Putzmeister Presents the Largest Truck Mounted Concrete Pump

Putzmeister (PM) recently celebrated the 50thanniversary of thefoundation of the company. On this occasion, the company presented the M 70-5, the largest truck-mounted concrete pump boom in the world.

With a vertical reach of around 70m and the largest working radius ever achieved, the M-70-5 has raised the bar definitively in the concrete construction sector. The first unit is destined for an American PM customer based in California and several other orders have already been placed. The machine is fitted with large-capacity 2-cylinder piston pumps that can attain a maximum output of 200 m³/h.

To comply with the legal regulations in certain US federal states, Putzmeister has mounted the large-boom concrete pump M 70-5 on a 10-axle semitrailer, the version planned for Europeancustomers. It will be configured differently for other countries. The boom, base structure with support and outriggers, pump unit and independent power engine (330 kW Deutz 6-cylinder diesel within international emission standard TIER 3) are located on the semitrailer and of the five axes available, three are steered. The customer has selected a 370 kW Ken worth C500B (10 x 6/4) as a tractor unit. Of five axles on the tractor unit, three are driven fully suspended (cardan) and two of them are hydrostatically driven (for slow speed over rough terrain). Two axes are steered.

This semitrailer solution enabled Putzmeister to develop an extremely mobile large-boom concept with a turning radius of less than 18m suitable for use both on and off road. Thanks to this design, the world’s largest truck-mounted concrete pump is aslexible as the units much smaller. The 5-arm boom in a roll Z fold configuration has a vertical reach of around 53m and a horizontal reach of 17m, far superior to that of other machines. When operated in restricted space, the large boom can unfold fully within the footprint of the machine. During pumping operations, the tractor unit remains rigidly connected to the semitrailer and acts as a counterweight.

Putzmeister Presents the Largest Truck Mounted Concrete Pump
Three axles of the semitrailer and two axles of the tractor unit are steered. So the M 70-5 is as easy to handle as a much smaller truck mounted Concrete Pump.

Putzmeister has used special high-strength materials in the steel frame to reduce the load moment of the huge placing boom and also for the hydraulic cylinders to achieve weight-optimised construction.

Thanks to the OSS system (One Side Support), PM large-boom pump can be installed and operated safely on construction sites where space is restricted. The width of the front and the rear support is reduced to only 9.2 m during OSS operation,

In M 70-5, concrete is pumped through low-wearing, twin-wall delivery pipes (ProLine 67 HRC, DN 117). These have a life span up to 10 times longer than standard pipes (ST 52) according to experience.

The remaining equipment also clearly demonstrates that powerful Putzmeister truck-mounted concrete pumps are not only characterised by their boom length. The M 70-5 is fitted with an EBC (Ergonic Boom Control). The EBC allows the operator to control the boom more easily using a joystick, to reduce vibrations at the vertical end hose and to limit the working area i.e. to avoid dangerous zones.

The machine is fitted with an EOC (Ergonic Output Control) as standard. The EOC module helps the concrete pump save fuel during operation by automatically adjusting the engine to the maximum speed required for the current pumping output. If required, this speed can be increased or decreased at any time via the radio remote control, resulting in lower fuel consumption, less wear and reduced noise levels during pump operation.

Putzmeister Presents the Largest Truck Mounted Concrete Pump
The truck mounted concrete pump with world record boom M 70-5 introduced on Putzmeister’s 50th anniversary is another milestone in the company’s technology.

Unlike conventional hydraulic controllers, the EPS (Ergonic Pump System) on the M 70-5 controls the hydraulic drive of the concrete pump fully electronically. The simplified control hydraulics incorporate fewer components, optimize the overall pumping process and increase efficiency. In practice, this ensures a smoother “S” transfer tube changeover, less wear and reduced fuel consumption.

The Ergonic Graphic Display (EGD) on the radio remote control and the control cabinet provide the machine operator (or service engineers, if required) with information on the operating state of the machine at all times. Display parameters include the hydraulic temperature, hydraulic pressure, stroke time, engine speed, delivery pressure/limit, delivery rate/limit and operating hours to name a few.

Technical boom data of M 70-5
Vertical reach : 69.3 m
Horizontal reach : 65.1 m
Depth of reach : 51.4 m
Number of boom arms : 5
Slewing circle : 365°
Folding type : Roll Z (RZ)
Delivery line : ND 117 (2-ply, Proline 67 HRC)
Support width : 13.4 m (front) - 13.8 m (rear)
OSS support : 9.2 m (front) - 9.2 m (rear)
Overall length : approx. 21.4 m

NBMCW September 2008

Click Here
To Know More / Contact The Manufacturer
Please provide your details we will contact you as soon as possible
Please let us know your name.
Invalid Input
Please let us know your Designation.
Invalid Input
Please let us know your City.
Please let us know your State.
Please let us know your Country.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.

