Argenio Antao, COO - Colliers International India
Argenio Antao, COO - Colliers International India
The Construction Industry has undergone revolutionising changes in the last decade by embracing technological advancements. New-age construction methods have become highly efficient to ensure faster delivery time and cost effectiveness.

From construction drawings in blueprints during the 19th century to its gradual shift to whiteprint and now with 2D and 3D CAD drawings, the industry has witnessed a digital transformation in its methods and practices. In fact, the present-day Building Information Modelling (BIM), 4D Scheduling, and 5D cost modelling mark the beginning of a new era of construction technology. The 4D project management software simulation of construction progress tracks and validates the process including temporary works, traffic management, construction work tasks, as well as coordinates supplies and progress delivery to optimise project plans much ahead of time.

Application of Robotics has also made a major difference in the industry and in making the lives of the construction industry workers safer and simpler. With the help of Artificial Intelligence, Automated Rovers can now provide jobsite status information, monitor sites autonomously and feed data back to the predictive analytics systems. Nowadays, the smart devices, wearable construction technology, sensors and on-site cameras, drones, advanced GPS linked to the construction management software can provide comprehensive information of building progress and real-time status reporting.

New and Emerging Technologies in Construction Industry

The industry has also adopted prefabrication technology, available at different budgets for assured quality of construction and speedy completion. Formworks have evolved from conventional timber to MIVAN and Tunnel formworks, which assure high quality control measures and save time significantly. With the increased awareness about environment and sustainable development, construction industry is also incorporating eco-friendly practices. Green and innovative materials are being preferred as these are recyclable, reusable, non-toxic, and they engender little pollution. The practice of using air cleaning bricks on the outside of the building is prevalent as it funnels air into an internal cyclone filtration section separating heavy elements and drops them down into a hopper at the base of the wall, pulling clean air into the building.

Building integrated photovoltaic glazing helps the building generate its own electricity by turning the whole building envelope into a solar panel. Kinetic footfall in road pavements and footpaths is a sustainable energy source used for generating electricity. Self-healing concrete makes it cost efficient due to the low cost of maintenance, durability and the long lifespan. In short, technology is giving us a way to capture much of that experience and bridge the gap in knowledge.

However, despite these innovations, project execution faces major challenges due to slow adoption of the new technologies, non-availability of skilled labourers and material resources, improper risk management techniques, improper planning, changes in design, coordination issues in site management, and lack of budgetary control.

Therefore, implementation of latest technology has an additional cost factor involved as it is imperative to develop training programs for unskilled labourers, outsource labour hire requirements, and provide safe and healthy work environment to address the manpower scarcity issues. However, use of predictive analytics reduces risks associated with the workforce as the application of BIM in design coordination avoids errors.

As we adopt new technologies for better efficiency, it is necessary to engage in active value engineering techniques and proper material management. Value engineering methodology should analyse the function of the goods and services, not compromising on the user requirements, to obtain the required functions at the lowest total cost (both CAPEX and OPEX). This can include alterations in design, adding efficiencies to the production process, removal of unnecessary costs, and sourcing from lower-cost suppliers without negatively impacting customer requirements. In addition to this, site-based teams also need to focus on cost reduction techniques.

By controlling procurement, carrying cost can reduce total project cost and fast track project completion. Inventory categorisation, resource levelling and smoothening assure material usage at an optimum refined level, so that the storage cost can be eliminated. Enterprise Resource Planning (ERP) with analytics using data from various construction processes allows manufacturers to proactively manage operations and prevent disruptions and delays.

Even though the industry has witnessed many disruptive changes over the years, it has been relatively hesitant to implement these practices and technologies aggressively. Although these are established methodologies by now, the industry still trudges along with the traditional methods. At the pace technology is advancing and being adopted across various segments of our lives, the construction industry too needs to be highly tech driven to add value to the customer and operate with profitability.
Click Here
To Know More / Contact The Manufacturer
Please fill in your details, we will contact you as soon as possible
Choose Title from the listPlease let us know your name.
Please let us know your Designation.
Invalid Input
Please let us know your email address.
Please let us know your City.
Please let us know your Contact Number.
Please brief your query.
Our other value-added services:

To receive updates through e-mail on Products, New Technologies & Equipment, please select the Product Category(s) you are interested in and click 'Submit'. This will help you save time plus you will get the best price quotations from many manufacturers, which you can then evaluate and negotiate.

Equipment & Machinery
Invalid Input
Building Products
Invalid Input
Invalid Input

Future of Thermal Power Plants

In India, the major source of power generation is thermal energy. Over 65% of electric power is made by thermal plants in India. The country has a huge store of coal (about 170 billion tons) – the fifth largest in the world Read More ...

