WIRTGEN’S 220 SM 3.8 surface miner selectively mines raw materials up to a cutting depth of 350 mm and a uniaxial compressive strength of 35 MPa. With its 3.8m wide cutting drum designed specifically for soft-rock mining, the compact surface miner achieves maximum productivity at low operating costs and is perfect for use in small to large mining operations.

Wirtgen 220 SM 3.8High daily outputs in windrows are no problem for the new Wirtgen 220 SM 3.8. With a cutting width of 3.8 m and a cutting depth of up to 350 mm, the 708 kW surface miner is perfect for soft-rock mining in operations of all sizes.

Efficient and Environmentally Sustainable Raw Material Extraction
Selective extraction makes it possible to mine raw materials with a high level of purity. The material, which is extracted in an environment-friendly manner without drilling or blasting, is continuously deposited behind the machine in a windrow and then loaded onto trucks with other equipment. Refraining from drilling and blasting makes it possible to conduct efficient mining operations close to industrial sites and other infrastructure such as pipelines or high-voltage power lines, which results in optimized exploitation of the deposit.

Powerful Cutting Drum Unit
The cutting drum is designed specifically for demanding windrow applications in soft rock, such as coal or salt. Maximum cutting performance combined with the ideal use of engine power and low specific fuel consumption allows raw materials to be mined in an extremely cost-effective process. Six different adjustable cutting drum speeds ensure that the machine can be perfectly adapted to the material being extracted. This leads to a significant reduction in pick wear, minimal diesel consumption, and increased productivity, which translate into an impressive daily output and low cost per ton of extracted material.

Wirtgen 220 The large-capacity operator cabin with an optional cameraThe large-capacity operator cabin with an optional camera system gives the operator an excellent view of the machine and the surrounding work area. The generously sized windows also give a clear view of the cutting edge.

Reliable Operation and Safety are Top Priorities
In surface mining, the continuous availability of the machine and its safe operation are of critical importance. This is why the surface miner’s components are designed to achieve a long service life, even under extreme conditions. For example, filters in all circuits and a pressurized hydraulic reservoir ensure maximum purity in the hydraulic system and, as a result, safe operations. The clean oil, in turn, prolongs the service life of the downstream components and thus increases the availability of the machine.

Spacious ROPS/FOPS Operator Cabin
The 220 SM 3.8 also meets occupational safety requirements in surface mining with a standard-equipped ROPS/FOPS operator’s cabin. The cabin features additional soundproofing and vibration isolation, allowing the operator to work for several hours without the risk of fatigue. The ergonomically designed and clearly arranged controls are integrated into the armrests of the driver’s seat, and all the machine’s key functions are logically incorporated into the multifunctional joysticks. This means that the operator can operate the machine intuitively in just a few steps and fully concentrate on high-precision mining. The state-of-the-art, fully air-conditioned, large-capacity cabin also features generously sized windows, giving the operator a direct view of the cutting edge and with it, the results of the work done.

High-Precision Leveling with LEVEL PRO PLUS
The LEVEL PRO PLUS leveling system has a proven track record in road construction and mining and is intuitive and easy to operate. A flat or inclined formation level can be created with absolute precision using the side plate scanning and the cross-slope sensor. The machine is also ready to be equipped with GPS or laser control.
Click Here
To Know More or to Contact the Manufacturer
Please let us know your name.
Invalid Input
Please let us know your Designation.
Please let us know your Contact Number.
Please let us know your email address.
Please brief your query.
Our other Value-Added Services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Invalid Input
Invalid Input
Invalid Input
The total waste generated by any country is calculated on the basis of per capita waste generation. As per the latest estimate by the Ministry of Environment, Forest and Climate change, more than one lakh of waste per day is generated in India

Read more ...

With the successful installation of a Combo X70 at Kotputli, Rajasthan, CDE Asia has gained the immense satisfaction of initiating a client’s successful journey into the construction industry

Read more ...

In September 2020, CDE Asia broke new ground in quartz washing when it installed a customized Combo plant (Combo Exo) to help its client Goyal Group of Minerals achieve economies of cost and control over their quartz

Read more ...

ERR, a leading aggregate manufacturer and supplier in Warangal with 15 years’ experience in quarrying, has recently installed a Combo X70 plant of CDE Asia to convert low-grade waste to M-Sand.

Read more ...

Bhutan’s first Combo X70 manufactured sand plant was commissioned on 25th May 2021 with resounding success for State Mining Corporation Limited (SMCL) - the first state-owned mining company in the country

Read more ...

Lakshmi Road Metal Industries, located in the Chikballapur district of Karnataka, has long felt the need to perfect the production of Manufactured Sand to meet the exacting industry standards

Read more ...

A joint venture of Italy’s Cooperativa Muratori e Cementisti (CMC) di Ravenna, Thai company Ital Thai and Vietnam’s Song Da Corporation is using a 1,500 mtph ICM - Terex MPS plant to produce aggregates for a 4 million

Read more ...

Terex MPS is proud to introduce new options for the popular MHS6203 and MHS8203 screen modules, including a wash plant option and a feed box and support structure. The screen modules feature the proven TSV Series

Read more ...

The world is increasingly witnessing a strategic shift by quarry and mine operators. They recognise that to gain an edge over their competitor they need to offer the best quality sand to their customers as the

Read more ...

India is bestowed with large reserves of Iron Ore and is the 2nd largest producer of Steel across the globe. India’s total Iron Ore production for the year CY19 was 231 Million MTs, which enabled 90% (111 million MTs)

Read more ...

Terex Finlay rolled out the first production unit of its fourth generation 883+ heavy duty screener, which was built at the state-of-the-art Terex Materials Processing facility in Hosur. The Terex Finlay

Read more ...

The rising demand for Manufactured Sand as a sustainable and superior substitute for riverine sand is heartening, especially since it indicates that the world is waking up to the problem of natural sand shortages

Read more ...

With work on infra projects picking up pace and a renewed thrust on road construction, the crushing & screening industry is on revival mode. As per the projections for FY 2021-22, the scenario is positive with the expected

Read more ...

The NEW Terex Finlay 883 Spaleck is the ultimate in mobile screening and separation technology. This new product offering is the re‎sult of a joint partnership between Terex Finlay, pioneers in mobile tracked processing

Read more ...

The Combo sand processing plant from CDE, has a patented eco-friendly technology to produce superior quality M-Sand. It combines feeding, grading, washing, water recycling and stockpiling

Read more ...

Customers all over the world love the Powerscreen Warrior 600 compact screen. They tell us about super-aggressive screening, excellent tonnages and compact for easy movement. The Powerscreen® Warrior 600 has been

Read more ...

In order to scientifically channel the huge Construction and Demolition Waste generated by the city of Surat, Surat Green Precast Private Limited (SGPPL), in 2019, set up a state-of-the-art C&D Waste Recycling plant

Read more ...

In the current challenging environment, adopting digital solutions has become a key strategy of industries across the globe. CII’s virtual exhibition platform is addressing business continuity needs by showcasing

Read more ...

These are tough and challenging times for the Construction Industry as there is a general nervousness around resumption of businesses, safety of its people and machines, the availability of service support, and the

Read more ...

CDE Asia, a leader in inventing wet processing equipment, has launched its new multiple-product manufactured sand plant, christened as Combo Multi. The demand for sand and aggregate is growing exponentially with rapid urbanisation

Read more ...

×
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.