FAIRMATE manufactures a complete range of construction chemicals and provides cost-effective solutions and world-class services to the Speciality Construction Chemicals Industry in alliance with leading partners and experts.

The company’s product range consists of a variety of chloride-free and chloride-based concrete admixtures for increasing the workability of concrete. Products include Normal Plasticizers, Super Plasticizers, Retarders, Slump Retainers, Accelerators etc.

FAIRMATE is also offering fourth generation Concrete Admixtures which ensure very high slump retention and early strength, and mineral admixtures like Micro Silica, and Fly Ash Admixtures for plasters, which gives better consistency. The company’s new generation of admixture is based on modified polycarboxylic ether, as well as cellulose fiber, polypropylene fibre and steel fibre.

FAIRMATE’S Brocrete C 800 and Brocrete S 888 {high range water reducer slump retainer} are two of the preferred polycarboxylic ether admixtures; they have been developed primarily for application in high performance concrete where utmost durability and performance are required.

Advantages of Brocrete C 800 and Brocrete S 888
  • Reduced thermal peaks
  • Improved workability: easier, quicker placing and compaction
  • Reduced segregation: increased cohesion minimizes segregation and bleeding
  • Improved surface finish
  • Resistance to segregation even at high workability
  • Extended setting with longer workability
  • Reduced permeability and improved durability
BROCRETE S 888BROCRETE S 888 – It can be used with all type of Portland Cements. Ideal for longer workability in crusher and sand condition.

Applications of Brocrete C 800 and Brocrete S 888
Brocrete C 800 is ideal with lower and higher grade of concrete mix in pre-stressed and precast work, pavement concrete, exposed slab concrete, and in mass concrete pours. It is used to produce high workability concrete, requiring little or no vibration during placing, and can be used for all types of cement.

Brocrete S 888 can be used with all types of Portland Cement and is ideal for longer workability in crusher sand condition. It can be used in ready-mix concrete for obtaining high workability without affecting the concrete’s properties.

BROCRETE C 800BROCRETE C 800 – Ideal with Lower and higher grade of concrete mix in prestressed and precast work, pavement concrete, exposed slab concrete and mass concrete pours.

Packing and Dosage
Brocrete C 800 and Brocrete S 888 are supplied in 50, 100, 200, and 225-kg carboys, and in bulk quantity on request. The normal dosage is about 0.6%-1.5% by weight of cementitious material. However, the optimum dosage is determined by site trials.
Click Here
To Know More or to Contact the Manufacturer
Please let us know your name.
Invalid Input
Please let us know your Designation.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.
Our other Value-Added Services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Invalid Input
Invalid Input
Invalid Input
Innovation and entrepreneurship are essential ingredients in building a successful commercial venture. The ways in which these two concepts fuel enterprise are something entrepreneur's never stop exploring. There is no doubt that innovation were

Read more ...

Alite and belite are the predominant phases of Portland cement formulation. Alite is impure tricalcium silicate (C3S) and belite is impure dicalcium silicate (C2S). The impurities are an integral part as cement is manufactured

Read more ...

Concrete is a versatile construction material and day by day its consumption is increasing globally. It is second only to water in the global consumption. No civil engineering structure is feasible without using concrete

Read more ...

The use of Graphene with concrete has been talked about and researched ever since Graphene was invented in 2010 which grabbed its inventors a Nobel prize. Nanospan is the first company in the world to break technological and commercial

Read more ...

Fosroc is the foundation of the JMH Group. It employs over 1700 employees in 17 operating companies based in Europe, the Gulf & Middle East, India, South Asia, and China. Through FGT, its trading company, it services another 50 countries

Read more ...

Established in 1983 by French expatriate entrepreneurs, the Dextra Group has a long history of growth and development, driven by strong entrepreneurship and innovation. It has diversified into three main activities: manufacturing, trading and freight forwarding

Read more ...

Jyotirmoy Mishra, Ph.D. Scholar, Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha, presents his research on the feasibility and compressive strength performance of geopolymer concrete

Read more ...

As every one ton of Cement (OPC) produced, emits 0.96 tons of CO2, there is an urgent need to promote blending materials (ex. GGBS &PSC) and screened slag, to achieve lower CO2 emissions, reduce greenhouse gas effect, reduce exploitation

Read more ...

In most of the developing countries, demand for steel for use as a reinforcing material is increasing day by day. However, when steel is in short supply, one can consider bamboo as an alternative material for reinforcement

Read more ...

There is high demand for white cement in countries with hot climates, as more heat is reflected from white concrete surfaces as compared to standard grey concrete. As a value-added product, white cement is becoming

Read more ...

Garry Martin, Director - Major Projects, Low & Bonar Construction Fibres, presents a new examination of the benefits of micro fibres in both the plastic and hardened state of concrete and their contribution to increased sustainability.

Read more ...

An integrated material and structural design strategy of strength through durability is the need of the hour since structures are designed for ductility and structural integrity. Dr. S. B. Hegde, President – Manufacturing

Read more ...

The demand for structural strengthening of ageing structures is growing rapidly in buildings, industrial structures, infrastructure projects like bridges, dams, etc. Structural Strengthening also

Read more ...

Durability and strength are two most important criteria and requirements for the long-term performance of concrete structures against weathering action, chemical attack and abrasion. Any deficiency

Read more ...

Cement is a key binder component of concrete production in the building industry. It is a complex hydraulic binder, made up of four main clinker components; alite (Ca3SiO5), belite (Ca2SiO4)

Read more ...

Corrosion of concrete is a major issue and many concrete structures on adverse environment have experienced unacceptable losses in terms of serviceability, ultimately requiring replacement

Read more ...

Cement is the most used industrial commodity required for development, but it is also responsible for high GHG emissions; so there is a need to create a balance between the nation’s growth and environment sustainability

Read more ...

Cement concrete is the most consumed materials on the earth next only to water. The ingredients used in preparing concrete are not sustainable. The ingredients are responsible for causing global warming. The most

Read more ...

India’s ready-mix concrete (RMC) market is projected to witness a 7-9% CAGR in the next five years. This growth is predominantly driven by the increased investments in the development of infrastructure throughout

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.