Nitin Lall, Atlas Copco India

Mr. Nitin Lall, G.M. - Atlas Copco India
Mr. Nitin Lall, G.M.
Our Chakan plant has the capacity to produce one portable compressor every 15 minutes. The plant will be utilized in the future for our indigenization projects for compressors and light towers with new and advanced technology.

Sustainable productivity and safety are guaranteed features in all Atlas Copco machines, and are non-negotiable

Atlas Copco products are designed to meet the tough requirements/conditions of the Indian job sites. These products are developed using innovations through re-engineering process. We believe in consistently upgrading our product portfolio, keeping in mind the product gaps and future challenges. The element, which is the heart of the compressor, is engineered to the highest standards in the industry. To prove this, the change of element in our XRH1100 resulted in a new capacity of 1200 cfm and higher pressure to increase penetration without any additional load.

Similarly, the XRHS650/ 250-300 dual pressure compressor has the most advanced technology with maximum pressure in this range, by reducing the load with a 2-stage screw element design. This enhances its productivity and fuel efficiency. Atlas Copco machines are designed to provide sustainable productivity and maximum safety.

Our light towers ensure uninterrupted work with use of LEDs that can illuminate an area of 5,000 sqm

XA187 - Atlas Copco India
Atlas Copco’s light towers are designed to ensure that work on site, including road construction, continues uninterrupted. The newly launched HiLight V5+ light tower is equipped with advanced LED technology that can illuminate an area of approximately 5,000 sqm with an average brightness of 20 lux while consuming less than 0.7 litres of fuel per hour.

Further, our 160 - 412 cfm, portable air compressor range is ideal for delivering compressed air at the optimal flow and pressure required for road construction. Atlas Copco’s portable air compressors designed for aggregate quarrying applications also contribute significantly to the road construction segment.

Atlas Copco is one of the biggest investors in R&D

We cannot ignore that customers are also scaling up in terms of quality and service expectations, and we will continue to provide them with the time-tested Atlas Copco technology.

As leaders in innovation, we will also focus on localization and developing new technology, and promoting our existing high-quality products from our global portfolio, to enable us to offer world-class products at all times.

In 2013, Atlas Copco invested in a greenfield state-of-the-art manufacturing facility at Chakan, Pune. This investment was with an eye to our future growth in the country. The plant is three times the size of our old facility at Dapodi, Pune, and therefore, will be quite sufficient to meet our immediate as well as future demands, both locally and for some overseas markets as well.

The Chakan Plant has a capacity to produce one portable compressor in every 15 minutes. In the near future, this plant will be utilized for product indigenization. The lean manufacturing technique used here ensures priority to simple, small, and continuous improvement, which leads to a higher level of efficiency.

Our services include reconditioning of element for complete overhauling of compressor

XRHS 650 - Atlas Copco India
Our aftermarket support is a key differentiator which offers us a competitive advantage. High quality parts & spares, extended warranty programs, toll-free number to register customer queries/complaints, regular equipment health check-up and service camps, as well as a highly skilled service team, enable Atlas Copco to enhance its offering to the end-customer.

We increase the life of the equipment where the compressor is overhauled to bring it back in working condition. Also, reconditioning of element ensures a complete overhauling of the compressor. Additionally, we come up with special offers, depending on the machine model and condition.

Live product demos at site prove the equipment’s performance

Live product demonstration on sites under actual and tough conditions is a continuous process. This also helps us to gain customer’s confidence in our product range. We are constantly upgrading the product knowledge and hands-on experience of our sales and service team. Mandatory internal training of Atlas Copco’s team along with our sales and service team is conducted to build their confidence and trust in our capability and delivery.

New at Excon 2017

We are participating as a Sponsor for the second year at Excon 2017. We will be showcasing key products from our Power Technique Business Area in the Compressors and Light Tower segments, and products for light compaction & concrete, besides some new products. Our focus will be to heighten customer experience in a unique and impactful manner. The live demos will result in meaningful customer interactions, which will contribute towards increasing the flow of prospective customers.

