Polymer technology specialist Trelleborg is aiming at lower maintenance and higher equipment lifetime with its solutions, like, its new, innovative solution HiMod® Strut Bearing, which will help replace the metal injection molded machine parts - without compromising the load requirements. The solution will greatly benefit Dumptruck and related equipment.

Trelleborg offers solutions to lower equipment downtime and lesser maintenance

An innovative solution for rigid dump trucks and Defence Truck, which transports crushed aggregates and mineral ores, is Roto L & SG. It is fitted on the axle of the rigid dump truck and a sensor-based system will continuously check the tire pressure of the truck while in motion (both in loaded and empty condition). Real time monitoring of tire pressure will not only help in reducing fuel consumption but also to re-pressurize the tires as and when needed for safety during operation.

The Turcon® Roto L seal is the first ever active seal and is engineered to extend seal life on axle systems. Uniquely, it only seals when sealing is required. This reduces friction to lower fuel consumption and there by conserves energy. It is engineered to extend the lifetime of Central Tire Inflation Systems by lowering friction.

The new sealing principle combines known and required functionalities into one component. Through an intelligent combination of materials and design, it is even possible to decisively improve known areas of conflict.

Ranjan Sen, Managing Director, Trelleborg India
Ranjan Sen, Managing Director, Trelleborg India, informs, “One of the key benefits of Roto SG is that it will help reduce downtime of vehicles, especially those working in removal of overburden. Our aim is to ensure optimum equipment availability to increase productivity and profitability of our customers. We sell our products directly to OEMs and also customize them as per their requirements.”

The company has also introduced the Nexus metal face seal for vehicles working with very fast duty cycles, like excavators. The Nexus metal face seal has a heavy chrome casting which completely prevents contamination of the hydraulic system. The seal can be used in gearboxes, transmission systems, and also in the PTO system in machines like concrete transit mixers, for preventing dust and dirt.
Hydro Dyne's Hydraulic Equipment For Construction Industry
In the dynamic world of construction, where efficiency and precision are paramount, the role of hydraulic power is nothing short of transformative. Hydro Dyne, with over 40 years of expertise in hydraulic equipment manufacturing, stands as

Read more ...

Mother India Forming's components for operator cabins and formworks
Mother India Forming demonstrated its commitment to sustainability and energy efficiency in its operations and also by localizing components at Excon. The company actively engages in sustainable manufacturing practices and is focusing

Read more ...

Bonfiglioli's Gearboxes For Excavators & Winch Drives For Tower Cranes
Italian gearbox and drives manufacturing major, Bonfiglioli, displayed its new 710 C gearbox for 20-ton track excavators and its 800 series winch drives for tower cranes. Informed Kennady V Kaippally, Country Manager, Bonfiglioli

Read more ...

Dana's Drivetrain Solutions & products for future of Electrification
Dana Incorporated, a global leader in delivering mobile drivetrain and motion solutions, showcased its innovative products and unveiled customized solutions supporting both conventional and electrified power sources.

Read more ...

COBO's Interactive Comfort seat, Steering Column Kit & tech solutions
COBO presented several product families, including electronic, electrom- echanical, fully integrated systems, mechanical (seats and steering columns assembly), instrument clusters, and power electronics. The seat, named ICS exemplified

Read more ...

Bondioli and Pavesi's Open & Close Circuit Pumps, Motor, Cooler & Kits
Bondioli & Pavesi displayed its products made in Italy, as well as products made in India. These included open circuit axial pumps, close circuit pumps, motors, and coolers and kits for specific-purpose machines.

Read more ...

Dantal Hydraulics' Hydraulic Cylinders & green technologies
A key highlight of Dantal Hydraulics’ display was the hydraulic cylinders featuring piston rods that are plated at the company’s chrome plating plant. Informed Sanjay Talwar, Managing Director, Dantal Hydraulics

Read more ...

Gayatri's Advanced Asphalt Batch Mix Control System
Gujarat company, Gayatri Control & Automation, introduced its asphalt batch mix control system with an advanced controller for asphalt applications. Its key advantage is the inclusion of more than 15 types...

Read more ...

Siddhi Equipment's Metal Detectors for Crushers & Screens
Metal detector manufacturer, Siddhi Equipments’ stone crushers metal detectors are designed to facilitate higher productivity of the crushing units by reducing their maintenance requirements...

Read more ...

Kennametal's drilling, road rehabilitation & wear protection solutions
Kennametal India Limited displayed a comprehensive range of innovative foundation drilling, road rehabilitation, mining, and wear protection solutions. On display was the company’s Next-Gen Road King™...

Read more ...

Wipro's Hydraulics, TipMatics for tipper truck, actuator & scissor lift
Wipro Infrastructure Engineering, a diverse industrial engineering business and a leading global hydraulics player, showcased products and solutions that included Wipro Hydraulics...

Read more ...

PMC: Hydraulic pumps, motors, valves
PMC, a global leader in hydraulic device technologies for the last 50 years, is driving the success of its clients in a wide range of heavy construction machinery, farm machinery, special vehicles, ships, power plants...

Read more ...

INGECO: 47 Years of Experience in Manufacturing Custom-made Geared Boxes
Manufactured with the latest technologies, Ingeco gearboxes help construction equipment manufacturers achieve longer duty cycles, longer maintenance intervals, fewer breakdowns, and higher reliability. Ingeco is a supplier of custom-built

Read more ...

JK Fenner: Providing a One-Stop Solution for Power Transmission Products, Industrial Solutions & Automation Systems
JK Fenner, a renowned name in the design and manufacture of power transmission products, industrial solutions, and automation systems for the automotive and construction industries, is meeting the needs of major sectors like Steel, Cement

Read more ...

Dinamic Oil: Offering high quality, energy efficient, customized Hoists and Planetary Gearboxes
Dinamic Oil, an Italian company operating in India since 2009, specializes in planetary gearboxes and hoisting solutions for the construction, industrial, and marine sectors. Their India operations offer complete solutions from design to execution, supporting

Read more ...

COBO’s ECO HE instrument cluster comes with improved features and user experience
COBO's ECO HE instrument cluster is the ultimate evolution of the already impressive "ECO" line, with four different variants to choose from. This top-of-the-line ECO HE instrument cluster boasts a multitude of enhancements, such as a 3.5" TFT display

Read more ...

Burner India’s Biomass Pellet Burners & Stoves reduce carbon emission
Burner India, manufacturer of oil, gas, and biogas fired burners, biomass burners, and thermic fluid heating systems, has been serving the infrastructure industry since 2001. “We are catering to different categories of plants like concrete

Read more ...

INGECO: 47 Years of Experience in Manufacturing Custom-Made Gears
Manufactured with the latest technologies, Ingeco gearboxes help construction equipment manufacturers achieve longer duty cycles, longer maintenance intervals, fewer breakdowns, and higher reliability. Ingeco is a supplier of custom-built

Read more ...

Yanmar introduces e-powertrain strategy
Yanmar’s electrification strategy for off-road vehicles and OEM equipment is aimed at a sustainable future for all. The company is on its way to transform to new-energy sources with new products and alternative fuel technologies in all

Read more ...

MTA displays Control Panels & Smart Electric Center for Off-highway Applications
MTA, a multinational company operating in the global automotive sector through 3 Business Units – Electric, Electronic and Power Electronic – showcased a Switch Control Panel and a Light Control Panel. The two keypads, both with

Read more ...