Malaysian developer Gamuda adds three Potain MCT 385 cranes to its fleet

Malaysian equipment rental company Megah-Sewa is adding three Potain MCT 385 cranes to its fleet for the first time. Megah Sewa is the plant and equipment subsidiary of Gamuda, the largest infrastructure development company in Malaysia Read More ...

Spartan launches new range of hoists and concreting solutions

Exports to 10 countries worldwide, 7000 plus machines on site every year, 150 plus well trained engineers and technicians, 20 national & international awards, 4000 plus satisfied customers and many more such milestones Read More ...

TIL launches two new cranes

TIL Limited, an associate sponsor at Excon 2019, showcased its expertise in material handling and crushing & screening solutions, developed over many decades both in-house and by way of alliances with global technology Read More ...

Liebherr showcases latest technology, new products and tailor-made solutions for the Indian market

Liebherr displayed its wheel loaders, crawler tractors, mobile and tower cranes and unveiled the third and largest Flat-Top crane - the NC-B 12-70. With a maximum lifting capacity of 12 tons and a maximum radius of 70 metres Read More ...

ACE unveils its latest and best-in-class products; embarks on a new journey by offering high quality Make in India products globally

Action Construction Equipment (ACE), India's leading material handling and construction equipment manufacturing company, unveiled its latest product range and shared their vision for the coming year, as it completes 25 years of Read More ...

HTL 3207: Haulotte’s most compact telehandler

Haulotte’s new compact and versatile telescopic handler HTL 3207 provides maximum efficiency on tight job sites. It offers excellent manoeuvrability and significant work autonomy under optimal conditions of safety Read More ...

Alpha: Touching new heights with innovative solutions

For the past 35 years, Alpha has been developing new solutions and evolving its product portfolio, which presently includes EOT Cranes, Goliath Cranes, Transfer Trolleys, Mobile Tower Cranes, Flat Top Tower cranes and Mobile Communication Read More ...

Manitowoc displaying best-in-class cranes at Excon 2019

Manitowoc will showcase two best-in class cranes from Potain and Grove at booth #OD69 during Excon 2019, which it will be sharing with TIL, its dealer in India for Grove mobile and Manitowoc crawler cranes. Read More ...

COMANSA presents new large-capacity Flat-Top crane 21LC1400

The tower crane manufacturer has announced the addition of a new model to its extensive range of large-capacity Flat-Top cranes: the new 21LC1400 which will come in two versions, with maximum load capacities of 50 and 66 tons Read More ...

Manitowoc introduces new National Crane NBT60L boom truck

The Manitowoc Company has launched the NBT60L, the latest addition to its National Crane boom truck product line. This 60 USt product offering now features the longest boom length in its tonnage class with 151 ft of main boom and a maximum Read More ...

Telehandler: The All-Rounder

According to industry estimates, the size of the telehandler market in India is 200~250 units. Telehandlers are pre-dominantly applied in Industries such as Infrastructure, Construction, Oil & Gas, Agriculture, Mining etc for material Read More ...

Potain MCT 85 at work on a new temple in Shirdi

Mumbai-based construction company, Bhanu Construction is using a Potain MCT 85 crane to ensure on-time construction of a new temple in the town of Shirdi, a spiritual center of India and most famous for being the home of Shirdi Sai Baba Read More ...

Speed, Accuracy, Quality & Safety for Targetted Delivery

India is a very fast developing country. To achieve the set targets for infra development, we have to adopt speed, accuracy, quality and safety in all the machines used for construction of multi-storey structures, cement, steel and power plants Read More ...

Manitowoc launches strong and versatile Potain MCT 325

Manitowoc has launched the Potain MCT 325 to further expand its popular MCT range of topless cranes. As with other cranes in the range, the MCT 325 is designed to deliver easier transport and assembly, plus high efficiency and reliability Read More ...

ACE Makes Waves with Launch of NX360° slew-cum-Pick ‘N’ Carry Crane

ACE, which believes in introducing new models in its pursuit of innovation and customer benefit, has once again expanded its product portfolio with the addition of next-generation intelligent cranes. The new NX-series of multiactivity cranes Read More ...

Yonkers Contracting Company boosts job site efficiency with Grove GRT880 on New York Route 17 road project

Yonkers Contracting Company (Yonkers) is using its recently acquired Manitowoc's Grove GRT880 on an infrastructure project along Route 17 in Harriman, New York. The project includes building a new bridge, a new interchange Read More ...

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week