Liebherr celebrates 50th anniversary; exhibits extensive range of latest construction & material handling equipment

Liebherr is showcasing an extensive selection of equipment at its outdoor booth #F5258 covering more than 53,000 ft2 (4,900 m²) of space for its material handlers, tower cranes, mobile and crawler cranes, hydraulic excavators, wheel loaders, crawler loaders and tractors, deep foundation machines, and a concrete pump.

liebherr lr1800 crawler craneThe new Liebherr LR 1800-1.0 crawler crane is designed to deliver maximum performance for industrial applications.
The LTM 1650-8.1 mobile crane and the LR 1800-1.0 crawler crane
These are Liebherr’s two new cranes for the American market: The LTM 1650-8.1 is designed to deliver maximum performance. The new Liebherr is the successor to the best-selling large crane of all time – almost 600 units of the LTM 1500-8.1 have been delivered to date. The successful concept of the two telescopic boom versions is continued – the LTM 1650-8.1 is available with 177 ft and 263 ft (54 and 80 m) telescopic booms.

In designing the new 8-axle crane, Liebherr focused on maximum load capacities. The LTM 1650-8.1 travels with an axle load of 26,400 lb (12 t) complete with its 177 ft (54 m) telescopic boom and the front supports. To minimize set-up time, however, the rear supports are installed as complete support box in a single hoist and connected using quick-release couplings. As with all new developments over the last few years, Liebherr can offer the LTM 1650-8.1 with a very wide range of transport weights and axle load versions to ensure cost-effective global mobility for axle loads both above and below 26,400 lb (12 t).

Outstanding lifting capacities and low-cost transport around the world are the main features of Liebherr’s new 880 US-tons (800 t) crawler crane. The LR 1800-1.0 is designed as a particularly powerful industrial crane for jobs with a luffing jib and derrick system, such as power plant construction and the petrochemicals industry. For the first time, the boom system features lattice sections with three system dimensions which can be telescoped into each other for transport.

The new LR 1800-1.0 is currently the most powerful crawler crane on the market with a basic machine 9,7 ft (3 m) wide. It is particularly rigid as a result of its increased design height. A quick connection to raise the superstructure for transport is standard. It also features the derrick ballast with VarioTray – after raising the lattice boom with the large derrick ballast, part of the ballast can be unbolted quickly and easily.

HS 8200 duty cycle crawler crane
The HS 8200 is the new Liebherr duty cycle crawler crane in the 200-ton (440,925 lb) category. Thanks to the newly designed drive system, the efficiency is increased by 15%. Load capacities are also increased by up to 15%.

The HS 8200 is one of the innovations in the HS series. The design of this duty cycle crawler crane is based on its predecessor, the proven HS 895 HD, but boasts an even better performance capacity. The elegant design combines safety, performance and economy, as well as a high level of operator comfort.

The new duty cycle crawler crane is the optimum machine for extraction work and has the capability of not only using a dragline bucket but also a grab. Like all products in this series, the HS 8200 is versatile. For deep foundation purposes, the machine can be applied for dynamic soil compaction, as well as fitted with a casing oscillator or fixed leader. When digging a shaft, the winches can even be used with the full 77,162 lb (35 t) line pull in the fourth layer. Thanks to various counterweight options, the duty cycle crawler crane also convinces in lifting operation.

A new fast-erecting crane: the 125 K
With a radius of 180 ft (55 m) and a maximum hook height of 215 ft (41,5 m), the 125 K is currently the largest fast-erecting crane on the market. The new 125 K has been specially developed for civil engineering requirements such as road traffic bridges and commercial as well as industrial building construction. The maximum lifting capacity is 17,630 lb.

340 EC-B of the new EC-B Flat-Top crane series
Liebherr presents the 340 EC-B of the new Flat-Top series. Three of the eight units are equipped with fibre rope which has a four times longer service life than steel rope and enables fibre cranes to work with a significantly higher load capacity. Further, handling is noticeably easier compared to steel rope. In addition, all cranes are optimized for assembly and offer more comfort to the crane driver. The 340 EC-B has a maximum radius of 256 ft (78 m), a maximum lifting capacity of 26,450 lb (12 t) and a maximum hock height of 301 ft (84,7 m).

liebherr 125k fast erecting craneNew: the Liebherr fast-erecting crane 125 K – currently the largest in its class on the market.

Material handler LH 30 M Industry Litronic
The powerful LH 30 M Industry Litronic, with an operating weight between 58,400 and 65,00 lb (26.5 - 29.1 t), is versatile and can operate at its maximum handling capacity in all applications. Thanks to the optimally designed engine power of 140 kW / 190 hp, high torque is available to the system for powerful and fast movements. The separate hydraulic pump in the closed slewing circuit only supplies hydraulic fluid to the swing mechanism. The maximum delivery volume is therefore always available for swiveling the uppe rcarriage, thus making possible fast and overlapping movements. The generously dimensioned cooler with large meshes also guarantees excellent cooling at full power of the machine, thus ensuring high machine availability.

