WATERPROOFING Importance of Filling Cracks

Samir Surlaker
Samir Surlaker, Director, Assess Build Chem Private Limited discusses some new joint treatments and injection systems in waterproofing.

It is a myth that waterproofing treatments can be carried out by application of single material on new concrete or existing treatments. There cannot be a single material that is right for every structure. Most of the failures in waterproofing are on account of this misconception. The only way to ensure reliable treatment is by considering the waterproofing treatment as a system. A System for Waterproofing can be defined as a combination of materials, preparation of specifications, application techniques designed by taking into considerations the requirement of the client or homeowner, which would provide efficient, reliable and long-term protection to concrete structures with minimum maintenance costs.

Waterproofing should never begin with a specific material in mind. The properties of material needed, are to be stated and then the material is to be selected as per the merit. To combat the different entry modes of water into concrete, a combined system of treatments is therefore necessary. To waterproof a structure completely, one has to address the 3 primary routes of entry into the structure, viz.
  • Pores, Capillaries and Voids in the concrete
  • Joints and Transitions
  • Cracks in the concrete cover
These can be achieved by use of:
  • Admixtures and additives to reduce the porosity and capillarity in the concrete
  • Treatment of joints, transitions and cracks using suitable coatings with reinforcement, flashing tapes and expansion joint tapes
  • The cover concrete is to be protected by appropriate surface barrier coatings
Many a times, due to age and deterioration, the effect of these treatments begin to fade, and water enters the living / usable space. It is at this time remedial waterproofing comes into play. The aim of this remedial waterproofing is to minimize the voids in the structural element [walls (basement or rooms), slab (ceiling or basement) or other structural elements. Normally a combination of this re-densification of the structural elements and joint treatment will solve most water ingress problems.

WATERPROOFING Importance of Filling CracksFigure 1: Selection of Injection / Impregnation Materials based on Crack Width

Waterproofing using Injections Types and its Applications
Injection Technologies have long been used to treat waterproofing issues. In Brief, Table 1 below gives an idea of the type of Injection materials available and the conditions these materials can be used under. The areas of application of the suitable filling materials and filling methods depend mainly on the intended application goal, the crack width, crack movement, and dampness of the cracks/crack edges/crack flanks and voids. Usually three different injection systems/methodologies are specialized to solve critical waterproofing problems:

Table 1: Materials and Crack / Void Property they can be used to Address
Crack Void Property / Materials Cement Based Epoxy PU Acrylic Gels Coatings
Surface Crack + ++     ++
Deep Crack   ++ ++ ++  
Load Transfer ++ ++ +    
Water Stoppage     ++ ++  
Moving     ++ ++ +
Non-Moving ++ ++      
Water Bearing / Damp +   ++ ++  
Dry ++ ++ ++    
+: Suitable;  ++: Most Suitable; Blank: Not Suitable
  • Grid Injection [Crack treatment or creation of a waterproof layer from the negative side]
  • Water Bar Injection/Expansion Joint Treatments/Transitions
  • Injection Hoses
WATERPROOFING Importance of Filling CracksFigure 2: Flow-Chart for Decision Making on Repair of Cracks [Ref.: Dr. V.K. Raina, Raina’s Concrete Bridge Practice: Construction, Maintenance and Rehabilitation (Second Edition)]
Selection of materials based on crack width is shown in table 1 and figure 1. Figure 2 gives a brief flowchart for Injection Strategies.

Positive Waterproofing from Negative Side, Grid Injections Low Viscosity Pus or Low Viscosity Acrylic/Methacrylate Gels
Water penetration is often caused by bad concrete compaction, honey combing or defective seals. Sometimes an interconnected void system also allows water to pass through the element and causes leakages. Grid injection is an application technique, developed from the standard crack injection process. This method is more useful where a true source of leakage is not easily traceable and a complete water stopping solution is required.

Normally if the injection is to be performed into the element, (around a cracks) a combination of polyurethanes is generally used. For very low water ingress or dampness a low foaming polyurethane (PU) can be used in isolation. In case of heavy ingress or water under pressure, a high foaming PU is used as a primary injection to stop the heavy flow, followed by a non-foaming low viscosity structural PU.

WATERPROOFING Importance of Filling Cracks

Low viscosity Acrylic/Methacrylate gels are used specifically for curtain grouting beyond the structure into the soil, when a waterproofing injection into the element is not possible or successful, due to technical, or economic reasons. The gelling of the substrate adjacent to the structure or the injection of gels into gaps in the structure creates a sealing layer, which provides a secondary waterproofing for structural components. These materials can also be used to increase the bearing capacity of soils for foundations or abutment walls. The schematic for the injection is shown in figure 3 and the practical process is shown in figure 4. The advantages of using these materials include:
  • Sealing without digging
  • Long-term tested, Systems
  • Waterproof up to 12 bars
  • High chemical resistance
  • Adjustable to soil conditions
Thus, no water can reach the leakage affected elements anymore and they have a chance to dry out fully. For a curtain injection first of all a grid of packers has to be set up. The grid should cover the highest assumed level of ground water. The distance of 30cm in-between the packers is just an average.

Treating Failed Expansion Joints/Water-bar Injection
This is a special injection application used when joint treatments in an RCC Structure fail. Water-bars are used to seal joints in moving structures against pressurized water. However, the concrete often proves to be defective in the area of the water-bar because of inadequate compaction. Water-stop Injections effectively address this defect. The materials used here are flexible methacrylate/Acrylic Gel Injections. This schematic is shown in figure 5.

Re-injectable hoses
Other critical areas with regard to the water tightness of a building or structure are expansion joints that are not sealed with water bars. Inserting injection pipes provides the possibility of sealing expansion joints effectively at a later date. The material used for such cases must display excellent flow properties. Figure 6 shows the Injection Hose System.