Recycled C&D Waste Materials

Large construction activities were taken up after Independence in India. These structures have outlived their lives now and are under demolition. From such demolitions, a considerable quantity of Construction Read More ...

Future of Thermal Power Plants

In India, the major source of power generation is thermal energy. Over 65% of electric power is made by thermal plants in India. The country has a huge store of coal (about 170 billion tons) – the fifth largest in the world Read More ...

Implications of the Proposed Shear Design Provisions in the Indian Code IS 456

Most of the provisions in the Indian code, IS 456:2000, are based on the experimental investigations on concrete with strengths less than M40. Hence, recently, new equations for the shear strength of RC beams have been Read More ...

Revision of Indian Standard Codes of Civil Engineering – Prospects and Necessity

It is not only necessary but rather indispensable for civil engineers and professionals engaged in civil engineering practices to have a practical understanding of the modification and changes in the Indian standard Read More ...

Era of Nanotechnology

Nanotechnology is a revolutionary step in the field of construction which deals with the synthesis, characterization, utilization and analysis of materials at the nano scale. These can be utilized to improve the mechanical properties Read More ...

Digital Solutions for Sanitation Related Infrastructure

Clean India Campaign/Initiative launched in 2014 to end open defecation with a focused approach on strengthening sanitation-related infrastructure is set to change the public sanitation scenario in the country. Strengthening Read More ...

Experimental analysis for evaluation of shear properties of High Strength SFRC beams

The configuration of bond of high strength concrete is rather unlike to normal concrete and is a prime concern in this context. The behavior of sudden failure of high strength concrete under shear force is perhaps due to the aggregate Read More ...

Emerging Alternative Cements for Construction Industry

Ordinary Portland Cement (OPC) has been ruling the cement-based construction industry since 18th century i.e. start of its commercial production. In last two decades, the manufacturing rate has grown from 1.5 billion metric tonnes Read More ...

CPWD Installs Solar Trees for Net Energy Plus Campus

Government of India launched solar mission in 2010 with the target of deploying 20,000 MW of grid connected solar power by 2022 which was revised to 1,00,000 MW in 2015. Revised target comprises of 40 GW Rooftop and 60 GW through Read More ...

Sustainable Construction at No Extra Cost

The Paper is about the Sustainable Construction which doesn’t cost anything extra infact it has overall saving and less costlier with many Eco-friendly Benefits. The Paper revolve about the Cost associated with the Sustainable Read More ...

Effect of Load Obliquity on Pullout Capacity of Granular Anchor Pile in Cohesionless Soil

In the present study, the experimental investigations were carried out to compare the vertical and oblique behavior of Granular Anchor Pile (GAP) and Group Piles of 2 & 4 GAP in cohesionless soil. A model testing program was designed Read More ...

Fire Safety and its Management

FIRE SAFETY is defined as the set of practices which are intended to decrease the destruction caused by fire. It also refers to planning and infrastructure design aimed at reducing the risk of fire or impeding the spread of a fire Read More ...

Brick Kilns and their Effect on Environment

Bricks are traditional building materials which hold a lot of importance in Indian architecture. Brick manufacture in India and also in some parts of the world still use the traditional firing technique. After China, India is the second Read More ...

Building Materials, Testing & Sustainability

This comprehensive textbook by well-known and award-winning author, design consultant, and researcher, Dr, N Subramanian, is an invaluable source of knowledge for engineering students, architects, consultants, researchers, teachers, and all those Read More ...

Turning Plastic Waste into Eco-friendly Building Materials & Products

Since the past 65 years, about 8.3 billion tons of plastics have been produced worldwide, which is equivalent to 10,000 Eiffel Towers or 35,000 Empire State Buildings. But only 9 percent of all plastics gets recycled, while the rest ends up as trash Read More ...

Lessons from Warfare to Manage Complex Marketing Projects

The fundamental definition of warfare is to compete and win over enemies with limited resources. Interestingly, it is fundamental to running a marketing function in a corporate company. My fellow marketing heads will agree that it is imperative Read More ...

New Building Material & Construction World

New Building Material & Construction World
MGS Architecture

Modern Green Structures & Architecture

Modern Green Structures & Architecture

Lifting & Specialized Transport

Lifting & Specialized Transport

Indian Infrastructure & Tenders Week

Indian Infrastructure & Tenders Week
Sign-up for Free Subscription
'India Construction Week'
Weekly e-Newsletter on Construction Industry
Get the latest news, product launches, projects announced / awarded, government policies, investments, and expert views.
Click here to subscribe.