Material handler LH 60 M Industry Litronic
With an operating weight between 121,300 and 134,500 lb (55 - 61 t), the LH 60 M Industry Litronic is designed for heavy-duty scrap handling. The hydraulic cab elevation, as well as rear and side area monitoring systems, allows an optimal view of the working area and the surrounding area of the machine at all times. The perfect overview gives the driver a feeling of security and ensures safe handling of the machine at all times. The foldable left arm console, as well as wide, non-slip steps, walkways and platforms, ensure easy, comfortable and safe entry and at the same time guarantee access to all maintenance points. Equipment such as cab protective grid, impact-resistant laminated safety glass and piston rod protection for cylinders are specially developed for the tough use in scrap handling and also guarantee maximum reliability in the toughest conditions.

liebherr ec-b flat top cranesThe new EC-B series from Liebherr sets new standards in terms of performance and design.

A US premier: The new generation of Liebherr crawler excavators
The Generation 8 crawler excavator series is made up of seven models ranging from 48,500 to 99,200 lb (22 to 45 t): R 922, R 924, R 926, R 930, R 934, R 938 and R 945. Two machines of the product range, R 926 and R 938, are exhibited for the first time in America at the Liebherr booth.

The highlights of the new crawler excavators include higher engine power, a heavier counterweight for higher bucket capacities, and minimal fuel consumption. A new equipment concept with a modified piece at the top of the boom is an innovative feature. This leads to better performance and equipment forces with reduced operating weight of the machine. Another feature is the optimized load curve, which yields reduced fuel consumption. These machines have been specially designed to provide extra comfort and safety for the operator, as well as optimum ergonomics and performance on the job site.

North American premiere
On display are Liebherr’s four-wheel loaders that include an L 566 XPower® with power-split travel drive; the largest Liebherr wheel loader - the 71,870 lb (32,6 t) L 586 XPower® with a power split XPower® drive to deliver high performance and enormous fuel savings. The L 538 represents the Liebherr medium-sized wheel loader range. For customers from countries in Central and South America, Liebherr is showing the L 550 wheel loader. It is a representative of the separate wheel loader series for less emission-regulated markets.

liebherr hs8200 duty cycle crawler craneFirst assignment of the HS 8200 in southern Germany.

Pumps
Construction machines are exposed to high dynamic loads and use corresponding high pressures. For such conditions, Liebherr is presenting the hydraulic double motor DMVA D 165-165, the hydraulic pump DPVG 140 as well as size 85 of the series 20 of the LH30VO medium pressure pump. The latter pump can be used to power, for example, the equipment, ventilation systems or steering of the machines. The 110 D-K crawler concrete pump with a six-cylinder engine complies with the Tier 4f emissions standard and with current environmental regulations.

In-line Engine
Among the latest development is the D976, Liebherr’s biggest and most powerful in-line engine with a displacement of 1,098 in³ and a power range from 469 to 843 hp (350 to 620 kW) in its standard version.

Bearings
An upgraded bearings portfolio is being introduced this year, with the super-size seamless slewing bearings of up to 31,17 ft helps to convey and rotate enormous loads. And the new planetary gearbox series on display features high power density, minimal weight and reduced installation space and is ideal for use in lifting and driving applications, or as a drive for undercarriages and crawler vehicles.

liebherr ltm1650 mobile craneThe Liebherr LTM 1650-8.1 mobile crane is designed to deliver maximum performance.

Liebherr A 920 Litronic wheeled excavator
It has an operating weight of 40,300 - 47,000 lb (18.3 – 21.3 t) and an engine output of 129 kW / 175 hp. It is particularly suitable for road, canal and pipeline construction as well as for classic earthmoving work and is characterized by high mobility and versatility.

Liebherr A 922 Rail Litronic rail-road excavator: It has an operating weight between 45,000 and 51,600 lb (20.4 – 23.4 t) and an engine power of 120 kW / 163 hp. The excavator can be operated as a dual purpose machine either on the road or on railway tracks.

New generation 8 crawler dozers
Liebherr’s latest Generation 8 dozers with the new PR 736 are equipped with many features that enhance operator comfort, excellent grading characteristics and new standard grading systems. It is powered by a newly developed Liebherr diesel engine belonging to the EVO series (160 kW / 217 hp). It meets emission level Tier 4f.

Staying connected at Conexpo
To experience all Liebherr has to offer before, during and after Conexpo, the company will again offer a free digital app, through which visitors can view the latest show-related news and events, get detailed information about the products. The app is available for Apple and Android users. Its micro website, Liebherr.com/Conexpo, will also offer up to date information about the show.