NBM&CW December 2017

AJAX: Resilient & Resourceful

Debasis Bhattacharya, Head – Marketing, Sales & Product Support at AJAX Engineering, discusses what is making AJAX even more resilient and adaptive, as it finds ways to remain competitively strong despite the current slowdown Read More ...

Vermeer India: In the Forefront of Trenchless Technology

T. Ramesh, Country Head, Vermeer India, speaks on the widening scope of trenchless technology and solutions offered by Veermer for India’s infra development sector. Trenchless solution is used in constructing infrastructure Read More ...

INNOMAC: On a Roll

In 2019, Bangalore-based INNOMAC Engineering Industries launched a range of construction equipment such as Bar Cutting Machines, Bar Bending Machines, Suspended platforms, Hydraulic Home lifts and Building Maintenance Systems Read More ...

Louis Berger Tunnelling Through Challenges

Kshitish Nadgauda, Senior VP & MD – Asia, Louis Berger, shares information on the challenges encountered during tunnelling in the mountainous terrains of J&K and in the busy streets of Mumbai. Louis Berger has completed Read More ...

Wacker Neuson: Zero emission is the future

The Wacker Neuson Group continues to make targeted investments in research and development to expand its portfolio and position as a leader in technology in its core markets. The Group is actively working on new technologies Read More ...

Volvo Trucks: Adapting to Evolving Markets

Volvo Trucks International is enhancing its hauling capabilities, creating digitized interface in its products, and meeting the new emission regulations. Roger Alm, Executive Vice President, Volvo Group & President, Volvo Trucks Read More ...

Epiroc: Strong in India

Jerry Andersson, Managing Director, Epiroc Mining India, shares the reasons behind the company’s sustained growth in India over 60 years. Epiroc has completed 60 years in India, during which time, our machines have helped Read More ...

Ashitech to launch higher capacity asphalt batch mix plants

In a bid to target big contractors working on long stretches of the National and State highway and road projects, Gujarat-based asphalt batch mix plant manufacturer Ashitech will be launching 180-200 tph asphalt batch mix plants Read More ...

KYB Conmat - Developing tech-rich competitive products

Japanese Concrete Equipment manufacturing conglomerate, KYB Conmat has launched a new range of compact batching plants of 30-45-60 cum/hr capacities; wheel loaders of 1.2 cum and 1.6 cum; a new range of tower batch Read More ...

Tata Hitachi to scale up business with more products

Based on an evaluation of customer requirements, Tata Hitachi is introducing new, more sturdy machines; It has re-entered the backhoe loader market with its Shinraj model and plants to increase its product portfolio going forward Read More ...

PMP offers complete package of solutions to OEMs

PMP industries will continue to provide higher levels of equipments performance optimization through its integrated solutions for India and global markets. The company is offering a range of solutions for varied verticals of construction Read More ...

CASE India enters new product segment; launches its well tested 20-ton Made in India Excavator

The CNH Group is doubling its investments in India and consolidating its market presence by offering a value proposition to its customers. Neil Woodfin, VP AMEA and CE Global Alliances, CNHI International SA, and Raunak Varma Read More ...

Customer Satisfaction is at the heart of Mahindra

Vinod Sahay, CEO, Mahindra Truck and Bus Division and Mahindra Construction Equipment Division, shares the company’s plans for FY2020 keeping in view the current macro-economic factors. What growth prospects do you foresee in Read More ...

Manitou: Total Solutions Provider

From widening and upgrading its products to comprehensive aftermarket sales and support, Manitou South Asia is geared up to achieve sustained growth over the new year, says Hafeez Khan, Managing Director, Manitou South Asia. Read More ...

Liebherr places superior product offerings and services over pricing

Despite pricing being under pressure, Liebherr India will abstain from compromising on quality and safety of the product just to match the price offered by competitors. The company’s products will continue to be offered on the same Read More ...

Next Gen Compressors and Light Towers from Atlas Copco

Tony Van Herbruggen, General Manager, and S. Kumar, Business Line Manager, Atlas Copco Power Technique, Portable Air Division, share information on the company’s new technologically advanced products Read More ...

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week