Chowgule in JV with German-based AB Polymerchemie GmBH has a ground-breaking epoxy and PU-based product series, for industrial and public sites – based on the sophisticated realization of chemical and physical principles.

Whether a coloured protective paint or a sophisticated industrial system is required, through our joint venture with German-based AB-Polymerchemie GmbH, Chowgule ABP (India) Coatings Pvt Ltd offers a huge range of epoxy and polyurethane floor coatings.

These coatings that are used mainly in industrial and commercial areas provide a seamless, clean surface with a range of finishes for both inside and outside applications. These coats not only protect concrete from wear, chemical corrosion and deterioration but also help in providing faster material movement and cleaning costs, producing a cleaner work environment and decrease injuries with non-slip surfaces. Apart from these, they also increase light reflectivity and brighten work areas.

Polyurethane Floor Coatings

These high performance floor coatings are nonyl phenol, alkyl phenol, softener and solventfree. Polyurethane, produced using sophisticated machinery, are free of contaminants, air-bubbles which also provide excellent flowability. This ensures fault-free and easy applications for the contractors.

Strict adherence to a policy of solvent-free materials (VOC < 1%) and freedom from hormonally active substances such as alkyl phenols, plasticisers or other migrating materials stand for Chowgule ABP's traditional and proven approach also in this innovative product series. Chowgule ABP products are physiologically safe after hardening.

Chowgule ABP products are resistant against many organic, inorganic or biological substances, for examples: oils and fuels (acc. to the "Technical Rules on combustible fluids" TRbF), solvents, alcohols, such as ethanol, leaches, thinned acids, aggressive gases, concentrated saline solutions, sea and sewage water, microbes and their deposition (MIC – Microbial Induced Corrosion). Long-term durability tests in the laboratory and practical applications under toughest conditions (chemical, thermal and pressure strain) prove the impressive resistance and outstanding endurance of Chowgule ABP's coatings.

Floor Coatings Epoxy Floor Coatings

Top-quality for any product is achieved only with a motivated and qualified team, innovative research and development and a consistently safe production technology. Precisely these preconditions are mirrored in Chowgule ABP's industrial floor coatings, and the new, innovative corrosion protection.

A motivated and competent team, innovative research and development, modern and safe production techniques and a concentration on industrial floor coatings and spray-on elastomeric systems based on polyurethane, polyurea and epoxy are the core competences of Chowgule ABP. The open and friendly working atmosphere inspires everybody and ensures high customer satisfaction.
Click Here
To Know More or to Contact the Manufacturer
Please let us know your name.
Invalid Input
Please let us know your Designation.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.
Our other Value-Added Services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Invalid Input
Invalid Input
Invalid Input
Samir Surlaker, Director, Assess Build Chem Private Limited, emphasizes the importance of a clear cover for a concrete structure since concrete as a porous material needs protection of its reinforcement. Along with the thickness (quantity) of cover, the porosity of

Read more ...

Concrete technology has come a long way since the Romans discovered the material, with a number of ingredients, which include a host of mineral and chemical admixtures, besides of course, the Portland cement, aggregates (coarse and fine), and water. These ingredients

Read more ...

Anil Kumar Pillai, GM, Ramco Cements, discusses two major softwares (Life 365 and DuraCrete), used in the industry for protection of RCC structures. The common design approach is faulty because we consider only the loading aspect, whereas the environmental aspect is equally

Read more ...

Fibre Tuff, macro synthetic polypropylene fibres, are heavy-duty synthetic fibres that are specially engineered for use as secondary reinforcements, providing excellent resistance to the post cracking capacity of concrete. They are replacing steel fibres in a range

Read more ...

Reinforced concrete design and construction practice has historically focused on the use of bonded straight or bend rebar as a method for rebar anchorage. This relies on bond integrity between the rebar and the concrete so that sufficient anchorage

Read more ...

Innovation and entrepreneurship are essential ingredients in building a successful commercial venture. The ways in which these two concepts fuel enterprise are something entrepreneur's never stop exploring. There is no doubt that innovation were

Read more ...

Alite and belite are the predominant phases of Portland cement formulation. Alite is impure tricalcium silicate (C3S) and belite is impure dicalcium silicate (C2S). The impurities are an integral part as cement is manufactured

Read more ...

Concrete is a versatile construction material and day by day its consumption is increasing globally. It is second only to water in the global consumption. No civil engineering structure is feasible without using concrete

Read more ...

The use of Graphene with concrete has been talked about and researched ever since Graphene was invented in 2010 which grabbed its inventors a Nobel prize. Nanospan is the first company in the world to break technological and commercial

Read more ...

Fosroc is the foundation of the JMH Group. It employs over 1700 employees in 17 operating companies based in Europe, the Gulf & Middle East, India, South Asia, and China. Through FGT, its trading company, it services another 50 countries

Read more ...

Established in 1983 by French expatriate entrepreneurs, the Dextra Group has a long history of growth and development, driven by strong entrepreneurship and innovation. It has diversified into three main activities: manufacturing, trading and freight forwarding

Read more ...

Jyotirmoy Mishra, Ph.D. Scholar, Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha, presents his research on the feasibility and compressive strength performance of geopolymer concrete

Read more ...

As every one ton of Cement (OPC) produced, emits 0.96 tons of CO2, there is an urgent need to promote blending materials (ex. GGBS &PSC) and screened slag, to achieve lower CO2 emissions, reduce greenhouse gas effect, reduce exploitation

Read more ...

In most of the developing countries, demand for steel for use as a reinforcing material is increasing day by day. However, when steel is in short supply, one can consider bamboo as an alternative material for reinforcement

Read more ...

There is high demand for white cement in countries with hot climates, as more heat is reflected from white concrete surfaces as compared to standard grey concrete. As a value-added product, white cement is becoming

Read more ...

Garry Martin, Director - Major Projects, Low & Bonar Construction Fibres, presents a new examination of the benefits of micro fibres in both the plastic and hardened state of concrete and their contribution to increased sustainability.

Read more ...

An integrated material and structural design strategy of strength through durability is the need of the hour since structures are designed for ductility and structural integrity. Dr. S. B. Hegde, President – Manufacturing

Read more ...

The demand for structural strengthening of ageing structures is growing rapidly in buildings, industrial structures, infrastructure projects like bridges, dams, etc. Structural Strengthening also

Read more ...

Durability and strength are two most important criteria and requirements for the long-term performance of concrete structures against weathering action, chemical attack and abrasion. Any deficiency

Read more ...

Cement is a key binder component of concrete production in the building industry. It is a complex hydraulic binder, made up of four main clinker components; alite (Ca3SiO5), belite (Ca2SiO4)

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.
Click here to subscribe.