Lifting & Specialized Transport, January-March 2020

Click Here
To Know More / Contact The Manufacturer
Please provide your details we will contact you as soon as possible
Please let us know your name.
Invalid Input
Please let us know your Designation.
Invalid Input
Please let us know your City.
Please let us know your State.
Please let us know your Country.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.

Comansa launches 21CM750 - the largest crane manufactured at its plant in Hangzhou

Comansa launched its new 21CM750 crane at Hangzhou, which it will start manufacturing at its factory in China for the Asian market, which is looking at heavier load cranes. The launch was attended by over hundred guests, and included the leader Read More ...

Latest innovations by AMCS technologies

The company, specialized in anti-collision safety systems for lifting equipment will reveal its latest innovations on booth F101211. Visitors will have the opportunity to discover several world previews on AMCS technologies Read More ...

SINOBOOM exhibits range of high-quality access equipment

SINOBOOM has recently launched the largest articulating boom lift in the world - the GTZZ46J - which is being supplied to companies active in the petrochemical sector. On display (at its booth BL240 located in the Blue Lot) Read More ...

WOLFFKRAN presents WOLFF 166 B US hydraulic luffing jib crane

After the successful introduction of WOLFF luffing and saddle jib cranes with middle to high lift capacities for the US market, WOLFFKRAN is now following suit with one of its smaller luffing jib cranes - the WOLFF 166 B Read More ...

Haulotte exhibits its all-round expertise

Haulotte showcases new products, new technologies, and environmental issues at its booth F-6134 (Festival Lot). It will display a brand new telescopic boom for the first time to the global market, in addition with the HA61 LE (HA20 LE) Read More ...

6 new Manitowoc cranes debut

Manitowoc Cranes to unveil six new cranes to the lifting market at Booth F6144 in the new Festival Lot near the corner of Las Vegas Boulevard and Sahara Avenue. In addition to these, four other crane models that were introduced Read More ...

Comansa presents new models and technologies for North American market

Tower crane manufacturer Comansa's stand F5803 in the Festival Grounds outdoors area is showcasing its LCL310 luffing-jib crane, specifically its 18-ton maximum load version. Its maximum jib length is 60 metres, and the different Read More ...

Alpha Services

Alpha has been developing new solutions and evolving its product portfolio for the last 35 years. Our current range includes EOT Cranes, Goliath Cranes, Transfer Trolleys, Mobile Tower Cranes, Flat Top Tower Cranes and Mobile Read More ...

Kiswire to broaden market presence in CRANE business

South Korean specialty high carbon steel wire products manufacturer ‘Kiswire’ is expanding its business in India, to meet the specialized wire rope requirements used in the new cranes. Not only are they OEM suppliers to many international Read More ...

ACE Tower Cranes riding the Prefabrication Wave in India

Prefabrication Construction is playing a vital role in building the infrastructure of India. Globally, this innovative concept has been significantly adopted by the Construction Industry, with Burj Khalifa and Sydney Read More ...

Escorts’s CT Smart 15 - India’s safest and compact Pick-n-Carry Crane

Escorts Construction Equipment (ECE), the construction and material handling equipment manufacturing arm of Escorts Limited has developed India’s safest and compact Pick-n-Carry Crane - CT Smart 15 crane which has unique anti-toppling Read More ...

Rough Terrain Cranes - Moving Towards Higher Capacities

The infrastructure sector is witnessing many complex and huge projects that require heavy lifting jobs. In view of this, rough terrain crane manufacturers are coming up with products that have higher lifting capacities and more Read More ...

Malaysian developer Gamuda adds three Potain MCT 385 cranes to its fleet

Malaysian equipment rental company Megah-Sewa is adding three Potain MCT 385 cranes to its fleet for the first time. Megah Sewa is the plant and equipment subsidiary of Gamuda, the largest infrastructure development company in Malaysia Read More ...

Spartan launches new range of hoists and concreting solutions

Exports to 10 countries worldwide, 7000 plus machines on site every year, 150 plus well trained engineers and technicians, 20 national & international awards, 4000 plus satisfied customers and many more such milestones Read More ...

TIL launches two new cranes

TIL Limited, an associate sponsor at Excon 2019, showcased its expertise in material handling and crushing & screening solutions, developed over many decades both in-house and by way of alliances with global technology Read More ...

Liebherr showcases latest technology, new products and tailor-made solutions for the Indian market

Liebherr displayed its wheel loaders, crawler tractors, mobile and tower cranes and unveiled the third and largest Flat-Top crane - the NC-B 12-70. With a maximum lifting capacity of 12 tons and a maximum radius of 70 metres Read More ...
NBM&CW

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture
L&ST

Lifting & Specialized Transport

Lifting & Specialized Transport
II&TW

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week