Corrosion in reinforced concrete structures is the major cause of premature failure of infrastructures like flyovers, concrete bridges etc. The most prevalent deterioration mechanism of reinforcement corrosion involves contact of steel with depassivating anions such as chloride and sulphate or the reduction of pH in concrete as a result of carbonation of the cement binder. The crucial characteristic of corrosion mechanism is that hydrated iron oxide compounds formed due to corrosion occupy greater volume than original reactants (metallic iron). As the volume of accumulated corrosion product increases, pressure is generated within the concrete, which may ultimately exceed the tensile capacity of concrete and result in cracking, delamination and spalling.

Deioners Speciality Chemicals Pvt. Ltd. has a solution. The company is three decade–old ISO 9001:2000 and ISO 14001:2004 certified and the Licensee of Central Electro-Chemical Research Institute (CECRI), Karaikudi, Tamilnadu, a National Laboratory affiliated to CSIR, for their process of Inhibitor solution as per Patent No. 109784/67 that provides protection against corrosion to steel reinforcement bars being used in RB and RCC construction.

Anti Corrosive Treatment for Reinforcement Bar

The process is approved by Ministry of Surface Transport (MOST), Bureau of Indian Standards (BIS), CPWD, PWD and other infrastructure development agencies and well accepted by Indian Railways due to its better results, low cost and easy method of application. Deioners product is a mixed type of inhibitor, which retards anodic as well as cathodic reactions and forms impervious layer on metal surface.

The Inhibitor maintains high alkaline atmosphere around the metal surface in concrete, therefore, controls corrosion due to carbon-dioxide. It increases resistance of natural passivating film on the metal surface to breakdown by chloride. It creates adherent, thin protective film on metal surface. It scavenges the oxygen dissolved in pore solution, thus, directly reduces the corrosion rate.

The above product comes from the House of Deioners, whose other products under CLEANFLO® brand include, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Water Treatment Plants (RO Plants, DM Plants, De-alkalizers, Drinking Water Treatment Plants, Effluent Treatment Plants, Filtration Units, Pre-treatment Plants, Water Softening Plants, Ultrafilter Units, Ozonation Units, Electro/Gas Chlorinator Units, STP, ETP etc.).
Click Here
To Know More or to Contact the Manufacturer
Please let us know your name.
Invalid Input
Please let us know your Designation.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.
Our other Value-Added Services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Invalid Input
Invalid Input
Invalid Input
Innovation and entrepreneurship are essential ingredients in building a successful commercial venture. The ways in which these two concepts fuel enterprise are something entrepreneur's never stop exploring. There is no doubt that innovation were

Read more ...

Alite and belite are the predominant phases of Portland cement formulation. Alite is impure tricalcium silicate (C3S) and belite is impure dicalcium silicate (C2S). The impurities are an integral part as cement is manufactured

Read more ...

Concrete is a versatile construction material and day by day its consumption is increasing globally. It is second only to water in the global consumption. No civil engineering structure is feasible without using concrete

Read more ...

The use of Graphene with concrete has been talked about and researched ever since Graphene was invented in 2010 which grabbed its inventors a Nobel prize. Nanospan is the first company in the world to break technological and commercial

Read more ...

Fosroc is the foundation of the JMH Group. It employs over 1700 employees in 17 operating companies based in Europe, the Gulf & Middle East, India, South Asia, and China. Through FGT, its trading company, it services another 50 countries

Read more ...

Established in 1983 by French expatriate entrepreneurs, the Dextra Group has a long history of growth and development, driven by strong entrepreneurship and innovation. It has diversified into three main activities: manufacturing, trading and freight forwarding

Read more ...

Jyotirmoy Mishra, Ph.D. Scholar, Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, Odisha, presents his research on the feasibility and compressive strength performance of geopolymer concrete

Read more ...

As every one ton of Cement (OPC) produced, emits 0.96 tons of CO2, there is an urgent need to promote blending materials (ex. GGBS &PSC) and screened slag, to achieve lower CO2 emissions, reduce greenhouse gas effect, reduce exploitation

Read more ...

In most of the developing countries, demand for steel for use as a reinforcing material is increasing day by day. However, when steel is in short supply, one can consider bamboo as an alternative material for reinforcement

Read more ...

There is high demand for white cement in countries with hot climates, as more heat is reflected from white concrete surfaces as compared to standard grey concrete. As a value-added product, white cement is becoming

Read more ...

Garry Martin, Director - Major Projects, Low & Bonar Construction Fibres, presents a new examination of the benefits of micro fibres in both the plastic and hardened state of concrete and their contribution to increased sustainability.

Read more ...

An integrated material and structural design strategy of strength through durability is the need of the hour since structures are designed for ductility and structural integrity. Dr. S. B. Hegde, President – Manufacturing

Read more ...

The demand for structural strengthening of ageing structures is growing rapidly in buildings, industrial structures, infrastructure projects like bridges, dams, etc. Structural Strengthening also

Read more ...

Durability and strength are two most important criteria and requirements for the long-term performance of concrete structures against weathering action, chemical attack and abrasion. Any deficiency

Read more ...

Cement is a key binder component of concrete production in the building industry. It is a complex hydraulic binder, made up of four main clinker components; alite (Ca3SiO5), belite (Ca2SiO4)

Read more ...

FAIRMATE manufactures a complete range of construction chemicals and provides cost-effective solutions and world-class services to the Speciality Construction Chemicals Industry in alliance with leading

Read more ...

Corrosion of concrete is a major issue and many concrete structures on adverse environment have experienced unacceptable losses in terms of serviceability, ultimately requiring replacement

Read more ...

Cement is the most used industrial commodity required for development, but it is also responsible for high GHG emissions; so there is a need to create a balance between the nation’s growth and environment sustainability

Read more ...

Cement concrete is the most consumed materials on the earth next only to water. The ingredients used in preparing concrete are not sustainable. The ingredients are responsible for causing global warming. The most

Read more ...

India’s ready-mix concrete (RMC) market is projected to witness a 7-9% CAGR in the next five years. This growth is predominantly driven by the increased investments in the development of infrastructure throughout

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.