Volvo IFS System– A stable world first

IFS By Per Grehn & Hanna Zakai Photography Sören Håkanlind
Volvo IFS System
A system of pistons and cylinders shakes the axle under different loads, subjecting the IFS system to extreme forces in the shake rig. Jan Zachrisson, Emil Skoog and Bror Lundgren are responsible for the tests.

The assignment was clearly defined: develop a suspension system that would make Volvo Trucks world leader in handling and comfort. Realising the target was more of a challenge. Meet the project team behind the world's first, IFS.

The truck industry is conservative when it comes to new technology. For this reason, many people experienced a feeling of "At last!" when the world's first individual front suspension (IFS) with rack-and-pinion steering for heavy-duty trucks – IFS – was presented in 2012.

"Parts of today's leaf-suspension systems with rigid axle members are based in principle on the same fundamental technology that was used in horse-drawn carriages way back in the 18th century. Separating the wheels in the front chassis from one another, so that they can work independently, is a revolution in heavy-duty trucks," explains Jan Zachrisson, the person responsible for the IFS system at Group Trucks Technology (GTT).

Before Jan Zachrisson started work on the IFS system, he was involved in upgrading the existing front chassis with air suspension for the new Volvo FH. With a background from Volvo Buses, he also had previous experience of working with individual suspension systems, as this technology has already been used for almost 30 years in the bus industry.

"Today's front chassis with leaf and air suspension systems are already so good that there isn't that much scope for developing these techniques much further. With the introduction of IFS, we are writing the first chapter in a totally new book and changing the driver's take on what it feels like to drive a truck."

How it Works:

Key Components of IFS

The challenge for the designers was to create a design with several moving components, which would function as a solid unit. This is their solution.

IFS System

The first prototypes of the system were drawn more than 10 years ago, but it was not until 2008 that the development work really began in earnest. For the past five years, Bror Lundgren and his project team comprising some 15 people have been developing the new technology.

"We were tasked with producing a design that would make Volvo's trucks best in the world when it comes to handling and comfort. As some of the work had already been done, we had a really good platform on which to base our work, but the most important development work – the transition from a concept to an industrial project – still lays ahead," explains Bror Lundgren.

It is no coincidence that Bror Lundgren, with his experience of independent suspension systems in the car industry, was chosen to lead the development work. The basic principle for Volvo Trucks' IFS system is the same for both a car and a truck – suspending the wheels independently makes the vehicle more stable and predictable on the road.

Indivisual Front Suspension

When it comes to the design, however, the systems differ. The greatest challenge facing Volvo Trucks' engineers was space and stiffness.

In a car, the stiffness in the system is created through the body structure to which the axle is attached. This kind of solution is, however, impossible on a truck for two reasons. The first is that the engine is located in the same area as the suspension. The second is that the frame structure to which the system is attached is higher in relation to the road surface. As a result, the natural stiffness in a car cannot be re-created in a truck. The solution is a design in which the moving parts of the system are held together by two sub frames (load-carrying structures) which follow the underside of the engine.

"There must be no lateral movements and so we focused very heavily on stiffening the frame structure as much as we possibly could. When we passed our rig tests and realised that the design was going to function as intended, it was a great victory," explains Bror Lundgren.

Rig tests are an important series of tests that are conducted on the world's largest shake rig at the Volvo Trucks development department in Gothenburg in Sweden.

A system of pistons and cylinders shakes the axle under different loads, subjecting the IFS system to extreme forces in the shake rig. The signals that control the shaking have been collected in the form of data from a test vehicle at the Volvo Trucks' proving ground in Hällered out side Gothenburg.

"At the proving ground, the test vehicle is subjected to a number of gruelling road tests. On the axle, there are a number of sensors that register forces and movements during the tests," explains Bror Lundgren.

By transferring these data and then using them in the shake rig, the conditions at the proving ground can be re-created. The data that are used only simulate the parts of the proving ground where the test vehicle is subjected to the heaviest loads. In this way, the tests are optimised in terms of time, as unnecessary driving and other kinds of down time can be eliminated.

"In the shake rig, we exaggerate the number of loads on the structure with the aim of ascertaining that the system is strong enough," explains Bror Lundgren.

The axle is tested hundred softime in the shake rig during a test period lasting 10 weeks.

"We have a responsibility to our customers and that is to test and keep testing until we are sure that the system is robust and ready for production," says Bror Lundgren.

“In the shake rig, we exaggerate the number of loads on the structure.”Bror Lundgren, project manager IFS

Hoda Yarmohamadi, a project engineer at GTT who has been responsible for making the calculations that determine whether each individual component complies with the rigorous quality requirements, agrees.

"All the components have to last for the whole service life. We have collaborated closely with design/construction and made on-going modifications," she says.

So, what are the greatest advantages of this new technology?

"Its handling properties are quite simply revolutionary, especially on winding roads. As a driver, you can relax in an entirely different way and this creates a totally different feeling of safety and stability compared with a conventional axle," Jan Zachrisson explains.

Volvo Trucks IFS System
Left to right: Sten Ragnhult, Olof Pawlowski, Jan Zachrisson, Katarina Axelsson, HodaYarmohamadi, Bror Lundgren, Daniel Mattsson, Stefan Axelsson, Magnus Ahlstedt In front: Ronnie Johnsson

His colleague, Stefan Axelsson, the person responsible for road performance at GTT, agrees. Drivers who cover large distances are the ones who are going to benefit most from IFS, especially when they drive on winding, swaying or narrow roads.

