WOLFFKRAN presents WOLFF 166 B US hydraulic luffing jib crane

The WOLFF 166 B US comes with the latest WOLFF CAB crane cabinThe WOLFF 166 B US comes with the latest WOLFF CAB crane cabin
After the successful introduction of WOLFF luffing and saddle jib cranes with middle to high lift capacities for the US market, WOLFFKRAN is now following suit with one of its smaller luffing jib cranes - the WOLFF 166 B. The new crane is compliant to US electrical standards and all US requirements regarding structural components.

Due to its impressive performance and an extremely compact design, the WOLFF 166 B has quickly developed into a bestselling crane for reinforced concrete structure projects on space restricted inner-city job sites since its launch in 2012. Unlike conventional luffing jib cranes with a winch driven luffing gear, it is fitted with a compact hydraulic luffing mechanism which eliminates the classical tower top and reeving of the luffing rope, making both transportation and assembly more efficient. The hydraulic luffing design also allows for a smaller out-of-service jib position, which is particularly important on constricted city construction sites.

The WOLFF 166 B US offers a maximum load capacity of 26,460 lbs (12,000 kg) in 2-fall operation and 13,230 lbs (6,000 kg) in 1-fall operation. The jib line-up ranges from 82 ft (25 m) to 180 ft (55 m) and can be extended in 16.4 ft (5 m) increments. With a 164 ft (50 m) jib it achieves a best-in-class tip load capacity of 7,270 lbs (3,350 kg).

Equipped with a powerful 60 kW hoist winch the WOLFF 166 B US offers a hook path of 1,640 ft (500 m) and line speeds of up to 377 ft/min (174 m/min) in 1-fall operation and can be built up to a free-standing tower height of 306 ft (93,2 m) due to the modular WOLFF tower system.

The hydraulic luffing cylinder with load sensing control automatically regulates the luffing speed according to the load, which results in a remarkable luffing movement from maximum to minimum jib radius in only 90 seconds with an economical 22 kW motor. The on-site connected power requirements sit at a low 91 kVA with 480 V.

Both the hydraulic cylinder and the hydraulic unit are installed in the connecting block as a compact unit. Due to this design, the hydraulic lines do not need to be disconnected for transport and assembly, saving time and cost for erection and installation. The connecting block can either be lifted onto the tower alone or as a pre-assembled unit together with the slewing frame and lower section of the tower top. The hoist winch of the WOLFF 166 B US is conveniently positioned on the jib allowing safe pre-reeving of the hoist rope on the ground prior to installation and offering easy access in case of scheduled maintenance.

The WOLFF 166 B US is fitted with the latest WOLFF CAB crane cabin providing optimal visibility and overview, a fully adjustable seat and ergonomically designed control panels providing a comfortable place of work for the operator. The cabin platform with the cabin and switch cabinet comes pre-assembled as a single unit ex-works and can be attached to the crane in just one step.

Further standard features facilitating safer and more efficient operation include the remote data transmission system WOLFF Link, an anti-collision interface for all major anti-collision systems, a working range limitation, electrical central lubrication of the slewing ring, a temperature-controlled switch cabinet with heating and ventilation, and a slip ring system in the lower part of the tower top for an optimal signal transmission.

The WOLFF 166 B US will be showcased on a WOLFF City Portal (CP 690) that adapts a standard WOLFF Cross Frame (KR 12-60) by means of adding support legs into a convenient solution allowing traffic to flow underneath the crane. WOLFFKRAN will be exhibiting in Booth F5832 on the Festival Grounds at Conexpo 2020.

Lifting & Specialized Transport, January-March 2020

Click Here
To Know More / Contact The Manufacturer
Please fill in your details, we will contact you as soon as possible
Choose Title from the listPlease let us know your name.
Please let us know your Designation.
Invalid Input
Please let us know your email address.
Please let us know your City.
Please let us know your Contact Number.
Please brief your query.
Our other value-added services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Equipment & Machinery
Invalid Input
Building Products
Invalid Input

Terex announces expansion of Franna brand in India

“Franna’s expansion in India will give the company access to the Indian mobile crane market, which is considered as one of the largest in the world and the geographic location of the Franna plant will allow us to better Read More ...

