Lopamudra Sengupta, Vice President (Technical services) JSW cement
"Through our wide range of future-ready, superior quality green products, we meet the evolving demands of the construction industry in India," avers Lopamudra Sengupta, Vice President (Technical services) JSW cement

Portland Slag Cement (PSC)
PSC is a blended cement confirming to IS 455:2015. It is most suitable for residential, commercial and industrial projects. At JSW Cement, we use superior quality slag produced at our steel-manufacturing plants, along with clinker and gypsum to create PSC. PSC is produced by using technologically advanced roller press and vertical roller mill.

Characteristics of PSC
  • Longer life
  • Incomparable long term strength
  • Resistant to chemical attack
  • Less heat of hydration & reduced thermal cracks
  • Better surface for painting
  • Green Product
Ordinary Portland Cement (OPC)

OPC is one of the most widely used cement variants in general concrete construction work. At JSW Cement, we manufacture high-quality OPC conforming to the IS:269-2015 standard. JSW OPC can be used on its own or it can be blended with mineral admixtures, such as fly ash and GGBS at construction sites, using a highly efficient mixture, as per requirement. JSW OPC can be used for Reinforced Cement Concrete (RCC) works and precast structures.

Characteristics of OPC
  • High early strength
  • Quick setting properties
  • Faster De-shuttering of formwork
  • Proportion flexibility (Can be blended with mineral admixtures)
  • Increased speed of construction
Green Products from the House of JSW Cement

Ground Granulated Blast Furnace Slag (GGBS)
The chemical composition of GGBS can result in the production of a unique supplementary cementetious product, which makes it perfect for structural concrete construction. It can be used as partial replacement of OPC in concrete production at Ready Mix Concrete (RMC) batching plants and site batching plants. Since it contributes towards sustainable concrete construction, GGBS is regarded as a ‘green’ building material. GGBS confirms to IS 16714:2018.

Characteristics of GGBS
  • Incomparable long term strength
  • Resistant to chemical attack
  • Longer life
  • Less heat of hydration & reduced thermal cracks
  • Proportion flexibility
  • Green Product
Concreel HD
Concreel HD confirming to IS 455: 2015 is an apt representation of JSW Cement’s vision of providing high-quality products while protecting the environment. It reduces carbon dioxide emissions, conserves natural resources & fuel, utilises industrial by-products. Its modified pore structure and superior cohesion make it ideal for strength-bearing applications such as beams, columns, slabs and foundations, and other generalised construction requirements.

Concreel HD is known as the cement with six strengths
  • Improved early and later strength
  • Superior cohesion
  • Quick setting
  • Chemical Resistance
  • Most durable in concrete mix
  • Green Product

NBM&CW October 2019

Click Here
To Know More / Contact The Manufacturer
Please fill in your details, we will contact you as soon as possible
Choose Title from the listPlease let us know your name.
Please let us know your Designation.
Invalid Input
Please let us know your email address.
Please let us know your City.
Please let us know your Contact Number.
Please brief your query.
Our other value-added services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Equipment & Machinery
Invalid Input
Building Products
Invalid Input

Impact of Ground Granulated Blast Furnace Slag on High-Performance Concrete

Concrete, being a physical mixture of cement, aggregate (sand and crushed rocks), and water, is the key construction material across the world. There is now a huge demand for infrastructure which has increased concrete Read More ...

Urban Concrete: Requisites & Remedies

There is a need for technologically advanced concrete admixtures for the ready-mix industry that meet industry codes and meet or exceed the demands of challenging construction applications and adverse placement conditions Read More ...

High Performance Concrete: Composition & Benefits

High Performance Concrete (HPC) is seeing major applications in the field of civil engineering constructions such as long-span bridges, tunnels, high-rise buildings, huge complexes, highway pavements, and more, since Read More ...

Robust Mix Proportioning of Self-Compacting Concrete Mixes - A Comparative Study

Concrete being the second largest consumed material after water needs attention towards sustainable construction with an increase in infrastructure. The world is moving towards innovative techniques and methodologies Read More ...

Structural behaviour of Geopolymer Masonry

Traditional masonry units are not sustainable and eco friendly due to consumption of fuel or cement. It is essential to find sustainable alternatives. This paper reports about preparation of geopolymer bricks, masonry Read More ...

A Study on Influence of Dilution of Alkaline to Binder Ratios on Fresh and Hardened Behaviour of Geopolymer Mortar

Geo-polymer mortar (GPM) is proven for its strength, durability and sustainability [2 & 3]; strength of GPM is a function of alkaline to binder ratio, and has an adverse effect on consistence properties of mortar Read More ...

Comparison of Reinforced and Pre-Stressed Concrete Building Frames

Comparison of Reinforced and Pre-Stressed Concrete Building Frames This article discusses pre-stressing of concrete to get lighter and slender beam sections for six different four storied concrete building frames of different spans/lengths by the application of post-tensioning Read More ...

Ready Mix Concrete in India With Quality Assurance

Ready mix concrete (RMC) is the first choice for projects requiring concrete. The term ‘ready mix’ is used to describe a process where concrete is pre-made at a plant and delivered in batches to job sites. It is a convenient Read More ...

Mechanical Properties of Geopolymer Concrete with Alternative Materials

Concrete is considered the world’s most versatile, durable and reliable construction material, next only to water. It is the most consumed material requiring large quantity of cement, fine aggregates, course aggregates Read More ...

Ferro-Sialate Geopolymer using Red Mud

Geopolymer is being used as a replacement for Portland cement for over the past three decades. The technology utilizes material rich in silica and alumina, either processed geological material or industrial byproducts Read More ...

Geopolymer Concrete - The Eco Friendly Alternate to Concrete

The name geopolymer was given by “Joseph Davidovits” in 1978. Geopolymer concrete (GPC) is an eco friendly product which uses industrial waste by-products such as fly ash (waste from thermal power plants) and ground Read More ...

Compressive strength study of Geopolymer Mortar using quarry rock dust

T. Venu Madhav, Head Department of Civil Engineering, Audisankara College of Engineering & Technology, Gudur, Andhra Pradesh, India. I.V. Ramana Reddy, Professor, Department of Civil Engineering, S.V.U. College of Engineering Read More ...

Use of Factory Made Reaction Generating Liquid (RGL - SRGPJ1) to Produce Geopolymer Concretes

Geopolymer binders, formed by alkaline activation of aluminosilicate precursors, are attracting interest as “green” cements because of their use of industrial wastes such as geothermal silicas, fly ashes and mineralogical Read More ...

Performance Evaluation of Fly ash and GGBFS Blended Self-compacting geopolymer concrete

An attempt has been made to develop Fly ash (FA) and Ground granulated blast furnace slag (GGBFS) blended self-compacting geopolymer concrete mixes with varying volume of pastes using conventionally available river sand Read More ...

Robustness of Self-Compacting Geopolymer Concrete (SCGC)

It’s widely known and has been reported on numerous occasions and in multiple journals that concrete is one of the most used construction materials in the world. With current cement production in excess Read More ...

Recent Developments in Concrete Technology

Recently, two new developments in concrete technology can have a far reaching impact on the way we consume concrete in construction. Concrete happens to be the largest in terms of weight—being about more than 5 tonnes per capita Read More ...

Sensitivity Analysis of Cable Profile of Prestressed Concrete Beams

The cable profiles for post-tensioning of concrete beams are usually designed as parabolic curves based on the eccentricity of the midpoint of the duct to the neutral axis of the beam. The end points and the midpoint of a duct are very important Read More ...
NBM&CW

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture
L&ST

Lifting & Specialized Transport

Lifting & Specialized Transport
II&TW

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week