GGBFS Replacement for High Early Strength Concrete for Precast Industry

Shivaprakash G, M-Tech Structure, Sr. Manager, Admixture and Surface Treatment, Fosroc Chemicals
Shivaprakash G, M-Tech Structure, Sr. Manager, Admixture and Surface Treatment, Fosroc Chemicals

The Precast Concrete industry is one of the thriving industries in the wake of faster development with high quality standards. The initial capital cost for precast construction is higher than for conventional concrete. The chief requirement in precast concrete is high early strength. It becomes a challenge to reduce costs, while maintaining the high early strength, durability, workability, and environmental soundness.

In the investigation work presented in this paper, mix design was developed with 25 per cent replacement of OPC with fine reactive powder (GGBFS) at water-powder ratio of 0.27 with an objective to reduce costs and make concrete green. The concrete thus designed for wet properties and compressive strength at 10 hours, 12 hours and 14 hours was to be tested and expected to meet the requirements of high early strength for precast industry.

Trial MixTrial Mix
Precast concrete is a construction product produced by casting concrete in a reusable mold or "form" which is then cured in a controlled environment, transported to the construction site and lifted into place. Previously, precast construction technology was used mainly for bridges, tunnels, flyovers, underpasses and such structures, but of late, the precast industry has gained prominence in housing, given the acute shortage in housing, rising labour and input costs, and increased emphasis on quality and timely delivery.

Precast concrete has different requirements from normal concrete in terms of workability, water-cement ratio and early strength. Within the precast industry, the rheology of concrete varies with different precast elements and structures. These variations can be brought about in the concrete with the addition of the right type and dosage of chemical admixtures. Chemical admixtures play a pivotal role in developing the concrete to required rheology.

Governing factors in precast concrete are:
  • Low water-cement ratio
  • Medium workability
  • Need for high early strength for early de-moulding to increase productivity
  • Compatibility with cement replacements
  • Compatibility with 100% crushed sand / manufactured sand.
Gaining high early strength is fundamental in the Precast industry since the casted elements of concrete need to be transported to storage or the construction site and lifted into place. This improves the efficiency of the precast plant by increasing the production cycles.

This section of the article is only available for our subscribers. Please click here to subscribe to a subscription plan to view this part of the article.

Click Here
To Know More / Contact The Manufacturer
Please fill in your details, we will contact you as soon as possible
Choose Title from the listPlease let us know your name.
Please let us know your Designation.
Invalid Input
Please let us know your email address.
Please let us know your City.
Please let us know your Contact Number.
Please brief your query.
Our other value-added services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Equipment & Machinery
Invalid Input
Building Products
Invalid Input
Invalid Input

Sustainability in Indian Cement Industry - Challenges and Avenues

Cement is the most used industrial commodity required for development, but it is also responsible for high GHG emissions; so there is a need to create a balance between the nation’s growth and environment sustainability Read More ...

Characteristics of Alternative building materials

Cement concrete is the most consumed materials on the earth next only to water. The ingredients used in preparing concrete are not sustainable. The ingredients are responsible for causing global warming. The most Read More ...

Ready Mix Concrete - Helping the Construction Industry Achieve Sustainable Development

India’s ready-mix concrete (RMC) market is projected to witness a 7-9% CAGR in the next five years. This growth is predominantly driven by the increased investments in the development of infrastructure throughout Read More ...

Impact of Ground Granulated Blast Furnace Slag on High-Performance Concrete

Concrete, being a physical mixture of cement, aggregate (sand and crushed rocks), and water, is the key construction material across the world. There is now a huge demand for infrastructure which has increased concrete Read More ...

Urban Concrete: Requisites & Remedies

There is a need for technologically advanced concrete admixtures for the ready-mix industry that meet industry codes and meet or exceed the demands of challenging construction applications and adverse placement conditions Read More ...

High Performance Concrete: Composition & Benefits

High Performance Concrete (HPC) is seeing major applications in the field of civil engineering constructions such as long-span bridges, tunnels, high-rise buildings, huge complexes, highway pavements, and more, since Read More ...

Robust Mix Proportioning of Self-Compacting Concrete Mixes - A Comparative Study

Concrete being the second largest consumed material after water needs attention towards sustainable construction with an increase in infrastructure. The world is moving towards innovative techniques and methodologies Read More ...

Structural behaviour of Geopolymer Masonry

Traditional masonry units are not sustainable and eco friendly due to consumption of fuel or cement. It is essential to find sustainable alternatives. This paper reports about preparation of geopolymer bricks, masonry Read More ...

A Study on Influence of Dilution of Alkaline to Binder Ratios on Fresh and Hardened Behaviour of Geopolymer Mortar

Geo-polymer mortar (GPM) is proven for its strength, durability and sustainability [2 & 3]; strength of GPM is a function of alkaline to binder ratio, and has an adverse effect on consistence properties of mortar Read More ...

Comparison of Reinforced and Pre-Stressed Concrete Building Frames

Comparison of Reinforced and Pre-Stressed Concrete Building Frames This article discusses pre-stressing of concrete to get lighter and slender beam sections for six different four storied concrete building frames of different spans/lengths by the application of post-tensioning Read More ...

Ready Mix Concrete in India With Quality Assurance

Ready mix concrete (RMC) is the first choice for projects requiring concrete. The term ‘ready mix’ is used to describe a process where concrete is pre-made at a plant and delivered in batches to job sites. It is a convenient Read More ...

Mechanical Properties of Geopolymer Concrete with Alternative Materials

Concrete is considered the world’s most versatile, durable and reliable construction material, next only to water. It is the most consumed material requiring large quantity of cement, fine aggregates, course aggregates Read More ...

Ferro-Sialate Geopolymer using Red Mud

Geopolymer is being used as a replacement for Portland cement for over the past three decades. The technology utilizes material rich in silica and alumina, either processed geological material or industrial byproducts Read More ...

Geopolymer Concrete - The Eco Friendly Alternate to Concrete

The name geopolymer was given by “Joseph Davidovits” in 1978. Geopolymer concrete (GPC) is an eco friendly product which uses industrial waste by-products such as fly ash (waste from thermal power plants) and ground Read More ...

Compressive strength study of Geopolymer Mortar using quarry rock dust

T. Venu Madhav, Head Department of Civil Engineering, Audisankara College of Engineering & Technology, Gudur, Andhra Pradesh, India. I.V. Ramana Reddy, Professor, Department of Civil Engineering, S.V.U. College of Engineering Read More ...

Use of Factory Made Reaction Generating Liquid (RGL - SRGPJ1) to Produce Geopolymer Concretes

Geopolymer binders, formed by alkaline activation of aluminosilicate precursors, are attracting interest as “green” cements because of their use of industrial wastes such as geothermal silicas, fly ashes and mineralogical Read More ...

Performance Evaluation of Fly ash and GGBFS Blended Self-compacting geopolymer concrete

An attempt has been made to develop Fly ash (FA) and Ground granulated blast furnace slag (GGBFS) blended self-compacting geopolymer concrete mixes with varying volume of pastes using conventionally available river sand Read More ...

Robustness of Self-Compacting Geopolymer Concrete (SCGC)

It’s widely known and has been reported on numerous occasions and in multiple journals that concrete is one of the most used construction materials in the world. With current cement production in excess Read More ...
NBM&CW

New Building Material & Construction World

New Building Material & Construction World
x (x)
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture
L&ST

Lifting & Specialized Transport

Lifting & Specialized Transport
II&TW

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week
×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.
Click here to subscribe.