PALFINGER PCC 57.002 crawler cranes - Ideal in tight spots; Perfect for indoor jobs

The PALFINGER crawler crane PCC 57.002 maneuvers well in limited space, can shift (or “walk”) on its outriggers and can be operated electrically. It´s perfect for indoor jobs, such as the removal of escalators Read More ...

Terex brands GENIE® GR™, QS™ & GRC Vertical Mast Lifts Updated for Global Use

Genie® GR™, QS™ and GRC vertical mast lift machine specifications and performance have been updated worldwide to adopt one global slab scissor lift specification. Beginning March 2020, Genie vertical mast Read More ...

AMCS technologies trains crane operators on anti-collision systems

Four anti-collision and zoning systems DCS 61-S are installed on the various cranes of the AFPA training center at Egletons in Corrèze, France. Intended for the training of future crane operators, they will allow Read More ...

Potain introduces latest lifting technology for high-rise and home building sector

Potain has announced the launch of their latest lifting technology for two of the busiest sectors in the built environment: high-rise construction and home building. The new introductions are MRH 175 tower crane and Hup Read More ...

Godrej Material Handling launches new Bravo Electric Three-Wheel Forklift

Godrej Material Handling, a business unit of Godrej & Boyce Mfg. Co. Ltd., has announced its foray into the 3-wheel electric forklift truck segment. The country’s largest manufacturer of lift trucks, GMH has launched Read More ...

Haulotte telehandlers: stability & Safety

Haulotte’s HTL - compact, high lift and heavy load ranges – are much appreciated on construction sites because of their outstanding productivity and safety. Indeed, Haulotte telehandlers embedded with several technologies Read More ...

Maximum lifting capacity on four axles – Liebherr unveils the new LTM 1120 4.1

Liebherr has unveiled its new LTM 1120-4.1 at the CONEXPO in Las Vegas using the slogan “There’s nothing more on 4!” It is the most powerful 4-axle all-terrain crane ever built. The new 135 US ton (120 t) machine breaks into a performance Read More ...

Comansa launches 21CM750 - the largest crane manufactured at its plant in Hangzhou

Comansa launched its new 21CM750 crane at Hangzhou, which it will start manufacturing at its factory in China for the Asian market, which is looking at heavier load cranes. The launch was attended by over hundred guests, and included the leader Read More ...

Latest innovations by AMCS technologies

The company, specialized in anti-collision safety systems for lifting equipment will reveal its latest innovations on booth F101211. Visitors will have the opportunity to discover several world previews on AMCS technologies Read More ...

SINOBOOM exhibits range of high-quality access equipment

SINOBOOM has recently launched the largest articulating boom lift in the world - the GTZZ46J - which is being supplied to companies active in the petrochemical sector. On display (at its booth BL240 located in the Blue Lot) Read More ...

Haulotte exhibits its all-round expertise

Haulotte showcases new products, new technologies, and environmental issues at its booth F-6134 (Festival Lot). It will display a brand new telescopic boom for the first time to the global market, in addition with the HA61 LE (HA20 LE) Read More ...

6 new Manitowoc cranes debut

Manitowoc Cranes to unveil six new cranes to the lifting market at Booth F6144 in the new Festival Lot near the corner of Las Vegas Boulevard and Sahara Avenue. In addition to these, four other crane models that were introduced Read More ...

Comansa presents new models and technologies for North American market

Tower crane manufacturer Comansa's stand F5803 in the Festival Grounds outdoors area is showcasing its LCL310 luffing-jib crane, specifically its 18-ton maximum load version. Its maximum jib length is 60 metres, and the different Read More ...

Liebherr celebrates 50th anniversary; exhibits extensive range of latest construction & material handling equipment

Liebherr is showcasing an extensive selection of equipment at its outdoor booth #F5258 covering more than 53,000 ft2 (4,900 m²) of space for its material handlers, tower cranes, mobile and crawler cranes, hydraulic excavators Read More ...

Alpha Services

Alpha has been developing new solutions and evolving its product portfolio for the last 35 years. Our current range includes EOT Cranes, Goliath Cranes, Transfer Trolleys, Mobile Tower Cranes, Flat Top Tower Cranes and Mobile Read More ...

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week