can be shared by contractors, structural engineers, steel detailers and fabricators, as well as concrete detailers and manufacturers. The highly detailed as-built structural models created in Tekla Structures enable the highest level of constructability and production control. Centralizing model and non-model based data into the model allows for more collaborative and integrated project management and delivery. This translates into increased productivity, elimination of waste and an enhanced value for structural modeling.

NBMCW August 2010

Click Here
To Know More / Contact The Manufacturer
Please provide your details we will contact you as soon as possible
Please let us know your name.
Invalid Input
Please let us know your Designation.
Invalid Input
Please let us know your City.
Please let us know your State.
Please let us know your Country.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.

Simulating oversize and heavy vehicle manoeuvres using AutoTURN® from Transoft Solutions

Narrow mountain roads, steep hills and challenging ‘S’ curves are just part of the landscape in the ‘toe’ of Southern Italy, where wind farms are becoming a common part of the countryside. With green technology like wind Read More ...

Atlas Copco XA316 and XAT266 portable air compressors for Mumbai underground metro line

Atlas Copco portable air compressors have been deployed for the first underground metro line in Mumbai, and they are not just under the supervision of Mumbai Metro Rail Corporation Limited (MMRCL) but also under Read More ...

Indira Paryavaran Bhawan - First On-site Zero Net Energy Building of India

A zero-energy or a net zero building is a building with zero net energy consumption from outside source, which means that the total amount of energy used by the building on an annual basis is almost equal to Read More ...

Making of a Green Data Centre

Data centres make up 3% of global energy consumption. The main reason behind data centres being major energy guzzlers is the IT processing power, which has increased substantially to meet the growing Read More ...

Apollo ValueTec Plant Gives Competitive Edge to Rana Builders

Dhaka-based Rana Builders (Pvt.) Ltd. specialises in construction of roads, bridges and buildings. When purchasing a new asphalt-mixing plant, it wanted a product that would help meet its objective of on-time delivery Read More ...

BHAI concrete batch mix plant working at Asia’s largest waste-water treatment plant

Delhi Jal Board is setting up a 318 MLD (70 MGD) wastewater treatment plant at GT Karnal Road on the outskirts of Delhi. The ₹414.78 crore project, said to be the largest in Asia, is being constructed by EPC contractor-Larsen & Toubro Read More ...

The Fast Lane to Growth

When the National Highways Authority of India (NHAI) last widened the Vijayawada-Chilakaluripet Highway in the early 2000s, the country was at the beginning of its exponential economic growth. Since then, the nation’s GDP Read More ...

Insitu Investigation of Cinder Mound For Building Construction - A Case Study

Cinder is a waste generated as coal residues from the blast furnace of thermal power plant. It was accumulated over a long periods near railway station, Jamshedpur, Jharkhand, India. This dumping Read More ...

SoilTech Mk. III - 3rd Generation nano-polymer stabilization

Golfshire is a super-premium residential project in Bangalore, comprising luxury villas, a 18-hole PGA standard golf course, a large convention centre with seating capacity of 5000, and a 5-star hotel. The project is Read More ...

Especially Designed Rope Suspended Platform for Dam & Silo Projects

New Age Construction Equipment Engineering Company is one of the leading manufacturers of construction equipment like Rope Suspended Working Platforms (Gondolas/ Cradles), Bar Bending Machines Read More ...

New Age Offers Customized Solutions with Higher Productivity & Safety

As a leading manufacturer of construction equipment, we believe in superior performance, higher productivity & safety, faster execution and timely completion of projects,” says Mr. Jayesh Vadukiya Read More ...

Rehabilitation of National Highway at Tripura-Assam

The National Highway NH-44 is a major road artery for the North-East. The stretch of this highway leading to the border of Assam and Tripura (two states in the north-east of India), is the only land-link between Read More ...

Wirtgen Milling & Recycling Machines give Excellent result at NH-2

Wirtgen most compact and versatile machines W2000 and WR240 have been used for milling and cold in situ recycling works by contractor Soma during the road rehabiliation of Varansi-Aurangabad section Read More ...

KYB-Conmat's Advanced Mechanization Parallel Lower Ganga Canal Lining Project

Tougher norms for quality & safety in the industry have pushed contractors & developers towards advanced mechanization for their projects to deliver quality results in set timelines. It has also Read More ...

3D Design Software Helps Engineers Prove Their Clients’ New “Home” is Ready for Work

Transoft VLMK
Whether it’s moving across town or across the country, there are always boxes to pack and trucks to fill. But what if the core of your business IS trucks and you didn’t have a choice about moving? That’s exactly Read More ...

Comparative Study of Basalt And Carbon FRP Bonded Steel Beams and its Finite Element Modelling

Finite Element Modelling
The use of Fibre Reinforced Polymer (FRP) sheets to strengthen the steel structures has become an attractive option which may ensure confident retrofitting of existing steel structures. Conventional strengthening Read More ...
NBM&CW

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture
L&ST

Lifting & Specialized Transport

Lifting & Specialized Transport
II&TW

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week