WATERPROOFING Importance of Filling Cracks

Injection is a proven method of sealing against pressurized water in structural renovations. The grouting of injection hoses also provides the benefit of using the advantages of injection technology in new construction specifically for the sealing of construction joints. New generation injection hoses can be injected several times, have been used successfully for construction joint sealing for many years.

They can be injected with microfine cements, acrylate gels or urethane resins. In contrast to passive sealing systems such as conventional water stops, which only seal by so-called circumference extension, active systems such as injection hoses and injection grouts can be used to strengthen possible weak points in the concrete caused by cracks or badly compacted concrete.

The technologies highlighted in the article are a first step to stopping water leakages completely. The injection treatment is usually followed by treating the transition with flashing or expansion joint tapes. This is finally protected by a coating system to enhance the durability of the waterproofing system as a whole.

In conclusion, it is important to know and identify the water ingress avenues expected in the building structure. This will help us in identifying the system that can withstand these loads over time and provide a reliable seal against water ingress into living spaces. The consequences of water/dampness entering the living space is multifold and can impact health, safety, fire-worthiness, structural durability, aesthetics as well as can destroy property. These issues need to be addressed by the waterproofing system, to improve living conditions and safety. Of course, the combination of materials, detailing and application will finally determine the success of the waterproofing system.
Click Here
To Know More / Contact The Manufacturer
Please fill in your details, we will contact you as soon as possible
Choose Title from the listPlease let us know your name.
Please let us know your Designation.
Invalid Input
Please let us know your email address.
Please let us know your City.
Please let us know your Contact Number.
Please brief your query.
Our other value-added services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Equipment & Machinery
Invalid Input
Building Products
Invalid Input
Invalid Input

Concrete Protective Liner by Russian company Hydropolymer

Concrete protective liner is a multipurpose solution for waterproofing and protection of concrete surfaces against corrosion and destruction. The product warranties long-term and reliable protection of structures Read More ...

Dr. Fixit introduces LW+Super for enhancing the efficiency of M-sand

The rapid boom in the construction industry, has tremendously given rise to the demand for sand, causing deficiency of suitable river sand in many parts of India. Besides, river mining causes imbalance in the river bed water flow, and Read More ...

Step towards building a healthy home

A home remains an individual's most cherished asset and biggest investment decision taken. It isn't merely a shelter made up of lifeless bricks and concrete. For an individual and his or her family, the home remains a highly Read More ...

Concrete Protection Coatings for Reinforced Concrete Structures

Reinforced concrete is a composite material. Its structural performance is realised only when concrete and steel act in unison during the service life of the structure. The compressive and tensile loads are carried by Read More ...
Waterproofing application Newcoat

Waterproofing Methods: Modern and Conventional Waterproofing Techniques

We Indians normally go by the adage of ‘old is gold’ and while that may hold true in some instances, it certainly is not true for old, archaic systems of waterproofing. Very often we find that a lot of innovative Read More ...
Sunanda Chemical

Effective Waterproofing for Durable Structures

No material is itself durable or non durable, it is the interaction of the material with its in service environ- ment that determines its durability - says a well known concrete technologist Larry Masters Read More ...
CETCO waterproofing

Trends in Waterproofing

In recent years expensive remedial work to correct failures in below-grade waterproofing systems has motivated owners and designers to seek high performance and reliable water-proofing solutions to prevent water Read More ...
Roof Waterproofing

Roof Waterproofing

The issue of waterproofing of roof has to be dealt with care and one must ensure that the right products are being used in the right manner. Conventionally, the concrete roof slab is covered with Brickbat Read More ...
BASF Sustainable Waterproofing Solutions

Innovative & Sustainable Waterproofing Solutions from BASF

Innovations in chemical technology solutions for civil engineering and construction are meeting demands placed by increasing complexity in structures. One such is in waterproofing, driven both by Read More ...
Hydralastic Concrete Waterproofing

Fielding The Elements: Waterproofing Systems

Waterproofing, is an important part for any construction project looking for a sustainable and well finished product, with a low maintenance life cycle. Correctly done, it offers great value to the quality of structure, Read More ...
Bathroom Wall Treatment

Waterproofing Your Bathroom

Normally the materials and components used in bathroom to make its floor, wall, architectural finishes etc. including service pipes and sanitary fittings are susceptible to natural movement and as Read More ...
Crystalline Concrete Admixture

Crystalline Technology For Concrete Waterproofing

Concrete is one of the most commonly used building and construction materials. However, due to its composition, is often susceptible to damage and deterioration from water Read More ...
chemical admixture in concrete

Commonly Used Chemical Admixtures in Concrete

The modern construction industry uses a variety of chemical admixtures in concrete, to reach desirable qualities along with a view to promote sustainability in it. ASTM C 125 defines an admixture Read More ...
Chemical Admixtures in Concrete

Chemical Admixtures in Concrete A state-of- the-art-report

Concrete, nowadays is not just mixing of cement, aggregate & water but it also comprises of chemical and mineral admixtures. It is becoming a more and more effective construction material as a result Read More ...
PVC Membrane Waterproofing

The Need for Right Waterproofing

How often do we think that why do we need to do waterproofing of a structure or which system of the many available is right? The answer to this can only be arrived at after assessing various factors related Read More ...

Waterproofing – What, Where and How?

Waterproofing is important in protecting the structure and ensuring that the structure is usable over its entire service life. The forces exerted by water are enormous and its effects Read More ...
glass fibre wrapping

Glass Fibre Wrapping Technology

Glass Fiber Wrapping can be used where concrete looses its capacity/design strength due to corrosion change in use and / or the design code demands increases in load carrying capacity. It can also Read More ...

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week

Please publish modules in offcanvas position.