"The increase in roll stability is the main factor when it comes to the enhanced feeling of safety," he says.

Bror Lundgren makes a comparison between two beach balls to illustrate the difference in feeling.

"With a rigid axle with leaf or air suspension, it feels a though you are sitting on top of the beach ball and you are frequently forced to counter movements with your senses in order to maintain your balance. With an IFS, you are instead sitting inside the beach ball and have greater control of your situation. IFS has a lower roll centre than other axles and this creates an enhanced feeling of safety."

The improvement in steering wheel feedback, which is a result of the rack-and-pinion steering that is integrated in the system – a technology that is also totally unique in the truck industry – is a decisive factor when it comes to the fantastic driving characteristics.

"Compared with a conventional steering gear, rack-and-pinion steering is a more rigid steering system and this results in a more direct response. The time between thought and action is shorter and this further reinforces the feeling of control and safety," adds Jan Zachrisson.

NBMCW October 2014

Click Here
To Know More / Contact The Manufacturer
Please provide your details we will contact you as soon as possible
Please let us know your name.
Invalid Input
Please let us know your Designation.
Invalid Input
Please let us know your City.
Please let us know your State.
Please let us know your Country.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.

ExxonMobil™ Designer Lubricants enhance productivity

The infrastructure equipment in India is witnessing a new wave of global benchmarking, and so is the country's lubricant sector. Companies are waking up to the benefits of technologically superior world-class Read More ...

Kiswire looking to expand market presence in India

Crane wire manufacturer Kiswire is expanding its market presence in India with a range of premium products, along with sound service and product support. Informed Ajit Vikram Singh, Senior Manager- Sales and Sector Read More ...

Trelleborg India's innovative products and technology launched to help customers improve product efficiency and enable design engineers to better understand Sealing concepts

Trelleborg has invested substantial resources for the development of new lubrication management technologies through a deeper understanding of the functioning of hydraulic fluids within a sealing system. By designing Read More ...

Kubota's advanced engines ready for construction machines

Japanese off-highway engine manufacturer, Kubota Corporation is targeting mobile off-highway construction machinery, light towers, generators and the industrial vehicles market in India. It is especially eyeing Read More ...

Volvo Penta to 'keep it simple' for Indian OEMs ahead of BS (CEV/Trem) IV emission regulations

Volvo Penta to 'keep it simple' for Indian OEMs ahead of BS (CEV/Trem) IV emission regulations Volvo Penta will use its tried and tested Selective Catalytic Reduction (SCR) technology for Indian OEMs when Read More ...

UFI Filters Hydraulic Division showcases innovation, technology, performance

Italian company UFI Filters that started in 1971, has expanded globally over the years to become one of the world's leaders in filtration with its 16 industrial sites, 3 innovation centres and 54 commercial offices Read More ...

GS Caltex launches new high-performance products

GS Caltex unveiled new products developed by GSC R&D team with support from Indian Technology team members. Ungsok Yang, Coordinator - GS Caltex, South Korea, graced the occasion and appreciated the joint Read More ...

Engines: Manufacturers Take Innovations to Newer Highs

Driven by the requirements of OEMs, engine manufacturers are developing solutions that enable fuel efficiency, installation flexibility, ease of maintenance, and above all, enhanced ability to withstand dynamic Read More ...

SGO's technology for maximizing performance and efficiency of self-lubricating bearings

Korean company SGO is a specialist in a broad range of proprietary manufacturing technologies for maximizing the performance and efficiency of self-lubricating bearings used in construction and industrial Read More ...

GS Caltex: Fully Integrated Oil Company

GS Caltex is a Fortune 500 fully integrated oil company, with a modern refining facility located at Yeosu Complex in South Korea, and a refining capacity of 7,90,000 barrels/day. Its other facilities include Read More ...

ExxonMobil:Premium greases for bearings that can ensure effective relubrication

Rolling element bearings can be broadly categorized as Ball bearings, Cylindrical roller bearings, Spherical roller bearings, Needle roller bearings, and Tapered roller bearings. They find application in a Read More ...

Industrial Engines by Kubota Agricultural Machinery India

Kubota Agricultural Machinery India Pvt. Ltd. (KAI), the Indian subsidiary of Kubota Corporation, has announced start of sales of industrial engines for OEMs in addition to their current product portfolio of tractors Read More ...

ELGi launches oil-free air-compressor range

ELGi Equipments (BSE: 522074 NSE: ELGIEQUIP), one of India’s leading air-compressor manufacturers, recently launched its range of oil-free air-compressors at the recently held “Compressed Air Best Practices Read More ...

Atlas Copco's improved energy-efficient air compressor with better monitoring system

Atlas Copco’s ZT 90-160 air-cooled oil-free screw air compressor is available with fixed or variable speed drive and with or without an integrated dryer. The compressor elements have been adapted to work even more Read More ...

AVTEC: Customers want feature-rich products and genuine innovation in Wheel Loaders and Tippers

The right mix of features, performance, reliability, minimum downtime and low cost of ownership are driving customer choice in Wheel Loaders and Tippers. The management of innovation for large OEMs in this industry Read More ...

Getzner mitigates vibration of deep-seated foundations in heavy industrial plants

Power plants, with heavy industrial equipment such as gas turbines, hydro power turbines, motor-driven boiler feed pumps (MDBFP), compressors and fans (Forced Draft fan, Primary Air fan, etc), are the origin of noise Read More ...
NBM&CW

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture
L&ST

Lifting & Specialized Transport

Lifting & Specialized Transport
II&TW

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week